Projectos De Normas
projecto de normas
Junho 2009
Esta publicação tem por objectivo:
A divulgação pública dos projectos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o
período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente
elaboração, aprovação e homologação das Normas.
A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter,
durante o período de inquérito público, os pontos de vista e as contribuições nacionais.
Índice
Página
1. Projectos de normas portuguesas
1.1 Projectos em inquérito público
2
1.2 Projectos anulados
3
2. Projectos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e
do Comité Europeu para a Normalização do Ferro e do Aço (ECISS)
2.1 Projectos em inquérito público
4
2.2 Questionários preliminares
28
2.3 Comités Técnicos do CEN
29
3. Projectos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização
Electrotécnica (CENELEC)
3.1 Projectos em inquérito público
32
3.2 Propostas de anulação de Normas
48
3.3 Proposta de estudo de novas normas - "Vilamoura Procedures"
49
3.4 Questionários preliminares
50
4. Projectos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização
(CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC)
4.1 Projectos em inquérito público
51
5. Projectos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI)
5.1 Projectos em inquérito público
52
5.2 Propostas de anulação de Normas
54
6. Projectos de normas e propostas de estudo de novas Normas de Organização Internacional de
Normalização (ISO)
6.1 Projectos em inquérito público
55
6.2 Comités Técnicos da ISO
56
7. Projectos de normas e propostas de estudo de novas normas da Comissão Electrotécnica Internacional (IEC)
7.1 Projectos em inquérito público
58
8. Projectos de normas da Organização Internacional de Normalização (ISO)/Comissão Electrotécnica
Internacional (IEC)
8.1 Projectos em inquérito público
65
Rua António Gião, 2 2829-513 CAPARICA
Tel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt
projecto de normas
1. Projectos de Norma Portuguesa
Os projectos de normas estão organizadas por Grupos classificativos, indicando-se a referência e o respectivo título.
1.1 Projectos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a correspondência europeia ou internacional,
quando exista, e a data limite para a apresentação de comentários.
C250 / CT 25
ICS 67.120
prNP4437:2009
Preço: 8,75 EUR
Produtos da pesca e da aquicultura
Planos de amostragem
Data de Início do Inquerito: 2009-05-05
Data de Fim do Inquerito: 2009-06-04
C1450 / CT 145 ICS 65.020
prNP 4406:2009
Preço: 17,50 EUR
Sistemas de gestão florestal sustentável Aplicação dos
critérios pan-europeus para a gestão florestal sustentável
Data de Início do Inquerito: 2009-03-17
Data de Fim do Inquerito: 2009-05-16
Lista mensal > projectos de normas
2/70
1 Junho 2009
projecto de normas
1.2 Projectos Anulados
Para cada referência menciona-se a designação, a correspondência europeia e/ou internacional, bem como o documento
que o substitui, quando exista.
LISTA VAZIA
Lista mensal > projectos de normas
3/70
1Junho 2009
projecto de normas
2. Projectos de Norma e propostas de estudo de novas Normas do Comité
Europeu de Normalização (CEN) e do Comité Europeu para a Normalização
do Ferro e do Aço (ECISS)
Os projectos de normas e as propostas de estudo de novas normas estão organizadas por "Comités" Técnicos do CEN e
do ECISS.
2.1 Projectos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
EN 13480-3:2002 /prA 4:2009
prEN 81-21:2009
Metallic industrial piping - Part 3: Design and calculation
Safety rules for the construction and installation of lifts
Data Limite:
2009-09-09
Lifts for the transport of persons and goods Part 21: New
passenger and goods passenger lifts in existing builiding
prEN 15900:2009
Data Limite:
2009-06-15
Energy efficiency services Definitions and essential
requirements
TC 10
Data Limite:
2009-06-29
prEN 115-2:2009
Safety of escalators and moving walks Part 2: Rules for
prEN 15907:2009
the improvement of safety of existing escalators and
Film identification Enhancing interoperability of
moving walks
metadata Element sets and structures
Data Limite:
2009-06-15
Data Limite:
2009-07-26
TC 12
prEN 16001:2009
prEN ISO 28781:2009
Energy management systems Requirements with guidance
Petroleum and natural gas industries Drilling and
for use
production equipment Subsurface valves and related
Data Limite:
2009-05-05
equipment
(ISO/DIS 28781:2009)
prEN ISO 14971:2009
Data Limite:
2009-08-26
Medical devices Application of risk management to
medical devices
TC 12
(ISO 14971:2007, Corrected version 2007-10-01)
prEN ISO 14723:2009
Data Limite:
2009-05-12
Petroleum and natural gas industries Pipeline
transportation systems Subsea pipeline valves
TC 10
(ISO/FDIS 14723:2009)
prCEN/TS 81-83:2009
Data Limite:
2009-05-19
Safety rules for the construction and installation of lifts
Existing lifts Part 83: Rules for the improvement of the
TC 12
resistance against vandalism
prEN ISO 19901-6:2009
Data Limite:
2009-07-09
Petroleum and natural gas industries Specific
requirements for offshore structures Part 6: Marine
TC 10
operations
EN 81-1:1998 /prA 3:2009
(ISO/FDIS 19901-6:2009)
Safety rules for the construction and installation of lifts
Data Limite:
2009-05-12
Part 1: Electric lifts
Data Limite:
2009-07-12
TC 12
prEN ISO 19906:2009
TC 10
Petroleum and natural gas industries Arctic offshore
EN 81-2:1998 /prA 3:2009
structures (ISO/DIS 19906:2009)
Safety rules for the construction and installation of lifts
Data Limite:
2009-06-29
Part 2: Hydraulic lifts
Data Limite:
2009-07-12
TC 19
prEN 15293:2009
TC 10
Automotive fuels Ethanol (E85) automotive fuel
prEN 81-7:2009
Requirements and test methods
Safety rules for the construction and installation of lifts
Data Limite:
2009-09-09
Part 7: Rack and pinion lifts
Data Limite:
2009-07-19
TC 19
EN 15376:2007 /prA 1:2009
TC 10
Automotive fuels Ethanol as a blending component for
Lista mensal > projectos de normas
4/70
1Junho 2009
projecto de normas
petrol Requirements and test met
Durability of wood and wood-based products Efficacity of
Data Limite:
2009-06-19
preventive wood preservatives as determined by biological
tests Part 1: Specification according to use class
TC 19
Data Limite:
2009-05-19
prEN 15938:2009
Automotive fuels Ethanol blending component and ethanol
TC 47
(E85) fuel Determination of electrical conductivity
prEN 299:2009
Data Limite:
2009-09-23
Oil pressure atomizing nozzles Determination of the angle
and spray characteristics
Data Limite:
2009-06-22
TC 23
prEN 15888:2008
Transportable gas cylinders Cylinder bundles Periodic
inspection and testing
TC 52
Data Limite:
2009-05-11
EN 71-1:2005 /prA 10:2008
Safety of toys Part 1: Mechanical and physical properties
TC 23
Data Limite:
2009-05-04
prEN ISO 11114-1:2009
Transportable gas cylinders Compatibility of cylinder and
TC 52
valve materials with gas contents Part 1: Metallic
EN 71-1:2005 /prA 11:2009
materials
Safety of toys Part 1: Mechanical and physical properties
(ISO/DIS 11114-1:2009)
Data Limite:
2009-09-09
Data Limite:
2009-08-12
TC 52
TC 23
prEN 71-4:2009
prEN ISO 11114-3:2008
Safety of toys Part 4: Experimental sets for chemistry and
Transportable gas cylinders Compatibility of cylinder
related activities
and valve materials with gas contents Part 3: Autogenous
Data Limite:
2009-06-29
ignition test in oxygen atmosphere
(ISO/DIS 11114-3:2008)
TC 52
Data Limite:
2009-05-11
EN 71-5:1993 /prA 2:2009
Safety of toys Part 5: Chemical toys (sets) other than
TC 33
experimental sets
EN 12978:2003 /prA 1:2009
Data Limite:
2009-05-12
Industrial, commercial and garage doors and gates Safety
devices for power operated doors and gates
TC 52
Requirements and test methods
EN 71-8:2003 /prA 4:2009
Data Limite:
2009-05-05
Safety of toys Part 8: Swings, slides and similar activity
toys for indoor and outdoor family domestic use
TC 33
Data Limite:
2009-06-12
prEN 13633:2009
Building hardware Electrically controlled panic exit
TC 54
systems for use on escape routes Requirements and test
EN 13445-4:2002 /prA 4:2008
methods
Unfired pressure vessels Part 4: Fabrication
Data Limite:
2009-09-02
Data Limite:
2009-05-04
TC 33
TC 55
prEN 13637:2009
prEN ISO 3630-4:2009
Building hardware Electrically controlled exit systems
Dentistry Root canal instruments Part 4: Auxiliary
for use on escape routes Requirements and test methods
instruments
Data Limite:
2009-09-02
(ISO/FDIS 3630-4:2009)
Data Limite:
2009-05-19
TC 33
prEN 15887:2008
TC 55
Building hardware Uncontrolled Door Closing Devices
prEN ISO 4073:2009
for single action doors Requirements and test methods
Dentistry Information system on the location of dental
Data Limite:
2009-05-11
equipment in the working area of the oral health care
provider (ISO/FDIS 4073:2009)
TC 38
Data Limite:
2009-06-16
prA 46-1:2009
Wood preservatives Determination of the preventive
TC 55
action against recently hatched larvae of Hylotrupes
prEN ISO 7885:2009
bajalus (Linnaeus) Part 1: Application by surface
Dentistry Sterile injection needles for single use
treatment (Laboratory method)
(ISO/DIS 7885:2009)
Data Limite:
2009-09-09
Data Limite:
2009-06-29
TC 38
TC 55
prEN 46-2:2009
prEN ISO 9168:2009
Wood preservatives Determination of the preventive
Dentistry Hose connectors for air driven dental
action agaist Hylotrupes bajulus (Linnaeus) Part 2:
handpieces
Ovicidal effect (laboratory method)
(ISO/FDIS 9168:2009)
Data Limite:
2009-09-09
Data Limite:
2009-06-16
TC 38
TC 55
prEN 599-1:2009
prEN ISO 9173-2:2009
Lista mensal > projectos de normas
5/70
1Junho 2009
projecto de normas
Dentistry Extraction forceps Part 2: Functional
prEN 54-30:2009
designation
Fire detection and fire alarm systems Part 30:
(ISO/DIS 9173-2:2009)
Multi-sensor fire detectors - Point detectors using a
Data Limite:
2009-06-15
combination of carbon monoxide and heat sensors
Data Limite:
2009-08-12
TC 55
prEN ISO 10451:2009
TC 85
Dentistry Contents of technical file for dental implant
prEN ISO 4007:2009
systems
Personal protective equipment Eye and face protection
(ISO/DIS 10451:2009)
Vocabulary (ISO/DIS 4007:2009)
Data Limite:
2009-08-05
Data Limite:
2009-08-05
TC 55
TC 88
prEN ISO 11953:2009
prEN 15501:2009
Dentistry The performance of hand torque instruments for
Thermal insulation products for building equipment and
the clinical tightening of screw-retained joints in
industrial installations Factory made expanded perlite
endosseous dental implant systems (ISO/DIS
(EP) and exfoliated vermiculite (EV) products
11953:2009)
Specification
Data Limite:
2009-06-15
Data Limite:
2009-06-23
TC 55
TC 89
EN ISO 16409:2006 /prA 1:2009
prEN ISO 12567-1:2009
Dentistry Oral hygiene products Manual interdental
Thermal performance of windows and doors
brushes Amendment 1(ISO 16409:2006/DAM 1:2009)
Determination of thermal transmittance by the hot-box
Data Limite:
2009-06-29
method Part 1: Complete windows and doors (ISO/DIS
12567-1:2009)
TC 55
Data Limite:
2009-08-19
prEN ISO 22794:2009
Dentistry Implantable materials for bone filling and
TC 98
augmentation in oral and maxillofacial surgery Contents
EN 280:2001 /prA 2:2009
of a technical file (ISO 22794:2007)
Mobile elevating work platforms Design calculations
Data Limite:
2009-07-02
Stability criteria - Construction - Safety - Examination
and tests
TC 55
Data Limite:
2009-06-15
prEN ISO 27020:2009
Dentistry Brackets and tubes for use in orthodontics
TC 98
(ISO/DIS 27020:2009)
EN 1495:1997 /prA 2:2008
Data Limite:
2009-06-15
Lifting platforms Mast climbing work platforms
Data Limite:
2009-05-18
TC 55
prEN ISO 28158:2009
TC 98
Dentistry Integrated dental floss holders
EN 1570:1998 /prA 2:2008
(ISO/DIS 28158:2009)
Safety requirements for lifting tables
Data Limite:
2009-07-05
Data Limite:
2009-05-18
TC 55
TC 98
prEN ISO 28319:2009
EN 1756-2:2004 /prA 1:2008
Dentistry Laser welding (ISO/DIS 28319:2009)
Tail lifts Platform lifts for mounting on wheeled vehicles
Data Limite:
2009-06-29
- Safety requirements Part 2: Tail lifts for passengers
Data Limite:
2009-05-18
TC 55
prEN ISO 28399:2009
TC 98
Dentistry Products for external tooth bleaching
EN 1808:1999 /prA 1:2008
(ISO/DIS 28399:2009)
Safety requirements on suspended access equipment Design
Data Limite:
2009-08-26
calculations, stability criteria, construction Tests
Data Limite:
2009-05-18
TC 69
prEN 12982:2009
TC 98
Industrial valves End-to-end and centre-to-end
EN 14010:2003 /prA 1:2008
dimensions for butt welding end valves
Safety of machinery Equipment for power driven parking
Data Limite:
2009-06-16
of motor vehicles Safety and EMC requirements for
design, manufacturing, erection and commissioning
TC 72
stages
prEN 54-3:2009
Data Limite:
2009-05-18
Fire detection and fire alarm systems Part 3: Fire alarm
devices - Sounders
TC 102
Data Limite:
2009-08-19
EN 13060:2004 /prA 2:2009
Small steam sterilizers
TC 72
Data Limite:
2009-07-12
prEN 54-12:2009
Fire detection and fire alarm systems Part 12: Smoke
TC 102
detectors - Line detectors using an optical beam
EN 14180:2003 /prA 2:2009
Data Limite:
2009-09-09
Sterilizers for medical purposes Low temperature steam
and formaldehyde sterilizers Requirements and testing
TC 73
Data Limite:
2009-05-12
Lista mensal > projectos de normas
6/70
1Junho 2009
projecto de normas
Timber Structures Structural timber and glued laminated
TC 104
timber Determination of some physical and mechanical
prCEN/TS 12390-11:2009
properties
Testing hardened concrete Determination of the chloride
Data Limite:
2009-07-26
resistance of concrete, unidirectional diffusion
Data Limite:
2009-05-19
TC 124
prEN ISO 8970:2009
TC 104
Timber structures Testing of joints made with
prEN 480-13:2009
mechanical fasteners Requirements for wood density
Admixtures for concrete, mortar and grout Test methods
(ISO/DIS 8970:2009)
Part 13: Reference masonry mortar for testing mortar
Data Limite:
2009-07-26
admixtures
Data Limite:
2009-07-09
TC 124
prEN 14080:2009
TC 104
Timber structures Glued laminated timber and glued
prEN 934-3:2009
laminated solid timber Requirements
Admixtures for concrete, mortar and grout Part 3:
Data Limite:
2009-06-22
Admixtures for masonry mortar - Definitions,
requirements, conformity and marking and labelling
Data Limite:
2009-06-15
TC 107
TC 124
prEN 488:2009
prEN 14081-2:2008
District heating pipes Preinsulated bonded pipe systems
Timber structures Strength graded structural timber with
for directly buried hot water networks Steel valve
rectangular cross section Part 2: Machine grading;
assembly for steel service pipes, polyurethane thermal
additional requirements for initial type testing
insulation and outer casing of polyethylene
Data Limite:
2009-05-11
Data Limite:
2009-08-12
TC 124
TC 114
prEN 15497:2009
prEN ISO 12100:2009
Finger jointed structural timber Performance
Safety of machinery General principles for design, risk
requirements and minimum production requirements
assessment and risk reduction
Data Limite:
2009-06-23
(ISO/DIS 12100:2009)
Data Limite:
2009-07-26
TC 124
prEN 15736:2009
TC 121
Timber Structures Test methods Withdrawal capacity of
prEN ISO 2503:2009
punched metal plate fasteners in handling and erection of
Gas welding equipment Pressure regulators and pressure
prefabricated trusses
regulators with flow-metering devices for gas cylinders
Data Limite:
2009-06-16
used in welding, cutting and allied processes up to 300
bar (30 MPa) (ISO/FDIS 2503:2009)
TC 124
Data Limite:
2009-06-16
prEN 15737:2009
Timber Structures Test methods Torsional resistance of
TC 121
driving in screws
prEN ISO 14344:2009
Data Limite:
2009-06-16
Welding and allied processes Procurement of welding
consumables
TC 126
(ISO/DIS 14344:2009)
EN ISO 3822-3:1997 /prA 1:2008
Data Limite:
2009-06-09
Acoustics Laboratory tests on noise emission from
appliances and equipment used in water supply
TC 121
installations
prEN ISO 17677-1:2009
Part 3: Mounting and operating conditions for in-line
Resistance welding Vocabulary Part 1: Spot, projection
valves and appliances
and seam welding
(ISO 3822-3:1997/Damd1:2008)
(ISO/FDIS 17677-1:2009)
Data Limite:
2009-05-11
Data Limite:
2009-05-12
TC 127
TC 121
prEN 13381-4:2008
prEN ISO 26304:2009
Test methods for determining the contribution to the fire
Welding consumables Solid wire electrodes, tubular cored
resistance of structural members Part 4: Applied passive
electrodes and electrode-flux combinations for submerged
protection products to steel members
arc welding of high strength steels Classification (ISO
Data Limite:
2009-05-04
26304:2008)
Data Limite:
2009-07-05
TC 127
EN 13501-1:2007 /prA 1:2009
TC 122
Fire classification of construction products and building
prEN ISO 9241-129:2009
elements Part 1: Classification using data from reaction to
Ergonomics of human-system interaction Part 129:
fire tests
Guidance on individualization
Data Limite:
2009-06-16
(ISO/DIS 9241-129:2009)
Data Limite:
2009-08-26
TC 127
EN 13501-2:2003 /prA 1:2009
TC 124
Fire classification of construction products and building
prEN 408:2009
elements Part 2: Classification using data from fire
Lista mensal > projectos de normas
7/70
1Junho 2009
projecto de normas
resistance tests, excluding ventilation services
prEN 487:2009
Data Limite:
2009-06-16
