Original PDF Flash format sunjet-150  


Sunjet 150

sunjet 150
sunjet 150
If you have any problems, please contact Smart Solar
If you have any problems, please contact Smart Solar
before returning to the place of purchase. For immediate
before returning to the place of purchase. For immediate
solar powered fountain
olar powered fountain
answers visit our website www.smartsolar.com where you
answers visit our website www.smartsolar.com where you
will find an extensive trouble shooting section with
will find an extensive trouble shooting section with
operates in direct sunlight
frequently asked questions and instant email enquiry forms.
frequently asked questions and instant email enquiry forms.
usa
usa
tel :
tel :
+1 877 550 8840
email :
email : ussupport@smartsolar.com
uk
uk
tel :
tel :
+44 (0) 8456 441 833
email :
email : uksupport@smartsolar.com
germany
germany
tel :
tel :
+49 (0)151 12744268
email :
email : servicede@smartsolar.com

smart solar ltd, gelderse weg 53, D-46399 Bocholt


europe
europe
email :
email : eusupport@smartsolar.com
australia
australia
tel :
tel : +61 03 9512 0680
email :
email : service@aspenwood.com.au
asia/ pan pacific
asia/ pan pacific
email :
email : service@tgs.co.th

www.smartsolar.com
www.smartsolar.com
Stone feature not included
2006 smart solar ltd
2006 smart solar ltd
rev. 66051118_1a
rev. 66051118_1a
ENGLISH
Sunjet 150 ,QVWUXFWLRQ 0DQXDO
Contents
Components
1. Introduction
2. Before you start
3. Overview
Fountain head set
4. Components
5. Assembling and using your product
6. Cleaning and maintenance
7. Trouble shooting
8. Spare parts
9. Full 2 year warranty
SUMMER
SPRING / AUTUMN
0-30º ANGLE
30-60º ANGLE
Introduction
Insert pump into base
PANEL ADJUSTMENT
Thank you for purchasing a Sunjet 150. These instructions contain
important information for using this product. Please keep them in a
safe place for future reference.
Before you start
1 Solar panel

2 Pump



The Sunjet 150 can be used in a small pond or water reservoir

3 Base with filter

provided the solar panel receives direct sunlight. A solar panel powers

4 2 x extension tubes with fountain head set
the pump by converting sunlight into electricity.

5 Solar panel mounting kit
The solar panel will power the pump when exposed to direct sunlight.
Impeller Pump cover
Assembling and Using Your Product
If the sun passes behind a cloud then the amount of electricity
produced by the panel will decrease and the pump will stop working
Unpack all components carefully.
or slow down. As soon as the sun reappears from behind the cloud
Please ensure that you check all parts have been removed from
the amount of electricity will increase instantly and the pump will begin
the packaging especially the solar panel, which is stored in the
to work again.
bottom of the box.
The amount of electricity produced by the solar panel is proportional
Decide on a suitable location, bearing in mind there will be some
to the strength of sunlight received. For optimum performance we
water splashes when the product is in use.
recommend that your solar panel should be exposed to as much
direct sunlight as possible and away from shady areas e.g. under
First unroll the pump cable.
Remove pump cover
trees. The panel can also be angled towards the sun to maximise the
amount of light received.
Place the pump into a container/ bowl.
Overview
Choose your favourite fountain head and attach it to the pump.
The Sunjet 150 has been designed for outdoor use. The pump drives
Fill the main bowl with water.
water up through the fountain head and sprinkles down into the
container / main bowl. The water is constantly re-cycled.
Take out impeller to clean
Solar pump connector
Sunjet 150 ,QVWUXFWLRQ 0DQXDO
ENGLISH
Please note:
Please Note: We recommend you use distilled or rain water to
prevent scale build up.
In winter the Sunjet 150 must be stored in a dry and frost proof
environment. Alternatively, an optional adapter can be purchased
Select a suitable location for you solar panel and fix the mounting
for occasional indoor use.
as shown. Connect the panel and pump together.
Solar panel & Stand Kit
The pump must never be operated dry (out of water) as this will
IMPORTANT
have a permanent adverse affect on the performance of the
To ensure the seal remains water-tight twist the pump and panels
pump.
connectors together rather than merely pressing them together.
The Sunjet 150 is now ready to use.
Spare parts
Please note: On first use there maybe air in the pump. It can take
1. Solar panel

21310AS01
up to 5 minutes until all the air is expelled and water begins to
2. Panel mounting kit

MTGKIT
sprinkle through the fountain head.
3. Pump


21400P01
Fixing The Panel Holder
4. Pump impeller

IMPELLER
Cleaning and Maintenance
5. Pump cover

PCOVER
6. Base with filter

21400BASE
Pump: If, after a period of time, the pump starts to lose power or
7. Fountain head set

2150FH
stops working check for the build up of sediment, scale or dirt in
the filter and in the bottom of the pump housing. Remove the
pump cover at its’ base. Take out the impeller and remove any
Full 2 year warranty
sediment, scale or dirt that has built up. Replace the impeller and
replace the pump cover.
If within 24 months from the date of purchase this product fails
due to a defect in material or workmanship, Smart Solar will
Solar panel: The panel should be cleaned periodically with a soft
replace or repair free of charge.
Wall Mounted Solar Panel
tissue and proprietary glass cleaning solution. Regular cleaning of
Please report immediately if there is any damage or missing
the panel is advised to maintain optimum conversion of the sun’s
pieces upon receipt of goods.
energy into direct current.
The warranty does not apply to:
Trouble Shooting
Damage caused by accidents, abuse, poor handling, frost or
If you have any problems please contact Smart Solar before
normal wear and tear. Products which have been subject to
returning to the place of purchase. For immediate answers visit
unauthorized repair or modification.
our website www.smartsolar.com where you will find an
extensive trouble shooting section with frequently asked questions
For further information please contact your nearest customer
and instant email enquiry forms.
service centre detailed on the last page of this manual.
Pump does not operate even though the solar panel is in full
Waste electrical products should not be disposed of with
sunlight
household waste. Please recycle where facilities exist. Check with
Stand Mounted Solar Panel
1) Check the connection of the pump to the solar panel. If loose
your local authority or retailer for recycling advice.
then re-connect, rotating the connectors until good contact is
made. If any of the cabling is damaged then seek a replacement.
2) Check whether the impeller is blocked by removing the pump
cover. If it is, then clean the pump as detailed above.
Smart Solar reserve the right to modify any product to enhance
Pump does operate but there is no water running through the
its’ performance and design.
hose
1) Check for the build up of sediment, scale or dirt in the filter and
in the bottom of the pump housing as detailed above.
2) Check whether the pump cover is attached properly. If the
Standing Solar Panel
pump cover is not pushed down tightly, the pump will not push
water through the fountain.

Document Outline