Aluminium and aluminium alloys Rolling ingots
Specifications
TC 127
Data Limite:
2009-06-23
EN 13501-3:2005 /prA 1:2009
Fire classification of construction products and building
TC 133
elements Part 3: Classification using data from fire
prCEN/TS 15656:2009
resistance tests on products and elements used in building
Copper and copper alloys Determination of phosphorus
service installations: fire resisting ducts and fire dampers
content Spectrophotometric method
Data Limite:
2009-06-16
Data Limite:
2009-06-12
TC 127
TC 133
EN 13501-4:2007 /prA 1:2009
prEN 12163:2009
Fire classification of construction products and building
Copper and copper alloys Rod for general purposes
elements Part 4: Classification using data from fire
Data Limite:
2009-09-16
resistance tests on components of smoke control systems
Data Limite:
2009-06-16
TC 133
prEN 12164:2009
TC 127
Copper and copper alloys Rod for free machining
EN 13501-5:2005 /prA 1:2009
purposes
Fire classification of construction products and building
Data Limite:
2009-09-16
elements Part 5: Classification using data from external
fire exposure to roof tests
Data Limite:
2009-06-16
TC 133
TC 127
prEN 12165:2009
prEN 15269-2:2009
Copper and copper alloys Wrought and unwrought
Extended application of test results for fire resistance
forging stock
and/or smoke control for door, shutter and openable
Data Limite:
2009-09-16
window assemblies, including their elements of building
hardware Part 2: Fire resistance of hinged and pivoted
TC 133
steel doorsets
prEN 12166:2009
Data Limite:
2009-09-23
Copper and copper alloys Wire for general purposes
Data Limite:
2009-09-16
TC 127
prEN ISO 1182:2008
TC 133
Reaction to fire tests for building and transport
prEN 12167:2009
products Non-combustibility test (ISO/DIS 1182:2008)
Copper and copper alloys Profiles and rectangular bars
Data Limite:
2009-05-11
for general purposes
Data Limite:
2009-09-16
TC 127
prEN ISO 1716:2008
TC 133
Reaction to fire tests for building and transport
prEN 12168:2009
products Determination of the heat of combustion
Copper and copper alloys Hollow rod for free machining
(ISO/DIS 1716:2008)
purposes
Data Limite:
2009-05-11
Data Limite:
2009-09-16
TC 127
TC 133
prEN ISO 9239-1:2008
prEN 12735-1:2008
Reaction to fire tests for floorings Part 1: Determination
Copper and copper alloys Seamless, round copper tubes
of the burning behaviour using a radiant heat source
for air conditioning and refrigeration Part 1: Tubes for
(ISO/DIS 9239-1:2008)
piping systems
Data Limite:
2009-05-11
Data Limite:
2009-05-18
TC 127
TC 133
prEN ISO 11925-2:2009
prEN 12735-2:2008
Reaction to fire tests Ignitability of building products
Copper and copper alloys Seamless, round copper tubes
subjected to direct impingement of flame Part 2:
for air conditioning and refrigeration Part 2: Tubes for
Singleflame source test
equipment
(ISO/DIS 11925-2:2009)
Data Limite:
2009-05-18
Data Limite:
2009-06-15
TC 133
TC 132
prEN 13148:2009
EN 485-1:2008 /prA 1:2009
Copper and copper alloys Hot-dip tinned strip
Aluminium and aluminium alloys Sheet, strip and plate
Data Limite:
2009-07-26
Part 1: Technical conditions for inspection and delivery
Data Limite:
2009-08-19
TC 133
prEN 14938-2:2009
TC 132
Copper and copper alloys Determination of bismuth
prEN 486:2009
content Part 2: Flame atomic absorption spectrometric
Aluminium and aluminium alloys Extrusion ingots
method (FAAS)
Specifications
Data Limite:
2009-08-12
Data Limite:
2009-06-23
TC 133
TC 132
prEN 15023-3:2009
Lista mensal > projectos de normas
8/70
1Junho 2009
projecto de normas
Copper and copper alloys Determination of nickel
content Part 3: Flame atomic absorption spectrometric
TC 139
method (FAAS)
prEN ISO 1513:2008
Data Limite:
2009-08-12
Paints and varnishes Preparation of test samples
(ISO/DIS 1513:2008)
TC 133
Data Limite:
2009-05-11
prEN 15025:2009
Copper and copper alloys Determination of magnesium
TC 139
content Flame atomic absorption spectrometric method
prEN ISO 8503-1:2008
(FAAS)
Preparation of steel substrates before application of
Data Limite:
2009-08-12
paints and related products Surface roughness
characteristics of blast-cleaned steel substrates Part 1:
TC 133
Specifications and definitions for ISO surface profile
prEN 15605:2009
comparators for the assessment of abrasive
Copper and copper alloys Inductively coupled plasma
blast-cleaned surfaces (ISO/DIS 8503-1:2008)
optical emission spectrometric
Data Limite:
2009-05-11
Data Limite:
2009-08-12
TC 139
TC 133
prEN ISO 8503-2:2008
prEN 15915:2009
Preparation of steel substrates before application of
Copper and copper alloys Determination of silver
paints and related products Surface roughness
content Flame atomic absorption spectrometric method
characteristics of blast-cleaned steel substrates Part 2:
(FAAS)
Method for the grading of surface profile of abrasive
Data Limite:
2009-08-19
blast-cleaned steel - Comparator procedure (ISO/DIS
8503-2:2008)
Data Limite:
2009-05-11
TC 133
prEN 15916-2:2009
Copper and copper alloys Determination of medium
tellurium content Part 2: Flame atomic absorption
TC 139
spectrometric method (FAAS)
prEN ISO 8503-3:2008
Data Limite:
2009-08-19
Preparation of steel substrates before application of
paints and related products Surface roughness
TC 136
characteristics of blast-cleaned steel substrates Part 3:
prEN 957-6:2009
Method for the calibration of ISO surface profile
Stationary training equipment Part 6: Treadmills,
comparators and for the determination of surface
additional specific safety requirements and test methods
profile - Focusing microscope procedure (ISO/DIS
Data Limite:
2009-09-02
8503-3:2008)
Data Limite:
2009-05-11
TC 136
prEN 13451-1:2009
TC 139
Swimming pool equipment Part 1: General safety
prEN ISO 8503-4:2008
requirements and test methods
Preparation of steel substrates before application of
Data Limite:
2009-07-26
paints and related products Surface roughness
characteristics of blast-cleaned steel substrates Part 4:
TC 138
Method for the calibration of ISO surface profile
prEN 13477-2:2009
comparators and for the determination of surface
Non destructive testing acoustic emission Equipment
profile - Stylus instrument procedure (ISO/DIS
Characterisation Part 2: Verification of Operating
8503-4:2008)
Characteristic
Data Limite:
2009-05-11
Data Limite:
2009-06-22
TC 142
TC 139
EN 848-1:2007 /prA 1:2009
prEN 13523-10:2009
Safety of woodworking machines One side moulding
Coil coated metals Test methods Part 10: Resistance to
machines with rotating tools Part 1: Single spindle
fluorescent UV light and water condensation
vertical moulding machines
Data Limite:
2009-07-26
Data Limite:
2009-09-02
TC 139
TC 142
prEN 13523-21:2009
EN 848-2:2007 /prA 1:2009
Coil coated metals Test methods Part 21: Evaluation of
Safety of woodworking machines One side moulding
outdoor exposed panels
machines with rotating tool Part 2: Single spindle hand
Data Limite:
2009-06-22
fed/integrated fed routing machine
Data Limite:
2009-09-02
TC 139
prEN 13523-22:2009
TC 142
Coil coated metals Test methods Part 22: Colour
EN 848-3:2007 /prA 1:2009
difference - Visual comparison
Safety of woodworking machines One side moulding
Data Limite:
2009-06-22
machines with rotating tools Part 3: Numerically
controlled (NC) boring and routing machines
TC 139
Data Limite:
2009-06-29
prEN 13523-27:2009
Coil coated metals Test methods Part 27: Resistance to
TC 142
humid poultice (Cataplasm test)
EN 860:2007 /prEN 1:2009
Data Limite:
2009-06-02
Safety of woodworking machines One side thickness
Lista mensal > projectos de normas
9/70
1Junho 2009
projecto de normas
planing machines
EN 1870-7:2002 /prA 1:2009
Data Limite:
2009-06-15
Safety of woodworking machines Circular sawing
machines Part 7: Single blade log sawing machines with
TC 142
integrated feed table and manual loading and/or
EN 861:2007 /prA 1:2009
unloading
Safety of woodworking machines Surface planing and
Data Limite:
2009-06-29
thicknessing machines
Data Limite:
2009-06-15
TC 142
EN 1870-8:2001 /prA 1:2009
TC 142
Safety of woodworking machines Circular sawing
EN 940:1997 /prA 1:2009
machines Part 8: Single blade edging circular rip
Safety of woodworking machines Combined
sawing machines with power driven saw unit and manual
woodworking machines
loading and/or unloading
Data Limite:
2009-06-15
Data Limite:
2009-06-29
TC 142
TC 142
prEN 940:2009
EN 1870-9:2000 /prA 1:2009
Safety of woodworking machines Combined
Safety of woodworking machines Circular sawing machines
woodworking machines
Part 9: Double blade circular sawing machines for
Data Limite:
2009-06-09
cross-cutting with integrated feed and with manual
loading and/or unloading
TC 142
Data Limite:
2009-07-05
EN 1218-1:1999 /prA 1:2009
Safety of woodworking machines Tenoning machines Part
TC 142
1: Single end tenoning machines with sliding table
EN 1870-10:2003 /prA 1:2009
Data Limite:
2009-06-22
Safety of woodworking machines Circular sawing
machines Part 10: Single blade automatic and
TC 142
semiautomatic up-cutting cross-cut sawing machines
EN 1218-5:2004 /prA 1:2009
Data Limite:
2009-07-05
Safety of woodworking machines Tenoning machines Part
5: One side profiling machines with fixed table and feed
rollers or feed chain
Data Limite:
2009-06-29
TC 142
EN 1870-11:2003 /prA 1:2009
TC 142
Safety of woodworking machines Circular sawing
EN 1807:1999 /prA 1:2009
machines Part 11: Semi-automatic and automatic
Safety of woodworking machines Band sawing machines
horizontal cross-cut sawing machines with one saw unit
Data Limite:
2009-06-29
(radial arm saws)
Data Limite:
2009-07-05
TC 142
prEN 1807-1:2009
TC 142
Safety of woodworking machines Band sawing machines
EN 1870-12:2003 /prA 1:2009
Part 1: Table band saws and band re-saws
Safety of woodworking machines Circular sawing
Data Limite:
2009-08-19
machines Part 12: Pendulum cross-cut sawing machines
Data Limite:
2009-07-12
TC 142
prEN 1807-2:2009
TC 142
Safery of woodworking machines Band sawing machines
EN 1870-13:2007 /prA 1:2009
Part 2: Log sawing machines
Safety of woodworking machines Circular sawing
Data Limite:
2009-08-19
machines Part 13: Horizontal beam panel sawing
machines
TC 142
Data Limite:
2009-07-12
EN 1870-4:2001 /prA 1:2009
Safety of woodworking machines Circular sawing
TC 142
machines Part 4: Multiblade rip sawing machines with
EN 1870-14:2007 /prA 1:2009
manual loading and/or unloading
Safety of woodworking machines Circular sawing
Data Limite:
2009-06-22
machines Part 14: Vertical panel sawing machines
Data Limite:
2009-07-19
TC 142
EN 1870-5:2002 /prA 1:2009
TC 142
Safety of woodworking machines Circular sawing
EN 1870-15:2004 /prA 1:2009
machines Part 5: Circular sawbenches/up-cutting
Safety of woodworking machines Circular sawing
cross-cut sawing machines
machines Part 15: Multiblade cross-cut sawing machines
Data Limite:
2009-06-29
with integrated feed of the workpiece and manual
loading and/or unloading
TC 142
Data Limite:
2009-07-19
EN 1870-6:2002 /prA 1:2009
Safety of woodworking machines Circular sawing
TC 142
machines Part 6: Circular sawing machines for firewood
EN 1870-16:2005 /prA 1:2009
and dual purpose circular sawing machines for
Safety of woodworking machines Circular sawing
firewood/circular saw benches, with manual loading
machines Part 16: Double mitre sawing machines for
and/or unloading
Vcutting
Data Limite:
2009-07-12
Data Limite:
2009-07-16
TC 142
TC 142
Lista mensal > projectos de normas
10/70
1Junho 2009
projecto de normas
EN 1870-17:2007 /prA 1:2009
Data Limite:
2009-07-09
Safety of woodworking machines Circular sawing
machines Part 17: Manual horizontal cutting cross-cut
TC 144
sawing machines with one saw unit (manual radial arm
prEN ISO 4254-1:2009
saws)
Agricultural machinery Safety Part 1: General
Data Limite:
2009-07-19
requirements
(ISO 4254-1:2008)
TC 142
Data Limite:
2009-07-09
EN 1870-17:2007 /prA 2:2009
Safety of woodworking machines Circular sawing
TC 144
machines Part 17: Manual horizontal cutting cross-cut
prEN ISO 10517:2009
sawing machines with one saw unit (manual radial arm
Powered hand-held hedge trimmers Safety (ISO/FDIS
saws)
10517:2009)
Data Limite:
2009-07-09
Data Limite:
2009-06-23
TC 142
TC 146
EN 12750:2001 /prA 1:2009
prEN 415-9:2009
Safety of woodworking machines Four-sided moulding
Safety of packaging machines Part 9: Noise measurement
machines
methods for packaging machines, packaging lines and
Data Limite:
2009-06-15
associated equipment, grade of accuracy 2 and 3
Data Limite:
2009-06-09
TC 142
EN 12779:2004 /prA 1:2009
TC 147
Safety of woodworking machines Chips and dust
EN 13157:2004 /prA 1:2009
extraction systems with fixed installations Safety
Cranes Safety Hand powered lifting equipment
related performances and safety requirements
Data Limite:
2009-06-15
Data Limite:
2009-06-15
TC 147
TC 143
EN 14238:2004 /prA 1:2009
prEN 13743:2008
Cranes Manually controlled load manipulating devices
Safety requirements for coated abrasive products
Data Limite:
2009-06-15
Data Limite:
2009-05-04
TC 147
EN 14492-1:2006 /prA 1:2009
TC 144
Cranes Power driven winches and hoists Part 1: Power
EN 609-1:1999 /prA 2:2009
driven winches
Agricultural and forestry machinery Safety of log
Data Limite:
2009-07-05
splitters Part 1: Wedge splitters
Data Limite:
2009-06-26
TC 147
EN 14492-2:2006 /prA 1:2009
TC 144
Cranes Power driven winches and hoists Part 2: Power
EN 609-2:1999 /prA 1:2009
driven hoists
Agricultural and forestry machinery Safety of log splitters
Data Limite:
2009-07-05
Part 2: Screw splitters
Data Limite:
2009-06-26
TC 151
EN 13035-3:2003 /prA 1:2009
TC 144
Machines and plants for the manufacture, treatment and
EN 786:1996 /prA 2:2009
processing of flat glass Safety requirements Part 3:
Garden equipment Electrically powered walk-behind and
Cutting machines
hand-held lawn trimmers and lawn edge trimmers
Data Limite:
2009-06-22
Mechanical safety
Data Limite:
2009-07-09
TC 151
EN 13042-1:2007 /prA 1:2009
TC 144
Machines and plants for the manufacture, treatment and
EN 1853:1999 /prA 1:2009
processing of hollow glass Safety requirements Part 1:
Agricultural machinery Trailers with tipping body Safety
Gob feeder
Data Limite:
2009-07-02
Data Limite:
2009-09-09
TC 144
TC 151
EN 13448:2001 /prA 1:2009
EN 13042-2:2004 /prA 1:2008
Agricultural and forestry machinery Inter-row mowing
Machines and plants for the manufacture, treatment and
units Safety
processing of hollow glass Safety requirements Part 2:
Data Limite:
2009-07-09
Handling machines for feeding
Data Limite:
2009-05-04
TC 144
EN 13684:2004 /prA 2:2009
TC 151
Garden equipment Pedestrian controlled lawn aerators and
EN 13042-3:2007 /prA 1:2008
scarifiers Safety
Machines and plants for the manufacture, treatment and
Data Limite:
2009-05-05
processing of hollow glass Safety requirements Part 3:
IS machines
TC 144
Data Limite:
2009-05-18
prEN 15811:2009
Agricultural machinery Guards for moving parts of
TC 151
power transmission Guard opening with tool
EN 13042-5:2003 /prA 1:2008
(ISO/TS 28923:2007 modified)
Machines and plants for the manufacture, treatment and
Lista mensal > projectos de normas
11/70
1Junho 2009
projecto de normas
processing of hollow glass Safety requirements Part 5:
Data Limite:
2009-05-11
Presses
Data Limite:
2009-05-04
TC 155
prEN 1555-4:2008
TC 153
Plastics piping systems for the supply of gaseous fuels
EN 1974:1998 /prA 1:2009
Polyethylene (PE) Part 4: Valves
Food processing machinery Slicing machines Safety and
Data Limite:
2009-05-11
hygiene requirements
Data Limite:
2009-06-22
TC 155
prEN 1555-5:2008
TC 153
Plastics piping systems for the supply of gaseous fuels
EN 12041:2000 /prA 1:2009
Polyethylene (PE) Part 5: Fitness for purpose of the
Food processing machinery Moulders Safety and hygiene
system
requirements
Data Limite:
2009-05-11
Data Limite:
2009-06-15
TC 155
TC 153
EN ISO 15874-3:2003 /prA 1:2009
EN 12505:2000 /prA 1:2009
Plastics piping systems for hot and cold water
Food processing machinery Centrifugal machines for
installations Polypropylene (PP) Part 3: Fittings -
processing edible oils and fats Safety and hygiene
Amendment 1
requirements
(ISO 15874-3:2003/FDAM 1:2009)
Data Limite:
2009-06-22
Data Limite:
2009-06-26
TC 154
TC 160
prEN 933-8:2008
prEN 341:2009
Tests for geometrical properties of aggregates Part 8:
Personal fall protection equipment Descender devices for
Assessment of fines - Sand equivalent test
rescue
Data Limite:
2009-05-04
Data Limite:
2009-06-16
TC 154
TC 161
prEN 933-9:2008
prEN ISO 20349:2009
Tests for geometrical properties of aggregates Part 9:
Personal protective equipment Footwear protecting
Assessment of fines - Methylene blue test
against molten metal splash Requirements and test
Data Limite:
2009-05-11
methods
(ISO/DIS 20349:2009)
TC 154
Data Limite:
2009-06-09
prEN 933-10:2008
Tests for geometrical properties of aggregates Part 10:
TC 162
Assessment of fines - Grading of filler aggregates (air jet
EN ISO 13982-1:2004 /prA 1:2009
sieving)
Protective clothing for use against solid particulates
Data Limite:
2009-05-11
Part 1: Performance requirements for chemical
protective clothing providing protection to the full
TC 154
body against airborne solid particulates (type 5
prEN 1097-8:2008
clothing) Amendment 1 (ISO 13982-1:2004/DAM
Tests for mechanical and physical properties of
1:2009)
aggregates Part 8: Determination of the polished stone
Data Limite:
2009-06-22
value
Data Limite:
2009-05-11
TC 163
prEN 31:2009
TC 154
Wash basins Connecting dimensions
prEN 13383-1:2009
Data Limite:
2009-06-15
Armourstone Part 1: Specification
Data Limite:
2009-07-26
TC 163
prEN 33:2009
TC 154
WC pans and WC suites Connecting dimensions
prEN 13383-2:2009
Data Limite:
2009-06-15
Armourstone Part 2: Test methods
Data Limite:
2009-07-26
TC 164
prEN 973:2009
TC 155
Chemicals used for treatment of water intended for
prEN 1555-1:2008
human consumption Sodium chloride for regeneration of
Plastics piping systems for the supply of gaseous fuels
ion exchangers
Polyethylene (PE) Part 1: General
Data Limite:
2009-06-22
Data Limite:
2009-05-11
TC 164
TC 155
prEN 1405:2009
prEN 1555-2:2008
Chemicals used for treatment of water intended for
Plastics piping systems for the supply of gaseous fuels
human consumption Sodium alginate
Polyethylene (PE) Part 2: Pipes
Data Limite:
2009-06-23
Data Limite:
2009-05-11
TC 164
TC 155
prEN 1406:2009
prEN 1555-3:2008
Chemicals used for treatment of water intended for
Plastics piping systems for the supply of gaseous fuels
human consumption Modified starches
Polyethylene (PE) Part 3: Fittings
Data Limite:
2009-06-23
Lista mensal > projectos de normas
12/70
1Junho 2009
projecto de normas
Data Limite:
2009-08-26
TC 164
prEN 13618:2009
TC 175
Flexible hose assemblies in drinking water installations
prEN 15912:2009
Functional requirements and test methods
Energy efficiency services Definitions and essential
Data Limite:
2009-09-02
requirements
Data Limite:
2009-06-29
TC 168
prEN 13411-4:2009
TC 178
Terminations for steel wire ropes Safety Part 4: Metal
prEN 1341:2009
resin socketing
Slabs of natural stone for external paving Requirements
Data Limite:
2009-09-02
and test methods
Data Limite:
2009-08-19
TC 168
prEN 13411-8:2009
TC 178
Terminations for steel wire ropes Safety Part 8: Swage
prEN 1342:2009
terminals and swaging
Setts of natural stone for external paving Requirements
Data Limite:
2009-09-02
and test methods
Data Limite:
2009-08-19
TC 169
EN 1837:1999 /prA 1:2009
TC 178
Safety of machinery Integral lighting of machines
prEN 1343:2009
Data Limite:
2009-06-29
Kerbs of natural stone for external paving Requirements
and test methods
TC 170
Data Limite:
2009-08-19
prEN ISO 8596:2009
Ophthalmic optics Visual acuity testing Standard
TC 182
optotype and its presentation
prEN 13313:2009
(ISO/FDIS 8596:2009)
Refrigerating systems and heat pumps Competence of
Data Limite:
2009-05-26
personnel Complementary element
Data Limite:
2009-09-16
TC 170
prEN ISO 9801:2009
TC 183
Ophthalmic instruments Trial case lenses
EN 1501-1:1998 /prA 2:2009
(ISO/FDIS 9801:2009)
Refuse collection vehicles and their associated lifting
Data Limite:
2009-05-26
devices General requirements and safety requirements
Part 1: Rear-end loaded refuse collection vehicles
TC 170
Data Limite:
2009-09-09
prEN ISO 10341:2009
Ophthalmic instruments Refractor heads
TC 183
(ISO/FDIS 10341:2009)
EN 1501-2:2005 /prA 1:2009
Data Limite:
2009-05-26
Refuse collection vehicles and associated lifting devices
General requirements and safety requirements Part 2: Side
TC 170
loaded refuse collection vehicles
prEN ISO 10343:2009
Data Limite:
2009-09-09
Ophthalmic instruments Ophthalmometers
(ISO/FDIS 10343:2009)
TC 184
Data Limite:
2009-05-26
prA 623-5:2008
Advanced technical ceramics Monolithic ceramics -
TC 170
General and textural properties Part 5: Determination of
prEN ISO 10944:2009
phase volume fraction by evaluation of micrographs
Ophthalmic instruments Synoptophores (ISO/FDIS
Data Limite:
2009-05-18
10944:2009)
Data Limite:
2009-07-02
TC 184
prEN 820-4:2008
TC 170
Advanced technical ceramics Thermomechanical properties
prEN ISO 11981:2009
of monolithic ceramics Part 4: Determination of flexural
Ophthalmic optics Contact lenses and contact lens care
creep deformation at elevated temperatures
products Determination of physical compatibility of
Data Limite:
2009-05-11
contact lens care products with contact lenses
(ISO/FDIS 11981:2009)
TC 184
Data Limite:
2009-05-26
prEN 820-5:2008
Advanced technical ceramics Thermomechanical properties
TC 170
of monolithic ceramics Part 5: Determination of elastic
prEN ISO 15254:2009
moduli at elevated temperatures
Ophthalmic optics and instruments Electro-optical
Data Limite:
2009-05-11
devices for enhancing low vision
(ISO/FDIS 15254:2009)
TC 184
Data Limite:
2009-05-26
prEN 843-6:2009
Advanced technical ceramics Mechanical properties of
TC 172
monolithic ceramics at room temperature Part 6: Guidance
prEN ISO 15320:2009
for fractographic investigation
Paper, board and pulps Determination of
Data Limite:
2009-06-15
pentachlorophenol in an aqueous extract
(ISO/DIS 15320:2009)
TC 184
Lista mensal > projectos de normas
13/70
1Junho 2009
projecto de normas
prEN 1006:2008
Unshaped refractory materials Part 2: Sampling for
Advanced technical ceramics Monolithic ceramics Guidance
testing
on the selection of test pieces for the evaluation of
(ISO/DIS 1927-2:2008)
properties
Data Limite:
2009-05-04
Data Limite:
2009-05-18
TC 187
TC 184
prEN ISO 1927-3:2008
prEN 1071-9:2008
Unshaped refractory materials Part 3: Characterization as
Advanced technical ceramics Methods of test for ceramic
received
coatings Part 9: Determination of fracture strain
(ISO/DIS 1927-3:2008)
Data Limite:
2009-05-18
Data Limite:
2009-05-04
TC 184
TC 187
prEN 1071-10:2008
prEN ISO 1927-4:2008
Advanced technical ceramics Methods of test for ceramic
Unshaped refractory materials Part 4: Determination of
coatings Part 10: Determination of coating thickness by
consistency of castables
cross sectioning
(ISO/DIS 1927-4:2008)
Data Limite:
2009-05-18
Data Limite:
2009-05-04
TC 184
TC 187
prEN 10871-10:2008
prEN ISO 1927-5:2008
Advanced technical ceramics Methods of test for ceramic
Unshaped refractory materials Part 5: Preparation and
coatings Part 10: Determination of coating thickness by
treatment of test pieces
cross sectioning
(ISO/DIS 1927-5:2008)
Data Limite:
2009-05-18
Data Limite:
2009-05-04
TC 184
TC 187
prEN 14232:2009
prEN ISO 1927-6:2008
Advanced technical ceramics Terms, definitions and
Unshaped refractory materials Part 6: Measurement of
abbreviations
physical properties
Data Limite:
2009-07-19
(ISO/DIS 1927-6:2008)
Data Limite:
2009-05-04
TC 185
prEN ISO 8752:2009
TC 187
Spring-type straight pins Slotted, heavy duty
prEN ISO 1927-7:2008
(ISO/FDIS 8752:2009)
Unshaped refractory materials Part 7: Tests on
Data Limite:
2009-05-05
pre-formed shapes
(ISO/DIS 1927-7:2008)
TC 185
Data Limite:
2009-05-04
prEN ISO 10644:2009
Screw and washer assemblies made of steel with plain
TC 187
washers Washer hardness classes 200 HV and 300 HV
prEN ISO 1927-8:2008
(ISO/FDIS 10644:2009)
Unshaped refractory materials Part 8: Determination of
Data Limite:
2009-05-19
complementary properties
(ISO/DIS 1927-8:2008)
Data Limite:
2009-05-04
TC 185
prEN ISO 10673:2009
Plain washers for screw and washer assemblies Small,
TC 192
normal and large series Product grade A
prEN 1147:2008
(ISO/FDIS 10673:2009)
Portable ladders for fire service use
Data Limite:
2009-05-19
Data Limite:
2009-05-18
TC 185
TC 192
prEN ISO 13337:2009
prEN 1846-2:2009
Spring-type straight pins Slotted, light duty
Firefighting and rescue service vehicles Part 2: Common
(ISO/FDIS 13337:2009)
requirements - Safety and performance
Data Limite:
2009-05-05
Data Limite:
2009-06-02
TC 186
TC 192
EN 746-1:1997 /prA 1:2009
EN 13204:2004 /prA 1:2009
Industrial thermoprocessing equipment Part 1: Common
Double acting hydraulic rescue tools for fire and rescue
safety requirements for industrial thermoprocessing
service use Safety and performance requirements
equipment
Data Limite:
2009-09-09
Data Limite:
2009-06-15
TC 192
TC 186
prEN 15767-3:2008
prEN ISO 225:2009
Portable equipment for projecting extinguishing agents
Fasteners Bolts, screws, studs and nuts Symbols and
supplied by fire fighting pumps Portable monitors Part
designations of dimensions
3: Foam devices
(ISO/DIS 225:2009)
Data Limite:
2009-05-18
Data Limite:
2009-06-15
TC 192
TC 187
prEN 15889:2008
prEN ISO 1927-2:2008
Fire-fighting hoses Test methods
Lista mensal > projectos de normas
14/70
1Junho 2009
projecto de normas
Data Limite:
2009-05-18
TC 205
TC 197
EN 13795-1:2002 /prA 1:2009
EN 809:1998 /prA 1:2009
Surgical drapes, gowns and clean air suits, used as
Pumps and pump units for liquids Common safety
medical devices, for patients, clinical staff and
requirements
equipment
Data Limite:
2009-07-19
Part 1: General requirements for manufacturers,
processors and products
TC 200
Data Limite:
2009-05-12
EN 13112:2002 /prA 1:2009
Tannery machines Splitting and bandknife shearing
TC 205
machines Safety requirements
EN 13795-2:2004 /prA 1:2009
Data Limite:
2009-09-09
Surgical drapes, gowns and clean air suits, used as
medical devices for patients, clinical staff and equipment
TC 200
Part 2: Test methods
EN 13114:2002 /prA 1:2009
Data Limite:
2009-05-12
Tannery machines Rotating process vessels Safety
requirements
TC 205
Data Limite:
2009-09-09
EN 13795-3:2006 /prA 1:2009
Surgical drapes, gowns and clean air suits, used as
TC 201
medical devices for patients, clinical staff and equipment
EN 930:1997 /prA 2:2009
Part 3: Performance requirements and performance
Footwear, leather and imitation leather goods
levels
manufacturing machines Roughing, scouring, polishing
Data Limite:
2009-05-12
and trimming machines Safety requirements
Data Limite:
2009-06-15
TC 207
prEN 527-1:2008
TC 201
Office furniture Work tables and desks Part 1:
EN 931:1997 /prA 2:2009
Dimensions
Footwear manufacturing machines Lasting machines
Data Limite:
2009-05-11
Safety requirements
Data Limite:
2009-06-16
TC 207
prEN 12521:2009
TC 201
Furniture Strength, durability and safety Requirements
EN 12044:2005 /prA 1:2009
for domestic tables
Footwear, leather and imitation leather goods
Data Limite:
2009-06-02
manufacturing machines Cutting and punching machines
Safety requirements
TC 207
Data Limite:
2009-06-15
prEN 15939:2009
Hardware for furniture Determination of strength and
TC 201
load capacity of wall attachment devices
EN 12203:2003 /prA 1:2009
Data Limite:
2009-09-23
Footwear, leather and imitation leather goods
manufacturing machines Shoe and leather presses Safety
TC 211
requirements
prEN ISO 3741:2009
Data Limite:
2009-06-15
Acoustics Determination of sound power levels of noise
sources using sound pressure Precision methods for
TC 201
reverberation rooms
EN 12387:2005 /prA 1:2009
(ISO 3741:1999, including Cor 1:2001)
Footwear, leather and imitation leather goods
Data Limite:
2009-06-12
manufacturing machines Modular shoe repair equipment
Safety requirements
Data Limite:
2009-06-15
TC 211
prEN ISO 3743-1:2009
TC 201
Acoustics Determination of sound power levels of noise
EN 12653:1999 /prA 2:2009
sources - Engineering methods for small, movable
Footwear, leather and imitation leather manufacturing
sources in reverberant fields Part 1: Comparison method
machines Nailing machines Safety requirements
for hard-walled test rooms
Data Limite:
2009-06-15
(ISO 3743-1:1994)
Data Limite:
2009-06-12
TC 204
prEN ISO 14160:2009
TC 211
Sterilization of health care products Liquid chemical
prEN ISO 3743-2:2009
sterilizing agents for single-use medical devices
Acoustics Determination of sound power levels of noise
utilizing animal tissues and their derivatives
sources using sound pressure - Engineering methods
Requirements for characterization, development,
for small, movable sources in reverberant fields Part 2:
validation and routine control of a sterilization process
Methods for special reverberation test rooms
for medical devices (ISO/DIS 14160:2009)
(ISO 3743-2:1994)
Data Limite:
2009-09-09
Data Limite:
2009-06-12
TC 205
TC 211
prEN 455-4:2009
prEN ISO 3744:2009
Medical gloves for single use Part 4: Requirements and
Acoustics Determination of sound power levels of noise
testing for shelf life determination
sources using sound pressure Engineering method in an
Data Limite:
2009-05-19
essentially free field over a reflecting plane
Lista mensal > projectos de normas
15/70
1Junho 2009
projecto de normas
(ISO 3744:1994)
prEN ISO 11201:2009
Data Limite:
2009-06-12
Acoustics Noise emitted by machinery and equipment
Measurement of emission sound pressure levels at a work
TC 211
station and at other specified positions - Engineering
prEN ISO 3745:2009
method in an essentially free field over a reflecting plane
Acoustics Determination of sound power levels of noise
(ISO 11201:1995, including Cor 1:1997)
sources using sound pressure Precision methods for
Data Limite:
2009-06-26
anechoic and semi-anechoic rooms
(ISO 3745:2003)
TC 211
Data Limite:
2009-06-12
prEN ISO 11202:2009
Acoustics Noise emitted by machinery and equipment
TC 211
Measurement of emission sound pressure levels at a work
prEN ISO 3746:2009
station and at other specified positions - Survey method
Acoustics Determination of sound power levels of noise
in situ
sources using sound pressure Survey method using an
(ISO 11202:1995, including Cor 1:1997)
enveloping measurement surface over a reflecting plane
Data Limite:
2009-06-26
(ISO 3746:1995, including Cor 1:1995)
Data Limite:
2009-06-12
TC 211
prEN ISO 11203:2009
TC 211
Acoustics Noise emitted by machinery and equipment
prEN ISO 3747:2009
Determination of emission sound pressure levels at a
Acoustics Determination of sound power levels of noise
work station and at other specified positions from the
sources using sound pressure Comparison method in situ
sound power level (ISO 11203:1995)
(ISO 3747:2000)
Data Limite:
2009-06-26
Data Limite:
2009-06-19
TC 211
TC 211
prEN ISO 11204:2009
prEN ISO 4871:2009
Acoustics Noise emitted by machinery and equipment
Acoustics Declaration and verification of noise
Measurement of emission sound pressure levels at a work
emission values of machinery and equipment
station and at other specified positions - Method
(ISO 4871:1996)
requiring environmental corrections
Data Limite:
2009-06-19
(ISO 11204:1995, including Cor 1:1997)
Data Limite:
2009-06-26
TC 211
prEN ISO 5136:2009
TC 211
Acoustics Determination of sound power radiated into a
prEN ISO 11205:2009
duct by fans and other air-moving devices In-duct
Acoustics Noise emitted by machinery and equipment
method
Engineering method for the determination of emission
(ISO 5136:2003)
sound pressure levels in situ at the work station and at
Data Limite:
2009-06-19
other specified positions using sound intensity (ISO
11205:2003)
TC 211
Data Limite:
2009-06-26
prEN ISO 7235:2009
Acoustics Laboratory measurement procedures for ducted
TC 211
silencers and air-terminal units Insertion loss, flow noise
prEN ISO 11546-1:2009
and total pressure loss
Acoustics Determination of sound insulation
(ISO 7235:2003)
performances of enclosures Part 1: Measurements under
Data Limite:
2009-06-19
laboratory conditions (for declaration purposes)
(ISO 11546-1:1995
TC 211
Data Limite:
2009-07-02
prEN ISO 9614-1:2009
Acoustics Determination of sound power levels of noise
TC 211
sources using sound intensity Part 1: Measurement at
prEN ISO 11546-2:2009
discrete points
Acoustics Determination of sound insulation performances
(ISO 9614-1:1993)
of enclosures Part 2: Measurements in situ (for
Data Limite:
2009-06-19
acceptance and verification purposes)
(ISO 11546-2:1995)
TC 211
Data Limite:
2009-07-02
prEN ISO 9614-3:2009
Acoustics Determination of sound power levels of noise
TC 211
sources using sound intensity Part 3: Precision method
prEN ISO 11688-1:2009
for measurement by scanning
Acoustics Recommended practice for the design of
(ISO 9614-3:2002)
low-noise machinery and equipment Part 1: Planning
Data Limite:
2009-06-19
(ISO/TR 11688-1:1995)
Data Limite:
2009-07-02
TC 211
prEN ISO 11200:2009
TC 211
Acoustics Noise emitted by machinery and equipment
prEN ISO 11691:2009
Guidelines for the use of basic standards for the
Acoustics Measurement of insertion loss of ducted
determination of emission sound pressure levels at a
silencers without flow Laboratory survey method
work station and at other specified positions (ISO
(ISO 11691:1995)
11200:1995, including Cor 1:1997)
Data Limite:
2009-07-02
Data Limite:
2009-06-26
TC 211
TC 211
prEN ISO 11957:2009
Lista mensal > projectos de normas
16/70
1Junho 2009
projecto de normas
Acoustics Determination of sound insulation performance
TC 215
of cabins Laboratory and in situ measurements
EN 1282-2:2005 /prA 1:2009
(ISO 11957:1996)
Tracheostomy tubes Part 2: Paediatric tubes
Data Limite:
2009-07-02
(ISO 5366-3:2001, modified)
Data Limite:
2009-06-15
TC 211
prEN ISO 12001:2009
TC 215
Acoustics Noise emitted by machinery and equipment Rules
EN 1782:1998 /prA 1:2009
for the drafting and presentation of a noise test code
Tracheal tubes and connectors
(ISO 12001:1996)
Data Limite:
2009-06-22
Data Limite:
2009-07-02
TC 215
TC 213
EN 1820:2005 /prA 1:2009
prEN 15895-1:2009
Anaesthetic reservoir bags (ISO 5362:2000, modified)
Cartridge operated hand-held tools Safety requirements
Data Limite:
2009-06-15
Part 1: Fixing and hard making tools
Data Limite:
2009-06-22
TC 215
EN 12342:1998 /prA 1:2009
TC 214
Breathing tubes intended for use with anaesthetic
EN ISO 11111-1:2005 /prA 1:2009
apparatus and ventilators
Textile machinery Safety requirements Part 1: Common
Data Limite:
2009-06-29
requirements - Amendment 1
(ISO 11111-1:2005/FDAM 1:2009)
TC 215
Data Limite:
2009-06-02
EN 13544-1:2007 /prA 1:2009
Respiratory therapy equipment - Part 1: Nebulizing
TC 214
systems and their components
EN ISO 11111-2:2005 /prA 1:2009
Data Limite:
2009-06-22
Textile machinery Safety requirements Part 2: Spinning
preparatory and spinning machines - Amendment 1
TC 215
(ISO 11111-2:2005/FDAM 1:2009)
EN 13544-2:2002 /prA 1:2009
Data Limite:
2009-06-02
Respiratory therapy equipment Part 2: Tubing and
connectors
TC 214
Data Limite:
2009-06-29
EN ISO 11111-3:2005 /prA 1:2009
Textile machinery Safety requirements Part 3:
TC 215
Nonwoven machinery - Amendment 1
EN 13544-3:2001 /prA 1:2009
(ISO 11111-3:2005/FDAM 1:2009)
Respiratory therapy equipment Part 3: Air entrainment
Data Limite:
2009-06-02
devices
Data Limite:
2009-06-29
TC 214
EN ISO 11111-4:2005 /prA 1:2009
TC 215
Textile machinery Safety requirements Part 4: Yarn
prEN 15908:2009
processing, cordage and rope manufacturing machinery
Anaesthetic and respiratory equipment
- Amendment 1
Non-interchangeable screw-threaded (NIST) low-pressure
(ISO 11111-4:2005/FDAM 1:2009)
connectors for medical gases
Data Limite:
2009-06-02
Data Limite:
2009-07-26
TC 214
TC 215
EN ISO 11111-5:2005 /prA 1:2009
prEN 15908:2009
Textile machinery Safety requirements Part 5:
Anaesthetic and respiratory equipment
Preparatory machinery to weaving and knitting -
Non-interchangeable screw-threaded (NIST) low-pressure
Amendment 1
connectors for medical gases
(ISO 11111-5:2005/FDAM 1:2009)
Data Limite:
2009-07-26
Data Limite:
2009-06-02
TC 215
TC 214
EN ISO 7396-1:2007 /prA 2:2009
EN ISO 11111-6:2005 /prA 1:2009
Medical gas pipeline systems Part 1: Pipeline systems
Textile machinery Safety requirements Part 6: Fabric
for compressed medical gases and vacuum
manufacturing machinery - Amendment 1
Amendment 2 (ISO 7396-1:2007/DAM 2:2009)
(ISO 11111-6:2005/FDAM 1:2009)
Data Limite:
2009-07-12
Data Limite:
2009-06-02
TC 215
TC 214
prEN ISO 26782:2009
EN ISO 11111-7:2005 /prA 1:2009
Anaesthetic and respiratory equipment Spirometers
Textile machinery Safety requirements Part 7: Dyeing
intended for the measurement of time forced expired
and finishing machinery - Amendment 1
volumes in humans
(ISO 11111-7:2005/FDAM 1:2009)
(ISO/FDIS 26782:2009)
Data Limite:
2009-06-02
Data Limite:
2009-06-16
TC 215
TC 216
EN 794-3:1998 /prA 2:2009
prEN 1276:2009
Lung ventilators Part 3: Particular requirements for
Chemical disinfectants and antiseptics Quantitative
emergency and transport ventilators
suspension test for the evaluation of bactericidal
Data Limite:
2009-06-22
activity of chemical disinfectants and antiseptics used in
food, industrial, domestic and institutional areas Test
Lista mensal > projectos de normas
17/70
1Junho 2009
projecto de normas
method and requirements (phase 2, step 1)
pavement surface using a device with longitudinal
Data Limite:
2009-05-19
controlled slip (LFCA): The ADHERA
Data Limite:
2009-05-26
TC 216
prEN 1656:2009
TC 227
Chemical disinfectants and antiseptics Quantitative
prCEN/TS 15901-4:2009
suspension test for the evaluation of bactericidal
Road and airfield surface characteristics Part 4:
activity of chemical disinfectants and antiseptics used
Procedure for determining the skid resistance of
in the veterinary area Test method and requirements
pavements using a device with longitudinal controlled
(phase 2, step 1
slip (LFCT): Tatra Runway Tester (TRT)
Data Limite:
2009-08-19
Data Limite:
2009-05-26
TC 216
TC 227
EN 14476:2005 /prA 2:2009
prCEN/TS 15901-5:2009
Chemical disinfectants and antiseptics Virucidal
Road and airfield surface characteristics Part 5:
quantitative suspension test for chemical disinfectants
Procedure for determining the skid resistance of a
and antiseptics used in human medicine Test method and
pavement surface using a device with longitudinal
requirements (phase 2, step 1)
controlled slip (LFCRDK): ROAR (Road Analyser and
Data Limite:
2009-09-02
Recorder of
Data Limite:
2009-05-19
TC 218
prEN ISO 30013:2009
TC 227
Rubber and thermoplastics hoses Methods of exposure to
prCEN/TS 15901-6:2009
laboratory light sources Determination of changes in
Road and airfield surface characteristics Part 6:
colour, appearance and other physical properties
Procedure for determining the skid resistance of a
(ISO/DIS 30013:2009)
pavement surface by measurement of the sideway force
Data Limite:
2009-08-19
coefficient (SFCs): SCRIM
Data Limite:
2009-05-26
TC 224
prEN 1332-1:2009
TC 227
Identification card systems Human-machine interface Part
prCEN/TS 15901-7:2009
1: Design principles for the user interface
Road and airfield surface characteristics Part 7:
Data Limite:
2009-05-19
Procedure for determining the skid resistance of a
pavement surface using a device with longitudinal fixed
TC 226
slip ratio (LFCG): the GripTester(r)
prEN 12899-6:2008
Data Limite:
2009-05-26
Fixed vertical road traffic signs Part 6: Visual
performance of retroreflective sheeting materials
TC 227
Data Limite:
2009-05-18
prCEN/TS 15901-8:2009
Road and airfield surface characteristics Part 8:
TC 226
Procedure for determining the skid resistance of a
EN 12966-1:2005 /prA 1:2009
pavement surface by measurement of the sideway-force
Road vertical signs Variable message traffic signs Part
coefficient (SFCD): SKM
1: Product standard
Data Limite:
2009-05-26
Data Limite:
2009-09-02
TC 227
TC 227
prCEN/TS 15901-9:2009
prCEN/TS 13036-2:2009
Road and airfield surface characteristics Part 9:
Road and airfield surface characteristics Test methods
Procedure for determining the skid resistance of a
Part 2: Assessment of the skid resistance of a road
pavement surface by measurement of the longitudinal
pavement surface by the use of dynamic measuring
friction coefficient (LFCD): DWWNL skid resistance
systems
trailer
Data Limite:
2009-05-05
Data Limite:
2009-05-26
TC 227
TC 227
prCEN/TS 15901-1:2009
prCEN/TS 15901-10:2009
Road and airfield surface characteristics Part 1:
Road and airfield surface characteristics Part 10:
Procedure for determining the skid resistance of a
Procedure for determining the skid resistance of a
pavement surface using a device with longitudinal fixed
pavement surface using a device with longitudinal
slip ratio (LFCS): RoadSTAR
block measurement (LFCSK): the Skiddometer BV-8
Data Limite:
2009-05-26
Data Limite:
2009-05-26
TC 227
prCEN/TS 15901-2:2009
Road and airfield surface characteristics Part 2:
TC 227
Procedure for determining the skid resistance of a
prEN 12697-5:2009
pavement surface using a device with longitudinal
Bituminous mixtures Test methods for hot mix asphalt
controlled slip (LFCRNL): ROAR (Road Analyser and
Part 5: Determination of the maximum density
Recorder of Norsemeter)
Data Limite:
2009-09-09
Data Limite:
2009-05-19
TC 227
TC 227
prEN 12697-46:2009
prCEN/TS 15901-3:2009
Bituminous mixtures Test methods for hot mix asphalt
Road and airfield surface characteristics Part 3:
Part 46: Low Temperature Cracking and Properties by
Procedure for determining the skid resistance of a
Uniaxial Tension Tests
Lista mensal > projectos de normas
18/70
1Junho 2009
projecto de normas
Data Limite:
2009-09-02
Definitions, requirements and test methods
Data Limite:
2009-05-05
TC 227
prEN 12697-47:2009
TC 241
Bituminous mixtures Test methods for hot mix asphalt
EN 15283-1:2008 /prA 1:2009
Part 47: Determination of the ash content of lake asphalt
Gypsum boards with fibrous reinforcement Definitions,
Data Limite:
2009-07-19
requirements and test methods Part 1: Gypsum boards
with mat reinforcement
TC 227
Data Limite:
2009-05-19
prEN 14188-4:2009
Joint fillers and sealants Part 4: Specifications for
TC 241
primers to be used with joint sealants
EN 15283-2:2008 /prA 1:2009
Data Limite:
2009-05-05
Gypsum boards with fibrous reinforcement Definitions,
requirements and test methods Part 2: Gypsum fibre
TC 227
board
prEN 15466-1:2009
Data Limite:
2009-05-19
Primers for cold and hot applied joint sealants Part 1:
Determination of homogeneity
TC 247
Data Limite:
2009-05-05
prEN 14908-6:2009
Anaesthetic and respiratory equipment
TC 227
Non-interchangeable screw-threaded (NIST) low-pressure
prEN 15466-2:2009
connectors for medical gases
Primers for cold and hot applied joint sealants Part 2:
Data Limite:
2009-07-26
Determination of resistance against alkali
Data Limite:
2009-05-05
TC 248
prCEN/TR 15917:2009
TC 229
Textiles Cosmetotextiles
EN 13693:2004 /prA 1:2008
Data Limite:
2009-07-02
Precast concrete products Special roof elements
Data Limite:
2009-05-18
TC 248
prEN 15777:2009
TC 230
Textiles Test method for phthalates
prEN 15708:2009
Data Limite:
2009-06-16
Water quality Guidance standard for the surveying,
sampling and laboratory analysis of phytobenthos in
TC 248
shallow running water
prEN 15930:2009
Data Limite:
2009-09-09
Fibres Elasticity of fibres Test methods
Data Limite:
2009-09-02
TC 230
prEN 15910:2009
TC 248
Water quality Guidance on the estimation of fish
prEN ISO 105-C08:2009
abundance with mobile hydroacoustic methods
Textiles Tests for colour fastness Part C08: Colour
Data Limite:
2009-08-12
fastness to domestic and commercial laundering using a
non-phosphate reference detergent incorporating a low
TC 230
temperature bleach activator (ISO/DIS 105-C08:2009)
prEN ISO 5667-23:2009
Data Limite:
2009-06-15
Water quality Sampling Part 23: Determination of
priority pollutants in surface water using passive
TC 248
sampling
prEN ISO 105-E01:2009
(ISO/DIS 5667-23:2009)
Textiles Tests for colour fastness Part E01: Colour
Data Limite:
2009-09-02
fastness to water
(ISO/DIS 105-E01:2009)
TC 230
Data Limite:
2009-07-26
prEN ISO 7887:2009
Water quality Examination and determination of colour
TC 248
(ISO/DIS 7887:2009)
prEN ISO 105-E03:2009
Data Limite:
2009-09-02
Textiles Tests for colour fastness Part E03: Colour
fastness to chlorinated water (swimming-pool water)
TC 232
(ISO/DIS 105-E03:2009)
EN 1012-2:1996 /prA 1:2009
Data Limite:
2009-07-26
Compressors and vacuum pumps Safety requirements
Part 2: Vacuum pumps
TC 248
Data Limite:
2009-07-05
prEN ISO 105-E07:2009
Textiles Tests for colour fastness Part E07: Colour
fastness to spotting by water
(ISO/DIS 105-E07:2009
TC 241
Data Limite:
2009-07-26
EN 520:2004 /prA 1:2009
Gypsum plasterboards Definitions, requirements and test
TC 248
methods
prEN ISO 105-E09:2009
Data Limite:
2009-05-19
Textiles Tests for colour fastness Part E09: Colour
fastness to boiling water
TC 241
(ISO/DIS 105-E09:2009)
EN 14566:2008 /prA 1:2009
Data Limite:
2009-07-26
Mechanical fasteners for gypsum plasterboard systems
Lista mensal > projectos de normas
19/70
1Junho 2009
projecto de normas
TC 248
prEN 15892:2009
prEN ISO 105-E12:2009
Railway applications Noise Emission Measurement of
Textiles Tests for colour fastness Part E12: Colour
noise inside driver's cab
fastness to alkaline milling
Data Limite:
2009-06-15
(ISO/DIS 105-E12:2009)
Data Limite:
2009-07-26
TC 256
prEN ISO 14155-2:2009
TC 248
Clinical investigation of medical devices for human
prEN ISO 3758:2009
subjects Part 2: Clinical investigation plans
Textiles Care labelling code using symbols
(ISO 14155-2:2003)
(ISO/DIS 3758:2009)
Data Limite:
2009-05-26
Data Limite:
2009-08-05
TC 258
TC 249
prEN ISO 14155-1:2009
prEN ISO 527-5:2009
Clinical investigation of medical devices for human
Plastics Determination of tensile properties Part 5: Test
subjects Part 1: General requirements
conditions for unidirectional fibre-reinforced plastic
(ISO 14155-1:2003)
composites
Data Limite:
2009-05-26
(ISO/FDIS 527-5:2009)
Data Limite:
2009-05-12
TC 260
prCEN/TS 15919:2009
TC 249
Fertilizers Extraction of phosphorus soluble in 2 %
prEN ISO 1043-1:2008
formic acid
Plastics Symbols and abbreviated terms Part 1: Basic
Data Limite:
2009-07-02
polymers and their special characteristics
(ISO/DIS 1043-1:2008)
TC 260
Data Limite:
2009-05-18
prCEN/TS 15920:2009
Fertilizers Extraction of phosphorus soluble in 2 % citric
TC 249
acid
prEN 1043-2:2008
Data Limite:
2009-07-02
Plastics Symbols and abbreviated terms Part 2: Fillers
and reinforcing materials
TC 260
(ISO/DIS 1043-2:2008)
prCEN/TS 15921:2009
Data Limite:
2009-05-18
Fertilizers Extraction of phosphorus according to
Petermann at 65 °C
TC 249
Data Limite:
2009-07-02
prEN ISO 1889:2009
Reinforcement yarns Determination of linear density
TC 260
(ISO/FDIS 1889:2009)
prCEN/TS 15922:2009
Data Limite:
2009-05-12
Fertilizers Extraction of phosphorus according to
Petermann at ambient temperature
TC 249
Data Limite:
2009-07-02
EN ISO 4892-2:2006 /prA 1:2009
Plastics Methods of exposure to laboratory light
TC 260
sources Part 2: Xenon-arc lamps - Amendment 1
prCEN/TS 15923:2009
(ISO 4892- 2:2006/FDAmd 1:2009)
Fertilizers Extraction of phosphorus soluble in Joulie's
Data Limite:
2009-06-16
alcaline ammonium citrate
Data Limite:
2009-07-02
TC 249
EN ISO 11161:2007 /prA 1:2008
TC 260
Safety of machinery Integrated manufacturing systems
prCEN/TS 15924:2009
- Basic requirements Amendment 1 (ISO
Fertilizers Determination of the fineness of grinding of
11161:2007/DAM 1:2008)
soft natural phosphates
Data Limite:
2009-05-18
Data Limite:
2009-07-02
TC 249
TC 260
prEN ISO 15512:2009
prCEN/TS 15925:2009
Plastics Determination of water content
Fertilizers Extraction of total sulfur present in various
(ISO 15512:2008)
forms
Data Limite:
2009-05-19
Data Limite:
2009-07-02
TC 254
TC 260
EN 13707:2004 /prA 1:2008
prCEN/TS 15926:2009
Flexible sheets for waterproofing Reinforced bitumen
Fertilizers Extraction of water soluble sulfur where the
sheets for roof waterproofing Definitions and
sulfur is in various forms
characteristics
Data Limite:
2009-07-02
Data Limite:
2009-05-11
TC 260
TC 256
prEN 15749:2009
prEN 15877-1:2009
Fertilizers Determination of sulfates content using three
Railway applications Marking on railway vehicles Part
different methods
1: Freight wagons
Data Limite:
2009-08-19
Data Limite:
2009-06-15
TC 260
TC 256
prEN 15750:2009
Lista mensal > projectos de normas
20/70
1Junho 2009
projecto de normas
Fertilizers Determination of total nitrogen in fertilizers
containing nitrogen only as nitric, ammoniacal and urea
TC 270
nitrogen by two different methods
prEN ISO 14314:2009
Data Limite:
2009-08-19
Reciprocal internal combustion engines Recoil starting
equipment General safety requirements
TC 260
(ISO 14314:2004)
prEN 15905:2009
Data Limite:
2009-07-02
Fertilizers Determination of 3-methylpyrazole (MP)
using high-performance liquid chromatography (HPLC)
TC 271
Data Limite:
2009-07-19
EN 1953:1998 /prA 1:2009
Atomising and spraying equipment for coating materials
TC 260
Safety requirements
prEN 15909:2009
Data Limite:
2009-06-29
Fertilizers Determination of calcium and formate in
calcium foliar fertilizers
TC 271
Data Limite:
2009-07-26
EN 12215:2004 /prA 1:2009
Coating plants Spray booths for application of organic
TC 260
liquid coating materials Safety requirements
prEN 15928:2009
Data Limite:
2009-06-15
Fertilizers Determination of the fineness of grinding (dry
procedure)
TC 275
Data Limite:
2009-08-26
prCEN/TS 15606:2009
Foodstuffs Determination of acesulfame-K, aspartame,
TC 261
neohesperidine-dihydrochalcone and saccharin High
prEN 12707:2009
performance liquid chromatographic method
Plastics drums Non-removable head (tight head) drums
Data Limite:
2009-05-19
with a nominal capacity of 210 l and 225 l
Data Limite:
2009-05-26
TC 275
prEN 13751:2008
TC 261
Foodstuffs Detection of irradiated food using
prEN 12714:2009
photostimulated luminescenc
Plastics drums Removable head (open head) drums with a
Data Limite:
2009-05-18
nominal capacity of 25 L to 60 L
Data Limite:
2009-05-26
TC 275
prEN 15890:2009
TC 261
Foodstuffs Determination of patulin in fruit juice and
prEN 13029:2009
fruit based puree for young children HPLC method with
Packaging Light-gauge metal packaging Apertures for
liquid/liquid partition cleanup and solid phase
plug-in plastic closures
extraction and UV detection
Data Limite:
2009-09-09
Data Limite:
2009-06-15
TC 261
TC 275
prEN 14634:2009
prEN 15891:2009
Glass packaging 26 H 180 crown finish Dimensions
Foodstuffs Determination of deoxynivalenol in cereals,
Data Limite:
2009-07-19
cereal products and cereal based foods for infants and
young children - HPLC method with immunoaffinity
TC 261
column cleanup and UV detection
prEN 14635:2009
Data Limite:
2009-06-15
Glass packaging 26 H 126 crown finish Dimensions
Data Limite:
2009-07-19
TC 275
prEN 15911:2009
TC 261
Foodstuffs Simultaneous determination of nine
prEN 15904:2009
sweeteners by high performance liquid chromatography
Glass packaging Standard tolerances for flaconnage
and evaporative light scattering detection
Data Limite:
2009-07-19
Data Limite:
2009-08-12
TC 261
TC 275
prEN ISO 445:2009
prEN ISO 13720:2009
Pallets for materials handling Vocabulary (ISO
Meat and meat products Enumeration of presumptive
445:2008)
Pseudomonas spp.
Data Limite:
2009-07-26
(ISO/DIS 13720:2009)
Data Limite:
2009-07-05
TC 263
prEN 1047-2:2009
TC 276
Secure storage units Classification and methods of test
prEN 12829:2009
for resistance to fire Part 2: Data rooms and data
Surface active agents Preparation of water with known
container
calcium and magnesium hardness
Data Limite:
2009-06-22
Data Limite:
2009-09-09
TC 264
TC 278
prEN 1948-4:2009
prEN ISO 17573:2009
Stationary source emissions Determination of the mass
Electronic fee collection Systems architecture for vehicle
concentration of PCDDs/PCDFs and dioxin-like PCBs
related tolling
Part 4: Sampling and analysis of dioxin-like PCBs
(ISO/DIS 17573:2009)
Data Limite:
2009-09-16
Data Limite:
2009-06-15
Lista mensal > projectos de normas
21/70
1Junho 2009
projecto de normas
prEN ISO 19142:2009
TC 278
Geographic information Web Feature Service
prEN ISO 24534-1:2008
(ISO/DIS 19142:2009)
Automatic vehicle and equipment identification
Data Limite:
2009-08-26
Electronic Registration Identification (ERI) for
vehicles Part 1: Architecture (ISO/DIS 24534-1:2008)
TC 287
Data Limite:
2009-05-11
prEN ISO 19146:2008
Geographic information Cross-domain vocabularies
TC 278
(ISO/DIS 19146:2008)
prEN ISO 24534-2:2008
Data Limite:
2009-05-04
Automatic vehicle and equipment identification
Electronic Registration Identification (ERI) for
TC 288
vehicles Part 2: Operational requirements (ISO/DIS
prEN 1536:2008
24534-2:2008)
Execution of special geotechnical work Bored piles
Data Limite:
2009-05-11
Data Limite:
2009-05-11
TC 278
TC 288
prEN ISO 24534-3:2008
prEN 1538:2008
Automatic vehicle and equipment identification
Execution of special geotechnical work Diaphragm walls
Electronic Registration Identification (ERI) for
Data Limite:
2009-05-11
vehicles Part 3: Vehicle data (ISO/DIS 24534-3:2008)
Data Limite:
2009-05-11
TC 289
prEN ISO 17072-2:2009
TC 278
Leather Chemical determination of metal content Part 2:
prEN ISO 24534-4:2008
Total metal content
Automatic vehicle and equipment identification
(ISO/DIS 17072-2:2009)
Electronic Registration Identification (ERI) for
Data Limite:
2009-07-19
vehicles Part 4: Secure communications using
asymmetrical techniques
TC 293
(ISO/DIS 24534-4:2008)
prEN 12183:2009
Data Limite:
2009-05-11
Manual wheelchairs Requirements and test methods
Data Limite:
2009-07-26
TC 282
prEN ISO 28460:2009
TC 293
Petroleum and natural gas industries Installation and
prEN 12184:2009
equipment for liquefied natural gas Ship-to-shore
Electrically powered wheelchairs, scooters and their
interface and port operations
chargers Requirements and test methods
(ISO/DIS 28460:2009)
Data Limite:
2009-07-26
Data Limite:
2009-06-15
TC 295
TC 285
prEN 15544:2008
EN ISO 7439:2002 /prA 1:2009
One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared
Copper-bearing intra-uterine contraceptive devices
stoves)
Requirements, tests Amendment 1
Dimensioning
(ISO 7439:2002/FDAmd 1:2009)
Data Limite:
2009-05-18
Data Limite:
2009-05-12
TC 299
TC 285
prEN ISO 17072-1:2009
prEN ISO 14602:2009
Leather Chemical determination of metal content Part 1:
Non-active surgical implants Implants for
Extractable metals
Osteosynthesis Particular requirements (ISO/DIS
(ISO/DIS 17072-1:2009)
14602:2009)
Data Limite:
2009-07-19
Data Limite:
2009-09-09
TC 305
TC 285
prEN 1127-1:2009
prEN ISO 16061:2009
Explosive atmospheres Explosion prevention and
Instrumentation for use in association with non-active
protection Part 1: Basic concepts and methodology
surgical implants General requirements
Data Limite:
2009-08-26
(ISO 16061:2008)
Data Limite:
2009-06-19
TC 305
prEN 13463-5:2009
TC 287
Non-electrical equipment intended for use in potentially
prEN ISO 6709:2008
explosive atmospheres Part 5: Protection by constructional
Standard representation of geographic point location by
safety 'c'
coordinates
Data Limite:
2009-08-26
(ISO 6709:2008)
Data Limite:
2009-05-11
TC 305
EN 14034-1:2004 /prA 1:2009
TC 287
Determination of explosion characteristics of dust
prEN ISO 19141:2009
clouds Part 1: Determination of the maximum explosion
Geographic information Schema for moving features
pressure pmax of dust clouds
(ISO 19141:2008)
Data Limite:
2009-06-15
Data Limite:
2009-06-29
TC 305
TC 287
EN 14034-2:2006 /prA 1:2009
Lista mensal > projectos de normas
22/70
1Junho 2009
projecto de normas
Determination of explosion characteristics of dust
post-column derivatisation
clouds Part 2: Determination of the maximum rate of
Data Limite:
2009-06-02
explosion pressure rise (dp/dt)max of dust clouds
Data Limite:
2009-06-15
TC 327
prEN 15782:2009
TC 305
Animal feeding stuffs Determination of nicarbazin
EN 14034-3:2006 /prA 1:2009
High-performance liquid chromatographic method
Determination of explosion characteristics of dust clouds
Data Limite:
2009-06-02
Part 3: Determination of the lower explosion limit LEL of
dust clouds
TC 327
Data Limite:
2009-06-15
prEN ISO 6498:2009
Animal feeding stuffs Guidelines for sample preparation
TC 305
(ISO/DIS 6498:2009)
EN 14034-4:2004 /prA 1:2009
Data Limite:
2009-09-09
Determination of explosion characteristics of dust
clouds Part 4: Determination of the limiting oxygen
TC 327
concentration LOC of dust clouds
prEN ISO 30024:2009
Data Limite:
2009-06-15
Animal feeding stuffs Determination of phytase activity
(ISO/FDIS 30024:2009)
TC 307
Data Limite:
2009-06-16
prEN ISO 659:2009
Oilseeds Determination of oil content (Reference
TC 332
method)
prEN ISO 4787:2008
(ISO/FDIS 659:2009)
Laboratory glassware Volumetric instruments Methods for
Data Limite:
2009-06-02
testing of capacity and for use
(ISO/DIS 4787:2008)
TC 307
Data Limite:
2009-05-18
prEN ISO 17059:2009
Oilseeds Extraction of oil and preparation of methyl esters
TC 333
of triglyceride fatty acids for analysis by gas
prEN 15918:2009
chromatography (Rapid method) (ISO 17059:2007)
Cycles Bicycle trailers Safety requirements and test
Data Limite:
2009-06-22
methods
Data Limite:
2009-08-26
TC 308
prEN ISO 5667-13:2009
TC 335
Water quality Sampling Part 13: Guidance on sampling
prEN 14774-1:2009
of sludges from sewage and water-treatment works
Solid biofuels Determination of moisture content - Oven
(ISO/DIS 5667-13:2009)
dry method Part 1: Total moisture - Reference method
Data Limite:
2009-09-09
Data Limite:
2009-08-19
TC 308
TC 335
prEN ISO 5667-15:2009
prEN 14774-3:2009
Water quality Sampling Part 15: Guidance on the
Solid biofuels Determination of moisture content - Oven
preservation and handling of sludge and sediment
dry method Part 3: Moisture in general analysis sample
samples
Data Limite:
2009-08-19
(ISO/FDIS 5667-15:2009)
Data Limite:
2009-06-23
TC 335
prEN 14775:2009
TC 315
Solid biofuels Determination of ash content
prCEN/TR 15913:2009
Data Limite:
2009-09-02
Layout criteria for viewing area for spectators with
special needs
TC 335
Data Limite:
2009-06-12
prEN 14918:2009
Solid biofuels Determination of calorific value
TC 318
Data Limite:
2009-09-09
prEN 13798:2009
Hydrometry Specification for a reference raingauge pit
TC 335
Data Limite:
2009-06-15
prEN 15103:2009
Solid biofuels Determination of bulk density
TC 319
Data Limite:
2009-09-09
prEN 15331:2009
Criteria for design, management and control of
TC 335
maintenance services for buildings
prEN 15148:2009
Data Limite:
2009-07-12
Solid biofuels Determination of the content of volatile
matter
TC 325
Data Limite:
2009-09-02
prCEN/TR 14383-5:2009
Prevention of crime Urban planning and building design
TC 335
Part 5: Petrol stations
prEN 15210-1:2009
Data Limite:
2009-07-09
Solid biofuels Determination of mechanical durability of
pellets and briquettes Part 1: Pellets
TC 327
Data Limite:
2009-09-09
prEN 15781:2009
Animal feeding stuffs Determination of
TC 336
maduramicin-ammonium by reversed-phase HPLC using
prEN 14774-2:2009
Lista mensal > projectos de normas
23/70
1Junho 2009
projecto de normas
Solid biofuels Determination of moisture content - Oven
assessment of buildings Part 2: Framework for the
dry method Part 2: Total moisture - Simplified method
assessment of environmental performance
Data Limite:
2009-09-02
Data Limite:
2009-06-22
TC 336
TC 352
prEN 15322:2009
prEN ISO 10808:2009
Bitumen and bituminous binders Framework for
Nanotechnologies Characterization of nanoparticles in
specifying cut-back and fluxed bituminous binders
inhalation exposure chambers for inhalation toxicity
Data Limite:
2009-06-16
testing Complementary element
(ISO 10808:2009)
TC 337
Data Limite:
2009-08-19
prCEN/TS 15366:2009
Winter and road service area maintenance equipment
TC 352
Solid absorbents intended for road usage
prEN ISO 29701:2009
Data Limite:
2009-07-09
Nanotechnologies Endotoxin test on nanomaterial samples
for in vitro systems Limulus amebocyte lysate (LAL) test
TC 337
(ISO/DIS 29701:2009)
prEN 15429-2:2009
Data Limite:
2009-09-09
Sweepers Part 2: Performance requirements and test
methods
TC 380
Data Limite:
2009-07-12
prEN 15927:2009
Services offered by hearing aid professionals
TC 337
Data Limite:
2009-08-26
prEN 15518-1:2009
Winter maintenance equipment Road weather information
TC CSC01
systems Part 1: Global definitions and components
prEN ISO 676:2009
Data Limite:
2009-06-22
Spices and condiments Botanical nomenclature (ISO
676:1995, including Cor 1:1997)
TC 337
Data Limite:
2009-05-05
prEN 15518-2:2009
Winter maintenance equipment Road weather information
TC CSC01
systems Part 2: Road weather - Recommended
prEN ISO 939:2009
observation and forecast
Spices and condiments Determination of moisture
Data Limite:
2009-06-22
content Entrainment method
(ISO 939:1980)
TC 337
Data Limite:
2009-05-05
prEN 15518-3:2009
Winter maintenance equipment Road weather information
TC CSC01
systems Part 3: Requirements on measured values of
prEN ISO 948:2009
stationary equipments
Spices and condiments Sampling (ISO 948:1980)
Data Limite:
2009-06-22
Data Limite:
2009-05-05
TC 337
TC CSC01
prEN 15906:2009
prEN ISO 3218:2009
Winter maintenance equipment Snow removal machines
Essential oils Principles of nomenclature
with rotating tools Specification and clearing capacity
(ISO 3218:1976)
Data Limite:
2009-07-26
Data Limite:
2009-05-05
TC 344
TC CSF01
prEN 15878:2008
EN ISO 5457:1999 /prEN ISO 1:2009
Steel static storage systems Adjustable pallet racking
Technical product documentation Sizes and layout of
Terms and definitions
drawing sheets Amendment 1 (ISO 5457:1999/DAmd
Data Limite:
2009-05-11
1:2009)
Data Limite:
2009-07-19
TC 346
prEN 15886:2008
TC CSC01
Conservation of cultural property Test methods Colour
prEN ISO 5492:2009
measurement of surfaces
Sensory analysis Vocabulary (ISO 5492:2008)
Data Limite:
2009-05-04
Data Limite:
2009-05-26
TC 346
TC CSC01
prEN 15898:2009
prEN ISO 6465:2009
Conservation of cultural property Main general terms and
Spices Cumin (Cuminum cyminum L.) Specification
definitions concerning conservation of cultural property
(ISO/FDIS 6465:2009)
Data Limite:
2009-06-22
Data Limite:
2009-05-26
TC 350
TC CSC01
prEN 15643-1:2009
prEN ISO 6571:2009
Sustainability of Construction Works Assessment of
Spices, condiments and herbs Determination of volatile
Buildings Part 1: General Framework
oil content (hydrodistillation method)
Data Limite:
2009-06-15
(ISO 6571:2008)
Data Limite:
2009-07-26
TC 350
prEN 15643-2:2009
TC CST01
Sustainability of construction works Sustainibility
prEN ISO 14509-3:2009
Lista mensal > projectos de normas
24/70
1Junho 2009
projecto de normas
Small craft Airborne sound emitted by powered
Data Limite:
2009-06-15
recreational craft Part 3: Sound assessment using
calculation and measurement procedures
TC ECISS/TC10
(ISO/FDIS 14509-3:2009)
prEN 10225:2008
Data Limite:
2009-06-16
Weldable structural steels for fixed offshore structures
Technical delivery conditions
TC CSS02
Data Limite:
2009-05-04
prEN ISO 8536-2:2008
Infusion equipment for medical use Part 2: Closures for
TC ECISS/TC10
infusion bottles
prEN 10238:2008
(ISO/DIS 8536-2:2008)
Automatically blast-cleaned and automatically
Data Limite:
2009-05-11
prefabrication primed structural steel products
Data Limite:
2009-05-11
TC CSN21
prEN ISO 6326-1:2009
Natural gas Determination of sulfur compounds Part 1:
TC ECISS/TC12
General introduction
prEN 10029:2009
(ISO 6326-1:2007)
Hot-rolled steel plates 3 mm thick or above Tolerances
Data Limite:
2009-05-19
on dimensions and shape
Data Limite:
2009-09-23
TC CSN21
prEN ISO 12213-1:2009
TC ECISS/TC12
Natural gas Calculation of compression factor Part 1:
prEN 10051:2009
Introduction and guidelines
Hot-rolled strip and plate/sheet cut from wide strip of
(ISO 12213-1:2006)
non-alloy and alloy steels Tolerances on dimensions and
Data Limite:
2009-07-12
shape
Data Limite:
2009-09-23
TC CSN21
prEN ISO 12213-2:2009
TC ECISS/TC23
Natural gas Calculation of compression factor Part 2:
prEN ISO 10893-3:2009
Calculation using molar-composition analysis
Non-destructive testing of steel tubes Part 3: Automated
(ISO 12213-2:2006)
full peripheral flux leakage testing of seamless and
Data Limite:
2009-07-12
welded (except submerged arc-welded) ferromagnetic steel
tubes for the detection of longitudinal and/or
TC CSN21
transversal mperfections (ISO/DIS 10893-3:2009)
prEN ISO 12213-3:2009
Data Limite:
2009-07-19
Natural gas Calculation of compression factor Part 3:
Calculation using physical properties
TC ECISS/TC29
(ISO 12213-3:2006)
prEN 10344:2009
Data Limite:
2009-07-12
Malleable cast iron fittings with compression ends for
steel pipes
TC CSS99
Data Limite:
2009-06-23
prEN 15933:2009
Soil, sludge, and treated biowaste Determination of pH
TC ECISS/TC29
Data Limite:
2009-09-16
prEN ISO 10893-1:2009
Non-destructive testing of steel tubes Part 1: Automated
TC CSS99
electromagnetic testing of seamless and welded (except
prEN 15934:2009
submerged arc-welded) steel tubes for the verification of
Soil, sludge, waste, and treated biowaste Determination
hydraulic leak-tightness instead of the hydrostatic test
of dry matter Gravimetric method
(ISO/DIS 10893-1:2009)
Data Limite:
2009-09-16
Data Limite:
2009-07-19
TC CSS99
TC ECISS/TC29
prEN 15935:2009
prEN ISO 10893-2:2009
Soil, sludge, waste, and treated biowaste Determination of
Non-destructive testing of steel tubes Part 2: Automated
loss on ignition
eddy current testing of seamless and welded (except
Data Limite:
2009-09-16
submerged arc-welded) steel tubes for the detection of
imperfections (ISO/DIS 10893-2:2009)
TC CSS99
Data Limite:
2009-07-19
prEN 15936:2009
Soil, sludge, waste, and treated biowaste Determination
TC ECISS/TC29
of total organic carbon (TOC) by dry combustion
prEN ISO 10893-4:2009
Data Limite:
2009-09-16
Non-destructive testing of steel tubes Part 4: Liquid
penetrant inspection of seamless and welded steel tubes
TC CSS99
for the detection of surface imperfections (ISO/DIS
prEN 15937:2009
10893-4:2009)
Soil, sludge, and treated biowaste Determination of
Data Limite:
2009-07-19
specific electrical conductivity
Data Limite:
2009-09-16
TC ECISS/TC29
prEN ISO 10893-5:2009
TC CSH99
Non-destructive testing of steel tubes Part 5: Magnetic
prEN ISO 24444:2009
particle inspection of seamless and welded ferromagnetic
Cosmetics Sun protection test methods in vivo
steel tubes for the detection of surface imperfections
determination of SPF (Sun Protection Factor)
(ISO/DIS 10893-5:2009)
(ISO/DIS 24444:2009)
Data Limite:
2009-07-19
Lista mensal > projectos de normas
25/70
1Junho 2009
projecto de normas
TC ECISS/TC30
TC ECISS/TC29
prEN 10218-2:2009
prEN ISO 10893-6:2009
Steel wire and wire products General Part 2: Wire
Non-destructive testing of steel tubes Part 6:
dimensions and tolerances
Radiographic testing of the weld seam of welded steel
Data Limite:
2009-06-23
tubes for the detection of imperfections (ISO/DIS
10893-6:2009)
TC ECISS/TC30
Data Limite:
2009-07-19
prEN 10270-1:2009
Steel wire for mechanical springs Part 1: Patented cold
TC ECISS/TC29
drawn unalloyed spring steel wire
prEN ISO 10893-7:2009
Data Limite:
2009-06-23
Non-destructive testing of steel tubes Part 7: Digital
radiographic testing of the weld seam of welded steel
TC ECISS/TC30
tubes for the detection of imperfections (ISO/DIS
prEN 10270-2:2009
10893-7:2009)
Steel wire for mechanical springs Part 2: Oil hardened
Data Limite:
2009-07-19
and tempered spring steel wire
Data Limite:
2009-06-23
TC ECISS/TC29
prEN ISO 10893-8:2009
TC ECISS/TC30
Non-destructive testing of steel tubes Part 8: Automated
prEN 10270-3:2009
ultrasonic testing of seamless and welded steel tubes
Steel wire for mechanical springs Part 3: Stainless spring
for the detection of laminar imperfections (ISO/DIS
steel wire
10893-8:2009)
Data Limite:
2009-06-23
Data Limite:
2009-07-19
TC AECMA
TC ECISS/TC29
prEN 2606:2009
prEN ISO 10893-9:2009
Aerospace series 60° interface for adaptors, threaded,
Non-destructive testing of steel tubes Part 9: Automated
with lockring Geometric configuration
ultrasonic testing for the detection of laminar
Data Limite:
2009-05-12
imperfections in strip/plate used for the manufacture of
welded steel tubes (ISO/DIS 10893-9:2009)
TC AECMA
Data Limite:
2009-07-19
prEN 2812:2009
Aerospace series Stripping of electric cables
TC ECISS/TC29
Data Limite:
2009-05-19
prEN ISO 10893-10:2009
Non-destructive testing of steel tubes Part 10: Automated
TC AECMA
full peripheral ultrasonic testing of seamless and welded
prEN 2883:2009
(except submerged arc-welded) steel tubes for the
Aerospace series Nuts, hexagonal, self-locking, with
detection of longitudinal and/or transversal
counterbore and captive washer, in heat resisting steel,
imperfections
MoS2 lubricated Classification: 1 100 MPa (at ambient
(ISO/DIS 10893-10:2009)
temperature) / 315 °C
Data Limite:
2009-07-19
Data Limite:
2009-05-05
TC ECISS/TC29
TC AECMA
prEN ISO 10893-11:2009
prEN 3052:2009
Non-destructive testing of steel tubes Part 11: Automated
Aerospace series Bolts, normal hexagonal head, close
ultrasonic testing of weld seam of welded steel tubes for
tolerance normal shank, short thread, in heat and
the detection of longitudinal and/or transversal
corrosion resisting steel, passivated Classification: 1
imperfections (ISO/DIS 10893-11:2009)
100 MPa (at ambient temperature) / 425° C
Data Limite:
2009-07-19
Data Limite:
2009-05-12
TC ECISS/TC29
TC AECMA
prEN ISO 10893-12:2009
prEN 3226:2009
Non-destructive testing of steel tubes Part 12:
Nuts, hexagon, plain, normal height, normal across
Automated full peripheral ultrasonic thickness testing
flats, steel, cadmium plated Classification 1100 MPa/235
of seamless and welded (except submerged arc-welded)
degrees °C
steel tubes (ISO/DIS 10893-12:2009)
Data Limite:
2009-05-26
Data Limite:
2009-07-19
TC AECMA
TC ECISS/TC29
prEN 3311:2009
prEN ISO 21809-1:2009
Titanium alloy TI-P63 Annealed 900 <or= RM <or=
Petroleum and natural gas industries External coatings
1160 MPa - Bar for machining - DE <or= 150 mm
for buried or submerged pipelines used in pipeline
Data Limite:
2009-05-26
transportation systems Part 1: Polyolefin coatings
(3-layer PE and 3-layer PP)
TC AECMA
(ISO/DIS 21809-1:2009)
prEN 3360-003:2009
Data Limite:
2009-06-26
Aerospace series Cable outlet accessories for circular
and rectangular electrical and optical connectors Part
TC ECISS/TC30
003: Grommet nut, style A for EN 2997 and EN 4067 -
prEN 10218-1:2009
Product standard
Steel wire and wire products General Part 1: Test
Data Limite:
2009-05-19
methods
Data Limite:
2009-06-23
TC AECMA
prEN 3475-407:2009
Lista mensal > projectos de normas
26/70
1Junho 2009
projecto de normas
Aerospace series Cables, electrical, aircraft use - Test
standard
methods Part 407 : Flammability
Data Limite:
2009-05-26
Data Limite:
2009-05-19
TC AECMA
TC AECMA
prEN 3660-062:2009
prEN 3475-515:2009
Aerospace series Cable outlet accessories for circular and
Aerospace series Cable, electrical, aircraft use - Test
rectangular electrical and optical connectors Part 062 :
methods Part 515: Crush resistance
Cable outlet, style K, 90°, for heat shrinkable boot,
Data Limite:
2009-05-19
shielded, sealed, self locking - Product standard
Data Limite:
2009-05-19
TC AECMA
prEN 3475-812:2009
TC AECMA
Aerospace series Cables, electrical, aircraft use - Test
prEN 3660-063:2009
methods Part 812: Return loss (VSWR)
Aerospace series Cable outlet accessories for circular and
Data Limite:
2009-05-19
rectangular electrical and optical connectors Part 063 :
Cable outlet, style K, straight, for heat shrinkable boot,
TC AECMA
shielded, sealed, self locking - Product standard
prEN 3614:2009
Data Limite:
2009-05-19
Aerospace series Bolts, normal hexagonal head, relieved
shank, long thread, in heat resisting steel FE-PA2601
TC AECMA
(A286), silver plated Classification: 900 MPa / 650° C
prEN 3660-064:2009
Data Limite:
2009-05-12
Aerospace series Cable outlet accessories for circular and
rectangular electrical and optical connectors Part 064 :
TC AECMA
Cable outlet, style K, straight, for heat shrinkable boot,
prEN ISO 3660-004:2009
shielded, sealed, self locking - Product standard
Aerospace series Cable outlet accessories for circular
Data Limite:
2009-05-19
and rectangular electrical and optical connectors Part
004: Cable outlet, style A, straight, unsealed with clamp
TC AECMA
strain relief for EN 2997 and EN 4067 - Product standard
prEN 3660-065:2009
Data Limite:
2009-05-19
Aerospace series Cable outlet accessories for circular and
rectangular electrical and optical connectors Part 065 :
TC AECMA
Cable outlet, style K, 90°, for heat shrinkable boot,
prEN 3660-005:2009
shielded, sealed, self locking - Product standard
Aerospace series Cable outlet accessories for circular
Data Limite:
2009-05-19
and rectangular electrical and optical connectors Part
005: Cable outlet, style A, 90°, unsealed with clamp
TC AECMA
strain relief for EN 2997 and EN 4067 - Product standard
prEN 3733-001:2009
Data Limite:
2009-05-19
Single way circular connector for 200/280 optical fibres
with self-locking screw coupling operating Temperatures
TC AECMA
- 65 °C to 150 °C Technical specification
prEN 3660-016:2009
Data Limite:
2009-06-02
Aerospace series Cable outlet accessories for circular
and rectangular electrical and optical connectors Part
TC AECMA
016: Grommet nut, style A, self-locking and non
prEN 3745-506:2009
self-locking - Product standard
Aerospace series Fibres and cables, optical, aircraft use
Data Limite:
2009-05-26
- Test methods Part 506: Impact resistance
Data Limite:
2009-06-02
TC AECMA
prEN 3660-020:2009
TC AECMA
Aerospace series Cable outlet accessories for circular and
prEN 4072:2009
rectangular electrical and optical connectors Part 020:
Aerospace series Screws, 100° countersunk normal head,
Cable outlet, style A, straight, unsealed, self-locking
offset cruciform recess, close tolerance normal shank,
with clamp strain relief - Product andard
short thread, in titanium alloy, aluminium IVD coated
Data Limite:
2009-05-26
Classification: 1 100 MPa (at ambient temperature) /
425° C
TC AECMA
Data Limite:
2009-05-12
prEN 3660-021:2009
Aerospace series Cable outlet accessories for circular and
TC AECMA
rectangular electrical and optical connectors Part 021:
prEN 4074:2009
Cable outlet, style A, 90°, unsealed, self-locking with
Aerospace series Screws, pan head, six lobe recess,
clamp strain relief - Product standard
coarse tolerance normal shank, medium length thread, in
Data Limite:
2009-05-26
titanium alloy, aluminium IVD coated Classification: 1
100 MPa (at ambient temperature) / 425 °C
TC AECMA
Data Limite:
2009-05-05
prEN 3660-036:2009
Aerospace series Cable outlet accessories for circular and
TC AECMA
rectangular electrical and optical connectors Part 036:
prEN 4135:2009
spacer pad for cable outlet, style Z - Product standard
Aerospace series Bolts, normal bi-hexagonal head,
Data Limite:
2009-05-26
coarse tolerance normal shank, medium length thread, in
titanium alloy, anodized, MoS2 lubricated
TC AECMA
Classification: 1 100 MPa (at ambient temperature) /
prEN 3660-037:2009
315 °C
Aerospace series Cable outlet accessories for circular and
Data Limite:
2009-05-05
rectangular electrical and optical connectors Part 037:
bushing strip, elastomer, for cable outlet, style Z Product
TC AECMA
Lista mensal > projectos de normas
27/70
1Junho 2009
projecto de normas
prEN 4136:2009
°C., Type WD - Product standard
Aerospace series Bolts, normal bi-hexagonal head, coarse
Data Limite:
2009-05-19
tolerance normal shank, long thread, in alloy steel,
cadmium plated Classification: 1 100 MPa (at ambient
TC AECMA
temperature) / 235 °C
prEN 6049-003:2009
Data Limite:
2009-05-05
Aerospace series Electrical cables, installation -
Protection sleeve in meta-aramid fibres Part 003:
TC AECMA
Braided, tubular, expandable - Product standard
prEN 4137:2009
Data Limite:
2009-05-19
Aerospace series Bolts, normal bi-hexagonal head,
stepped shank, long thread, in titanium alloy, anodized,
TC AECMA
MoS2 lubricated Classification: 1 100 MPa (at ambient
prEN 9100:2009
temperature) / 315 °C
Aerospace series Quality management systems
Data Limite:
2009-05-05
Requirements (based on ISO 9001:2000) and Quality
systems - Model for quality assurance in design,
TC AECMA
development, production, installation and servicing
prEN 4604-002:2009
(based on ISO 9001:1994
Aerospace series Cable, electrical, for signal
Data Limite:
2009-06-02
transmission Part 002 : General
Data Limite:
2009-05-19
TC AECMA
prEN 4604-008:2009
Aerospace series Cable, electrical, for signal
transmission Part 008: Cable, coaxial, 50 ohms, 200
Lista mensal > projectos de normas
28/70
1Junho 2009
projecto de normas
2.2 Questionários Preliminares
Lista de documentos de referência (RD) objecto de Questionários Preliminares (PQ), com vista à
sua aceitação como normas europeias.
LISTA VAZIA
Lista mensal > projectos de normas
29/70
1Junho 2009
projecto de normas
2.3 Comités Técnicos do CEN
Lista dos Comités Técnicos do Comité Europeu de Normalização (CEN) em relação aos quais não existe ONS
(Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para
consulta no IPQ.
AECMA
CEN/TC 135
European association of aerospace manufacturers
Execution of steel structures
CEN/TC 136
CEN/TC 12
Sports, playground and other recreational equipment
Materials, equipment and offshore structures for
petroleum and natural gas industries
CEN/TC 145
Rubber and plastics machines - Safety
CEN/TC 44
Household refrigerating appliances and commercial
CEN/TC 146
refrigerated cabinets
Packaging machines - Safety
CEN/TC 50
CEN/TC 148
Lighting columns and spigots
Continuous handling equipment and systems - Safety
CEN/TC 53
Temporary works equipment
CEN/TC 149
Rail-dependent storage and retrieval equipment - Safety
CEN/TC 87
Gas fuelled smokers lighters
CEN/TC 150
Industrial trucks - Safety
CEN/TC 88
Thermal insulating materials and products
CEN/TC 151
Construction equipment and building material machines -
CEN/TC 89
Safety
Thermal performance of buildings and building
components
CEN/TC 152
Fairground and amusement park machinery and
CEN/TC 99
structures - Safety
Wallcoverings
CEN/TC 153
CEN/TC 105
Food processing machinery - Safety and hygiene
Valves and fittings to equip radiators
specifications
CEN/TC 107
CEN/TC 156
Pre-fabricated district heating pipe systems
Ventilation for buildings
CEN/TC 113
CEN/TC 163
Heat pumps and air conditioning units
Sanitary appliances
CEN/TC 123
CEN/TC 166
Lasers and laser related equipment
Chimneys
CEN/TC 125
CEN/TC 167
Masonry
Structural bearings
CEN/TC 128
CEN/TC 169
Roof covering products for discontinuous laying and
Lighting applications
products for wall cladding
CEN/TC 171
CEN/TC 130
Heat cost allocation
Space heating appliances without integral heat sources
CEN/TC 173
Lista mensal > projectos de normas
30/70
1Junho 2009
projecto de normas
Brushware
Surfaces for sport areas
CEN/TC 176
CEN/TC 219
Heat meters
Cathodic protection
CEN/TC 177
Prefabricated reinforced components of autoclaved
aerated concrete or light-weight aggregate concrete
CEN/TC 221
with open structure
Metallic shop-fabricated tanks
CEN/TC 178
CEN/TC 222
Paving units and kerbs
Feather and down as filling material for any article, as
well as finished articles filled with feather and down
CEN/TC 182
Refrigerating systems, safety and environmental
CEN/TC 225
requirements
Bar coding
CEN/TC 183
CEN/TC 226
Waste management
Road equipment
CEN/TC 186
CEN/TC 232
Industrial thermoprocessing - Safety
Compressors - Safety
CEN/TC 188
CEN/TC 239
Conveyor belts
Rescue systems
CEN/TC 189
CEN/TC 241
Geotextiles and geotextile-related products
Gypsum and gypsum based products
CEN/TC 190
CEN/TC 242
Foundry technology
Safety requirements for passenger transportation by rope
CEN/TC 193
CEN/TC 245
Adhesives
Leisure accommodation vehicles
CEN/TC 195
CEN/TC 247
Air filters for general air cleaning
Controls for mechanical building services
CEN/TC 196
CEN/TC 253
Machines for underground mines - Safety
Self adhesive tapes
CEN/TC 197
CEN/TC 256
Pumps
Railway applications
CEN/TC 198
CEN/TC 259
Printing and paper machinery - Safety
Medical alarms and signals
CEN/TC 200
CEN/TC 263
Tannery machinery - Safety
Secure storage of cash, valuables and data media
CEN/TC 201
CEN/TC 270
Leather and imitation leather goods and footwear
Internal combustion engines
manufacturing machinery - Safety
CEN/TC 271
CEN/TC 202
Surface treatment equipment - Safety
Foundry machinery
CEN/TC 273
CEN/TC 216
Logistics
Chemical disinfectants and antiseptics
CEN/TC 274
CEN/TC 217
Aircraft ground support equipment
Lista mensal > projectos de normas
31/70
1Junho 2009
projecto de normas
CEN/TC 277
CEN/TC 314
Suspended ceilings
Mastic asphalt for waterproofing
CEN/TC 278
CEN/TC 315
Road transport and traffic telematics
Spectator accomodations
CEN/TC 317
CEN/TC 279
Derivates from coal from pyrolisis
Value management - Value analysis, functional
CEN/TC 318
analysis
Hydrometry
CEN/TC 280
CEN/TC 320
Offshore containers
Transportation services
CEN/TC 283
CEN/TC 322
Precious metals - Application in jewellery and
Equipment for metal production and rolling mills - Safety
associated products
requirements
CEN/TC 288
CEN/TC 323
Execution of special geotechnical works
Raised access floors
CEN/TC 289
CEN/TC 324
Leather
Castors and wheels
CEN/TC 290
CEN/TC 325
Dimensional and geometrical product specification and
Prevention of crime by urban planning and building
verification
design (provisional)
CEN/TC 291
CEN/TC 326
Self-service shopping trolleys
Gas supply for natural gas vehicles (NGV)
CEN/TC 293
CEN/TC 328
Technical aids for disabled persons
Standard measuring system for cleaning performance
CEN/TC 296
CEN/TC 329
Tanks for transport of dangerous goods
Criteria for describing tourist services in objective tourist
information systems
CEN/TC 297
Free-standing industrial chimneys
CEN/TC 332
Laboratory equipment (provisional)
CEN/TC 301
Electrically propelled road vehicles
CEN/TC 303
Floor screeds and in-situ floorings in buildings
CEN/TC 305
Potencially explosive atmospheres - Explosion
prevention and protection
CEN/TC 309
Footwear
CEN/TC 310
Advanced manufacturing technologies
CEN/TC 313
Industrial centrifugs - Safety requirements
(provisional)
Lista mensal > projectos de normas
32/70
1Junho 2009
projecto de normas
Lista mensal > projectos de normas
33/70
1Junho 2009
projecto de normas
3. Projectos de Norma e propostas de estudo de novas Normas do Comité
Europeu de Normalização Electrotécnica (CENELEC)
Os projectos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos do CENELEC.
3.1 Projectos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
BTTF 62-3
FprEN 50110-2:2009
Operation of electrical installations Part 2: National
SR 7
annexes
FprEN 61394:2008
Data Limite:
2009-09-11
Overhead lines - Requirements for greases for
aluminium, aluminium alloy and steel bare conductors
SC 9XA
(IEC 61394:200X)
FprEN 50506-2:2009
Data Limite:
2009-05-22
Railway applications - Communication, signalling and
processing systems - Application Guide for EN 50129
SR 15
Part 2: Safety assurance
FprEN 60674-3-8:2009
Data Limite:
2009-07-03
Specification for plastic films for electrical purposes
Part 3: Specifications for individual materials Sheet 8:
SC 9XA
Requirements for balanced biaxially oriented
prEN 50159:2009
polyethylenenaphthalate (PEN) films used for electrical
Railway applications - Communication, signalling and
insulation
processing systems - Safety-related communication in
(IEC 60674-3-8:200X)
transmission systems
Data Limite:
2009-09-11
Data Limite:
2009-09-04
SR 15
SC 9XC
FprEN 60684-3-209:2008
prEN 50367:2009
Flexible insulating sleeving Part 3: Specification for
Railway applications - Current collection systems -
individual types of sleeving Sheet 209: Heat-shrinkable
Technical criteria for the interaction between pantograph
polyolefin sleeving, general purpose, flame retarded
and overhead line (to achieve free access)
(IEC 60684-3-209:200X)
Data Limite:
2009-09-04
Data Limite:
2009-05-15
SC 9XC
SR 15
prEN 50526-1:2009
FprEN 60684-3-280:2008
Railway applications - Fixed installations - D.C. surge
Flexible insulating sleeving Part 3: Specification for
arresters and voltage limiting devices Part 1: Surge
individual types of sleeving Sheet 280: Heat-shrinkable,
arresters
polyolefin sleeving, anti-tracking
Data Limite:
2009-07-24
(IEC 60684-3-280:200X)
Data Limite:
2009-05-15
SC 9XB
FprEN 61881-1:2009
SR 15
Railway applications - Rolling stock equipment -
FprEN 60684-3-281:2008
Capacitors for power electronics Part 1: Requirements,
Flexible insulating sleeving Part 3: Specification for
tests and general information
individual types of sleeving Sheet 281: Heat-shrinkable,
(IEC 61881-1:200X)
polyolefin sleeving, semi conductive
Data Limite:
2009-07-10
(IEC 60684-3-281:200X)
Data Limite:
2009-05-15
SC 205A
EN 50065-1:2001 /FprA A:2009
SR 15
Signalling on low-voltage electrical installations in
FprEN 60684-3-282:2008
the frequency range 3 kHz to 148,5 kHz Part 1: General
Flexible insulating sleeving Part 3: Specification for
requirements, frequency bands and electromagnetic
individual types of sleeving Sheet 282: Heat-shrinkable,
disturbances
polyolefin sleeving, stress control
Data Limite:
2009-09-11
(IEC 60684-3-282:200X)
Data Limite:
2009-05-15
SR 3
FprEN 61666:2009
SR 15
Industrial systems, installations and equipment and
FprEN 60684-3-283:2008
industrial products - Identification of terminals within a
Flexible insulating sleeving Part 3: Specification for
system
individual types of sleeving Sheet 283: Heat-shrinkable,
(IEC 61666:200X)
polyolefin sleeving, for bus-bar insulation
Data Limite:
2009-09-18
(IEC 60684-3-283:200X)
Lista mensal > projectos de normas
34/70
1Junho 2009
projecto de normas
Data Limite:
2009-05-15
requirements for shape dimensions, material
requirements and compatibility performance Sheet 100:
Heat-shinkable moulded shape dimensions
Data Limite:
2009-06-26
SR 15
FprEN 60684-3-116&117:2008
Flexible insulating sleeving Part 3: Specification for
SR 15
individual types of sleeving Sheets 116 and 117:
FprEN 62329-3-101:2009
Extruded polychloroprene, general purpose
Heat shrinkable moulded shapes Part 3: Specification
(IEC 60684-3-116 & 117:200X)
requirements for shape dimensions, material
Data Limite:
2009-05-15
requirements and compatibility performance Sheet 101:
Heat-shinkable moulded shapes, polyolefin, semi-rigid,
SR 15
limited fire hazard, material requirements and system
EN 60893-3-2:2004 /FprA 1:2009
performance
Insulating materials - Industrial rigid laminated sheets
Data Limite:
2009-06-26
based on thermosetting resins for electrical purposes
Part 3-2: Specifications for individual materials -
SR 15
Requirements for rigid laminated sheets based on epoxy
FprEN 62329-3-102:2009
resins
Heat shrinkable moulded shapes Part 3: Specification
(IEC 60893-3-2:2003/A1:200X)
requirements for shape dimensions, material
Data Limite:
2009-07-24
requirements and compatibility performance Sheet 102:
Heat-shinkable elastomeric moulded shapes, semi-rigid,
SR 15
material requirements and system performance
EN 60893-3-3:2004 /FprA 1:2009
Data Limite:
2009-06-26
Insulating materials - Industrial rigid laminated sheets
based on thermosetting resins for electrical purposes
SR 16
Part 3-3: Specifications for individual materials -
FprEN 60445:2009
Requirements for rigid laminated sheets based on
Basic and safety principles for man-machine interface,
melamine resins
marking and identification - Identification of equipment
(IEC 60893-3-3:2003/A1:200X)
terminals, conductor terminations and condcutors
Data Limite:
2009-06-26
(IEC 60445:200X)
Data Limite:
2009-09-04
SR 15
EN 60893-3-4:2004 /FprA 1:2009
SR 23
Insulating materials - Industrial rigid laminated sheets
FprEN 62080:2009
based on thermosetting resins for electrical purposes Part
Sound signalling devices for household and similar
3-4: Specifications for individual materials -
purposes
Requirements for rigid laminated sheets based on
(IEC 62080:2001 + A1:2008)
phenolic resins
Data Limite:
2009-07-17
(IEC 60893-3-4:2003/A1:200X)
Data Limite:
2009-06-26
SR 29
FprEN 60118-13:2009
SR 15
Electroacoustics - Hearing aids Part 13:
EN 60893-3-5:2004 /FprA 1:2009
Electromagnetic compatibility (EMC)
Insulating materials - Industrial rigid laminated sheets
(IEC 60118-13:200X)
based on thermosetting resins for electrical purposes Part
Data Limite:
2009-09-04
3-5: Specifications for individual materials -
Requirements for rigid laminated sheets based on
SR 29
polyester resins
FprEN 62489-2:2009
(IEC 60893-3-5:2003/A1:200X)
Electroacoustics - Audio-frequency induction loop
Data Limite:
2009-06-26
systems for assisted hearing Part 2: Methods of
calculating and measuring the low-frequency magnetic
SR 15
field emissions from the loop for assessing conformity
EN 60893-3-6:2004 /FprA 1:2009
with guidelines on limits for human exposure
Insulating materials - Industrial rigid laminated sheets
(IEC 62489-2:200X)
based on thermosetting resins for electrical purposes Part
Data Limite:
2009-07-10
3-6: Specifications for individual materials -
Requirements for rigid laminated sheets based on silicone
SR 32C
resins
EN 60691:2003 /FprA 2:2009
(IEC 60893-3-6:200/A1:200X)
Thermal-links - Requirements and application guide
Data Limite:
2009-06-26
(IEC 60691:2002/A2:200X)
Data Limite:
2009-07-10
SR 15
EN 60893-3-7:2004 /FprA 1:2009
SR 32B
Insulating materials - Industrial rigid laminated sheets
HD 60269-2:2007 /FprA 1:2009
based on thermosetting resins for electrical purposes
Low-voltage fuses Part 2: Supplementary requirements for
Part 3-7: Specifications for individual materials -
fuses for use by authorized persons (fuses mainly for
Requirements for rigid laminated sheets based on
industrial application) - Examples of standardized
polyimide resins
systems of fuses A to I
(IEC 60893-3-7:2003/A1:200X)
(IEC 60269-2:200/A1:200X)
Data Limite:
2009-06-26
Data Limite:
2009-08-07
SR 15
SR 32B
FprEN 62329-3-100:2009
HD 60269-3:2007 /FprA 1:2009
Heat shrinkable moulded shapes Part 3: Specification
Low-voltage fuses Part 3: Supplementary requirements for
Lista mensal > projectos de normas
35/70
1Junho 2009
projecto de normas
fuses for use by unskilled persons (fuses mainly for
household and similar applications) - Examples of
SR 48B
standardized systems of fuses A to F
FprEN 60512-7-1:2009
(IEC 60269-3:2006/A1:200X)
Connectors for electronic equipment - Tests and
Data Limite:
2009-08-14
measurements Part 7-1: Impact tests (free connectors) -
Test 7a: Free fall (repeated)
(IEC 60512-7-1:200X)
Data Limite:
2009-09-18
SR 34A
FprEN 61167:2009
SR 48B
Metal halide lamps - Performance specifications
FprEN 60512-8-1:2009
(IEC 61167:200X)
Connectors for electronic equipment - Tests and
Data Limite:
2009-08-14
measurements Part 8-1: Static load tests (fixed
connectors) - Test 8a: Static load, transverse
SR 36
(IEC 60512-8-1:200X)
FprEN 62223:2009
Data Limite:
2009-09-18
Insulators - Glossary of terms and definitions
(IEC 62223:200X)
SR 48B
Data Limite:
2009-05-15
FprEN 60512-9-1:2009
Connectors for electronic equipment - Tests and
SR 42
measurements Part 9-1: Endurance tests - Test 9a:
FprEN 60060-2:2009
Mechanical operation
High-voltage test techniques Part 2: Measuring Systems -
(IEC 60512-9-1:200X)
" Proposed horizontal standard "
Data Limite:
2009-09-18
(IEC 60060-2:200X)
Data Limite:
2009-09-18
SR 48B
FprEN 60512-9-5:2009
SR 42
Connectors for electronic equipment - Tests and
FprEN 62475:2009
measurements Part 9-5: Endurance tests - Test 9e:
High-current test techniques: Definitions and
Current loading, cyclic
requirements for test currents and measuring systems -
(IEC 60512-9-5:200X)
"Proposed Horizontal Standard"
Data Limite:
2009-09-18
(IEC 62475:200X)
Data Limite:
2009-08-14
SR 48B
FprEN 60512-17-1:2009
SR 46F
Connectors for electronic equipment - Tests and
FprEN 62562:2009
measurements Part 17-1: Cable clamping tests - Test
Cavity resonator method to measure the complex
17a: Cable clamp robustness
permittivity of low-loss dielectric plates
(IEC 60512-17-1:200X)
(IEC 62562:200X)
Data Limite:
2009-09-18
Data Limite:
2009-06-19
SR 48B
SR 47D
FprEN 60512-17-3:2009
FprEN 60191-6:2009
Connectors for electronic equipment -Tests and
Mechanical standardization of semiconductor devices
measurements Part 17-3: Cable clamping tests - Test 17c:
Part 6 : General rules for the preparation of outline
Cable clamp resistance to cable pull (tensile)
drawings of surface mounted semiconductor device
(IEC 60512-17-3:200X)
packages
Data Limite:
2009-09-18
(IEC 60191-6:200X)
Data Limite:
2009-07-10
SR 48B
FprEN 60512-17-4:2009
SR 47
Connectors for electronic equipment - Tests and
FprEN 60749-15:2009
measurements Part 17-4: Cable clamping tests - Test 17d:
Semiconductor devices - Mechanical and climatic test
Cable clamp resistance to cable torsion
methods Part 15: Resistance to soldering temperature
(IEC 60512-17-4:200X)
for through-hole mounted devices
Data Limite:
2009-09-18
(IEC 60749-15:200X)
Data Limite:
2009-09-25
SR 48B
FprEN 60512-19-1:2009
SR 47
Connectors for electronic equipment - Tests and
FprEN 62418:2009
measurements Part 19-1: Chemical resistance tests - Test
Semiconductor devices - Metallization stress void test
19a: Fluid resistance of pre-insulated crimp barrels
(IEC 62418:200X)
(IEC 60512-19-1:200X)
Data Limite:
2009-07-17
Data Limite:
2009-09-18
SR 48D
SR 48B
FprEN 60297-3-106:2009
FprEN 60512-20-1:2009
Mechanical structures for electronic equipment -
Connectors for electronic equipment -Tests and
Dimensions of mechanical structures of the 482,6 mm (19
measurements Part 20-1: Fire hazard tests - Test 20a:
in) series Part 3-106: Adaptation dimensions for
Flammability, needle-flame
subracks and chassis applicable with metric cabinets or
(IEC 60512-20-1:200X)
racks in accordance with IEC 60917-2-1
Data Limite:
2009-09-18
(IEC 60297-3-106: 200X)
Data Limite:
2009-07-10
SR 48B
Lista mensal > projectos de normas
36/70
1Junho 2009
projecto de normas
FprEN 60512-20-3:2009
FprEN 60603-7-5:2009
Connectors for electronic equipment - Tests and
Connectors for electronic equipment Part 7-5: Details
measurements Part 20-3: Fire hazard tests - Test 20c:
pecification for 8-way, shielded, free and fixed
Flammability, glow-wire
connectors, for data transmissions with frequencies up
(IEC 60512-20-3:200X)
to 250 MHz
Data Limite:
2009-09-18
(IEC 60603-7-5:200X)
Data Limite:
2009-08-14
SR 48B
FprEN 60512-21-1:2009
SR 48B
Connectors for electronic equipment - Tests and
FprEN 60603-7-7:2009
measurements Part 21-1: R.F. resistance tests - Test 21a:
Connectors for electronic equipment Part 7-7: Detail
R.F. shunt resistance
specification for 8-way, shielded, free and fixed
(IEC 60512-21-1:200X)
connectors for data transmission with frequencies up to
Data Limite:
2009-09-18
600 MHz
(IEC 60603-7-7:200X)
SR 48B
Data Limite:
2009-08-14
FprEN 60512-22-1:2009
Connectors for electronic equipment - Tests and
SR 48B
measurements Part 22-1: Capacitance tests - Test 22a:
FprEN 60603-7-41:2008
Capacitance
Connectors for electronic equipment Part 7-41: Detail
(IEC 60512-22-1:200X)
specification for 8-way, un-shielded, free and fixed
Data Limite:
2009-09-18
connectors, for data transmissions with frequencies up
to 500 MHz
SR 48B
(IEC 60603-7-41:200X)
FprEN 60512-23-2:2009
Data Limite:
2009-05-15
Connectors for electronic equipment - Tests and
measurements Part 23-2: Screening and filtering tests -
SR 48B
Test 23b: Suppression characteristics of integral filters
FprEN 60603-7-51:2008
(IEC 60512-23-2:200X)
Connectors for electronic equipment Part 7-51: Detail
Data Limite:
2009-09-18
specification for 8-way, shielded, free and fixed
connectors, for data transmissions with frequencies up
SR 48B
to 500 MHz
FprEN 60512-24-1:2009
(IEC 60603-7-51:200X)
Connectors for electronic equipment - Tests and
Data Limite:
2009-05-15
measurements Part 24-1: Magnetic interference tests -
Test 24a: Residual magnetism
SR 48B
(IEC 60512-24-1:200X)
FprEN 60603-7-71:2009
Data Limite:
2009-09-18
Connectors for electronic equipment
Part 7-71: Detail specification for 8-way, shielded,
SR 48B
free and fixed connectors, for data transmission with
FprEN 60603-7-1:2009
frequencies up to 1000 MHz
Connectors for electronic equipment Part 7-1: Detail
(IEC 60603-7-71:200X)
specification for 8-way, shielded free and fixed
Data Limite:
2009-06-19
connectors
(IEC 60603-7-1:200X)
SR 48D
Data Limite:
2009-05-01
FprEN 60917-2-4:2009
Modular order for the development of mechanical
SR 48B
structures for electronic equipment practices Part 2-4:
FprEN 60603-7-2:2009
Sectional specification - Interface co-ordination
Connectors for electronic equipment Part 7-2: Detail
dimensions for the 25 mm equipment practice -
specification for 8-way, unshielded, free and fixed
Adaptation dimensions for subracks or chassis
connectors, for data transmission with frequencies up
applicable in cabinets or racks in accordance with IEC
to 100 MHz
60297-3-100 (19 in)
(IEC 60603-7-2:200X)
(IEC 60917-2-4:200X)
Data Limite:
2009-08-14
Data Limite:
2009-07-10
SR 48B
SR 48B
FprEN 60603-7-3:2009
FprEN 61076-2-107:2009
Connectors for electronic equipment Part 7-3: Detail
Connectors for electronic equipment - Product
specification for 8-way, shielded , free and fixed
requirements Part 2-107:Detail specification for circular
connectors, for data transmission with frequencies up
hybrid connectors M12 with electrical and fibre-optic
to 100 MHz
contacts with screw locking
(IEC 60603-7-3:200X)
(IEC 61076-2-107:200X)
Data Limite:
2009-08-14
Data Limite:
2009-08-07
SR 48B
SR 48B
FprEN 60603-7-4:2009
FprEN 61076-3-115:2009
Connectors for electronic equipment Part 7-4: Detail
Connectors for electronic equipment - Product
specification for 8-way, unshielded, free and fixed
requirements Part 3-115: Rectangular connectors - Detail
connectors, for data transmissions with frequencies up
specification for protective housings for use with 8-way
to 250 MHz
shielded and unshielded connectors for frequencies up to
(IEC 60603-7-4:200X)
600 MHz for industrial environments incorporating the
Data Limite:
2009-08-14
IEC 60603-7 series interface - Variant 12 related to IEC
61076-3-106 - Push-pull type
SR 48B
(IEC 61076-3-115:200X)
Lista mensal > projectos de normas
37/70
1Junho 2009
projecto de normas
(IEC 61076-3-115:200X)
Data Limite:
2009-05-22
SR 65B
FprEN 60534-2-1:2009
SR 48B
Industrial-process control valves Part 2-1: Flow capacity
FprEN 61076-3-118:2009
- Sizing equations for fluid flow under installed
Connectors for electronic equipment - Product
conditions
requirements Part 3-118: Rectangular connectors: Detail
(IEC 60534-2-1:200X)
specification for a 4 pole + PE power connector with
Data Limite:
2009-09-04
push-pull coupling
(IEC 61076-3-118:200X)
SR 65B
Data Limite:
2009-10-02
FprEN 60534-7:2009
Industrial-process control valves Part 7: Control valve
SR 49
data sheet
FprEN 60444-11:2009
(IEC 60534-7:200X)
Measurement of quartz cystal unit parameters Part 11:
Data Limite:
2009-07-31
Standard method for the determination of the load
resonance frequency (fL) and the effective load
capacitance (CLeff) using automatic network analyzer
techniques and error correction
SR 65B
(IEC 60444-11:200X)
FprEN 60534-8-2:2009
Data Limite:
2009-08-14
Industrial-process control valves Part 8-2: Noise
considerations - Laboratory measurement of noise
SR 51
generated by hydrodynamic flow through control valves
FprEN 62317-2:2009
(IEC 60534-8-2:200X)
Ferrite cores - Dimensions Part 2: Pot-cores for use in
Data Limite:
2009-09-25
telecommunications, power supply, and filter
applications
SR 65B
(IEC 62317-2:200X)
FprEN 60534-8-3:2009
Data Limite:
2009-09-18
Industrial-process control valves Part 8-3: Noise
considerations - Control valve aerodynamic noise
SR 51
prediction method
FprEN 62333-3:2008
(IEC 60534-8-3:200X)
Noise suppression sheet for digital devices and equipment
Data Limite:
2009-08-07
Part 3: Characterization of parameters of noise
suppression sheet
SR 65B
(IEC 62333-3:200X)
FprEN 61003-2:2008
Data Limite:
2009-05-01
Industrial-process control systems - Instruments with
analogue inputs and two- or multi-state outputs Part 2:
SR 56
Guidance for inspection and routine testing
FprEN 60300-3-11:2009
(IEC 61003-2:200X)
Dependability management Part 3-11: Application guide
Data Limite:
2009-05-15
- Reliability centred maintenance
(IEC 60300-3-11:200X)
SR 65
Data Limite:
2009-05-15
FprEN 62443-2-1:2009
Industrial communication networks - Network and system
SR 56
security Part 2 1: Establishing an industrial automation
FprEN 60300-3-15:2009
and control system security program
Dependability management Part 3-15: Application guide
(IEC 62443-2-1:200X)
- Engineering of system dependability
Data Limite:
2009-10-02
(IEC 60300-3-15:200X)
Data Limite:
2009-05-29
SR 65E
FprEN 62453-1:2009
SR 56
Field device tool (FDT) interface specification Part 1:
FprEN 62508:2009
Overview and guidance
Guidance on human aspects of dependability
(IEC 62453-1:200X)
(IEC 62508:200X)
Data Limite:
2009-05-29
Data Limite:
2009-08-14
SR 65E
SR 57
FprEN 62453-2:2009
FprEN 61850-8-1:2009
Field device tool (FDT) interface specification Part 2:
Communication networks and systems for power utility
Concepts and detailed description
automation Part 8-1: Specific Communication Service
(IEC 62453-2:200X)
Mapping (SCSM) - Mappings to MMS (ISO 9506-1 and
Data Limite:
2009-05-29
ISO 9506-2) and to ISO/IEC 8802-3
(IEC 61850-8-1:200X)
SR 65E
Data Limite:
2009-09-04
FprEN 62453-301:2009
Field device tool (FDT) interface specification Part
SR 57
301: Communication profile integration - IEC 61784
FprEN 61850-9-2:2009
CPF 1
Communication networks and systems for power utility
(IEC 62453-301:200X)
automation Part 9-2: Specific Communication Service
Data Limite:
2009-05-29
Mapping (SCSM) - Sampled values over ISO/IEC
8802-3
SR 65E
(IEC 61850-9-2:200X)
FprEN 62453-302:2009
Data Limite:
2009-09-11
Field device tool (FDT) interface specification Part
Lista mensal > projectos de normas
38/70
1Junho 2009
projecto de normas
302: Communication profile integration - IEC 61784
Data Limite:
2009-07-24
CPF 2
(IEC 62453-302:200X)
SR 80
Data Limite:
2009-05-29
FprEN 62616:2009
Maritime navigation and radiocommunication equipment
SR 65E
and systems - Bridge navigational watch alarm system
FprEN 62453-303-1:2009
(BNWAS) - Performance requirements, methods of testing
Field device tool (FDT) nterface specification Part
and required test results
303-1: Communication profile integration - IEC 61784
(IEC 62616:200X)
CP 3/1 and CP 3/2
Data Limite:
2009-06-19
(IEC 62453-303-1:200X)
Data Limite:
2009-05-29
SR 86C
FprEN 61280-2-1:2009
SR 65E
Fibre optic communication subsystem basic test
FprEN 62453-303-2:2009
procedures Part 2-1: Test procedures for digital systems
Field device tool (FDT) interface specification Part
- Receiver sensitivity and overload measurement
303-2: Communication profile integration - IEC 61784
(IEC 61280-2-1:200X)
CP 3/4, CP 3/5 and CP 3/6
Data Limite:
2009-08-14
(IEC 62453-303-2:200X)
Data Limite:
2009-05-29
SR 86C
FprEN 61280-2-3:2009
SR 65E
Fibre optic communication subsystem basic test
FprEN 62453-306:2009
procedures Part 2-3: Digital systems - Jitter and wander
Field device tool (FDT) interface specification Part
measurements
306: Communication profile integration - IEC 61784
(IEC 61280-2-3:200X)
CPF6
Data Limite:
2009-06-26
(IEC 62453-306:200X)
Data Limite:
2009-05-29
SR 86C
FprEN 61280-4-1:2009
SR 65E
Fibre optic communication subsystem test procedures
FprEN 62453-309:2009
Part 4-1: Installed cable plant - Multimode attenuation
Field device tool (FDT) interface specification Part
measurement
309: Communication profile integration - IEC 61784
(IEC 61280-4-1:200X)
CPF 9
Data Limite:
2009-05-15
(IEC 62453-309:200X)
Data Limite:
2009-05-29
SR 86
FprEN 61746-1:2008
SR 65E
Calibration of Optical Time-Domain Reflectometers
FprEN 62453-315:2009
(OTDR) Part 1: OTDR for single-mode fibres
Field device tool (FDT)terface specification Part 315:
(IEC 61746-1:200X)
Communication profile integration - IEC 61784 CPF 15
Data Limite:
2009-05-01
(IEC 62453-315:200X)
Data Limite:
2009-05-29
SR 86B
FprEN 61978-1:2008
SR 66
Fibre optic passive chromatic dispersion compensators
FprEN 61010-1:2009
Part 1: Generic specification
Safety requirements for electrical equipment for
(IEC 61978-1:200X)
measurement, control, and laboratory use Part 1: General
Data Limite:
2009-05-15
requirements
(IEC 61010-1:200X)
SR 86C
Data Limite:
2009-06-19
FprEN 62148-11:2009
Fibre optic active components and devices - Package and
SR 66
interface standards Part 11: 14-pin active device
FprEN 61010-2-030:2009
modules
Safety requirements for electrical equipment for
(IEC 62148-11:200X)
measurement, control, and laboratory use Part 2-030:
Data Limite:
2009-06-12
Particular requirements for testing and measuring
circuits
SR 86C
(IEC 61010-2-030:200X)
FprEN 62148-16:2009
Data Limite:
2009-06-19
Fibre optic active components and devices - Package and
interface standards Part 16: Transmitter and receiver
SR 69
components for use with the LC connector interface
FprEN 61851-1:2009
(IEC 62148-16:200X)
Electric vehicle conductive charging system Part 1:
Data Limite:
2009-06-26
General requirements
(IEC 61851-1:200X)
SR 86C
Data Limite:
2009-08-14
FprEN 62150-4:2009
Fibre optic active components and devices - Basic test
SR 80
and measurement procedures Part 4: Relative intensity
FprEN 61097-14:2009
noise using a time-domain optical detection system
Global maritime distress and safety system (GMDSS)
(IEC 62150-4:200X)
Part 14: AIS Search And Rescue Transmitter (AIS-SART) -
Data Limite:
2009-06-19
Operational and performance requirements, methods of
testing and required test results
SR 86C
(IEC 61097-14:200X)
FprEN 62343-5-1:2009
Lista mensal > projectos de normas
39/70
1Junho 2009
projecto de normas
Dynamic modules - Test methods Part 5-1: Dynamic gain
soldering applications
tilt equalizer - Response time measurement
(IEC 61190-1-3:2007/A1:200X)
(IEC 62343-5-1:200X)
Data Limite:
2009-07-10
Data Limite:
2009-06-12
SR 91
SR 86
FprEN 61193-3:2009
FprEN 62496-3-1:2008
Quality assessment systems Part 3: Selection and use of
Optical circuit boards - Performance standard Part 3-1:
sampling plans forprinted board and laminate
Flexible optical circuit boards using unconnectorized
end-product and in-process auditing
optical glass fibres
(IEC 61193-3:200X)
(IEC 62496-3-1:200X)
Data Limite:
2009-08-07
Data Limite:
2009-05-15
SR 91
SR 89
FprEN 61249-2-41:2009
FprEN 60695-1-11:2009
Materials for printed boards and other interconnecting
Fire hazard testing Part 11: Guidance for assessing the
structures Part 2-41: Reinforced base materials clad and
fire hazard of electrotechnical products - Fire hazard
unclad - Brominated Epoxide cellulose paper/woven
assessment
E-glass reinforced laminate sheets of defined flammability
(IEC 60695-1-11:200X)
(vertical burning test), copper-clad for lead-free
Data Limite:
2009-09-11
assembly
(IEC 61249-2-41:200X)
SR 89
Data Limite:
2009-08-07
FprEN 60695-2-12:2009
Fire hazard testing Part 2-12: Glowing/hot-wire based
SR 91
test methods - Glow-wire flammability index (GWFI) test
FprEN 61249-2-42:2009
method gfor materials
Materials for printed boards and other interconnecting
(IEC 60695-2-12:200X)
structures Part 2-42: Reinforced base materials clad and
Data Limite:
2009-09-04
unclad - Brominated Epoxide non-woven /woven E-glass
reinforced laminate sheets of defined flammability
SR 89
(vertical burning test), copper-clad for lead-free
FprEN 60695-2-13:2009
assembly
Fire hazard testing Part -2-13: Glowing/hot-wire based
(IEC 61249-2-42:200X)
test methods - Glow-wire ignition temperature (GWIT)
Data Limite:
2009-08-07
test method for materials
(IEC 60695-2-13:200X)
SR 91
Data Limite:
2009-09-04
FprEN 61249-4-14:2009
Materials for printed boards and other interconnecting
SR 89
structures Part 4-14: Sectional specification set for
EN 60695-6-1:2005 /FprA 1:2009
prepreg materials, unclad (for the manufacture of
Fire hazard testing Part 6-1:Smoke obscuration -
multilayer boards) - Epoxide woven E-glass prepreg of
General guidance
defined flammability (vertical burning test) for lead-free
(IEC 60695-6-1:2005/A1:200X)
assembly
Data Limite:
2009-08-14
(IEC 61249-4-14:200X)
Data Limite:
2009-05-01
SR 90
FprEN 61788-8:2009
SR 91
Superconductivity Part 8: AC loss measurements - Total
FprEN 61249-4-15:2009
AC loss measurement of round superconducting wires
Materials for printed boards and other interconnecting
exposed to a transverse alternating magnetic field at
structures Part 4-15: Sectional specification set for
liquid helium temperature by a pickup coil method
prepreg materials, unclad (for the manufacture of
(IEC 61788-8:200X)
multilayer boards) - Multifunctional epoxide woven
Data Limite:
2009-06-26
E-glass prepreg of defined flammability (vertical burning
test) for lead-free assembly
SR 90
(IEC 61249-4-15:200X)
FprEN 61788-14:2009
Data Limite:
2009-05-01
Superconductivity Part 14: Superconducting power devices
- General requirements for characteristic tests of
SR 91
current leads designed for powering superconducting
FprEN 61249-4-16:2009
devices
Materials for printed boards and other interconnecting
(IEC 61788-14:200X)
structures Part 4-16: Sectional specification set for
Data Limite:
2009-08-14
prepreg materials, unclad (for the manufacture of
multilayer boards) - Multifunctional non-halogenated
SR 91
epoxide woven E-glass prepreg of defined flammability
FprEN 61188-7:2009
(vertical burning test) for lead-free assembly
Printed boards and printed board assemblies - Design and
(IEC 61249-4-16:200X)
use Part 7: Electronic component zero orientation for
Data Limite:
2009-05-01
CAD library construction
(IEC 61188-7:200X)
SR 91
Data Limite:
2009-05-01
FprEN 61249-4-17:2009
Materials for printed boards and other interconnecting
SR 91
structures Part 4-17: Sectional specification set for
EN 61190-1-3:2007 /FprA 1:2009
prepreg materials, unclad (for the manufacture of
Attachment materials for electronic assembly Part 1-3:
multilayer boards) - Non-halogenated epoxide woven
Requirements for electronic grade solder alloys and
E-glass prepreg of defined flammability (vertical burning
fluxed and non-fluxed solid solders for electronic
test) for lead-free assembly
Lista mensal > projectos de normas
40/70
1Junho 2009
projecto de normas
(IEC 61249-4-17:200X)
Recording - Helical-scan digital video cassette
Data Limite:
2009-05-01
recording system using 6,35 mm magnetic tape for
consumer use (525-60, 625-50, 1125-60 and 1125-50
SR 91
systems) Part 4: Pack header table and contents
FprEN 61760-3:2009
(IEC 61834-4:1998/A1:200X)
Surface mounting technology Part 3: Standard method for
Data Limite:
2009-09-25
the specification of components for through hole reflow
(THR) soldering
SR 100
(IEC 61760-3:200X)
FprEN 61937-11:2008
Data Limite:
2009-08-07
Digital audio - Interface for non-linear PCM encoded
audio bitstreams applying IEC 60958 Part 11: MPEG-4
SR 96
AAC and its extensions in LATM/LOAS
FprEN 61558-2-8:2009
(IEC 61937-11:200X)
Safety of transformers, reactors, power supply units and
Data Limite:
2009-05-08
similar products for supply voltages up to 1 100 V Part
2-8: Particular requirements and tests for bell and chime
SR 100
transformers
FprEN 62455:2009
(IEC 61558-2-8:200X)
Internet protocol (IP) and transport stream (TS) based
Data Limite:
2009-07-17
service access
(IEC 62455:200X)
SR 96
Data Limite:
2009-09-25
FprEN 61558-2-16:2009
Safety of transformers, reactors, power supply units and
SR 100
similar products for voltages up to 1100 V Part 2-16:
FprEN 62458:2008
Particular requirements and tests for switch mode power
Sound system equipment - Electroacoustic transducers -
supply units and transformers for switch mode power
Measurement of large signal parameters
supply units
(IEC 62458:200X)
(IEC 61558-2-16:200X)
Data Limite:
2009-05-22
Data Limite:
2009-05-22
SR 96
SR 100
FprEN 62041:2009
FprEN 62459:2008
Safety of transformers, reactors, power supply units and
Sound system equipment - Electroacoustic transducers -
similar products for supply voltages up to 1 100 V -
Measurement of suspension parts
EMC requirements
(IEC 62459:200X)
(IEC 62041:200X)
Data Limite:
2009-05-22
Data Limite:
2009-09-11
SR 100
SR 100
FprEN 62571:2009
FprEN 60268-4:2009
Digital audiobook file format and player requirements
Sound system equipment Part 4: Microphones
(IEC 62571:200X)
(IEC 60268-4:200X)
Data Limite:
2009-09-11
Data Limite:
2009-09-25
SR 101
SR 100
FprEN 61340-5-3:2009
FprEN 60461:2009
Electrostatics Part 5-3: Protection of electronic devices
Time and control code
from electrostatic phenomena - Properties and
(IEC 60461:200X)
requirements classifications for packaging intended for
Data Limite:
2009-07-17
electrostatic discharge sensitive devices
(IEC 61340-5-3:200X)
SR 100
Data Limite:
2009-07-03
EN 60958-3:2006 /FprA 1:2009
Digital audio interface
SR 109
Part 3: Consumer applications
EN 60664-3:2003 /FprA 1:2009
(IEC 60958-3:2006/A1:200X)
Insulation coordination for equipment within low-voltage
Data Limite:
2009-07-03
systems Part 3: Use of coating, potting or moulding for
protection against pollution
SR 100
(IEC 60664-3:2003/A1:200X)
FprEN 61606-1:2009
Data Limite:
2009-08-14
Audio and audiovisual equipment - Digital audio parts -
Basic measurement methods of audio characteristics Part
SR 112
1: General
EN 60112:2003 /FprA 1:2009
(IEC 61606-1:200X)
Method for the determination of the proof and the
Data Limite:
2009-06-26
comparative tracking indices of solid insulating
materials
SR 100
(IEC 60112:2003/A1:200X)
FprEN 61606-2:2009
Data Limite:
2009-06-26
Audio and audiovisual equipment - Digital audio parts -
Basic measurement methods of audio characteristics
TC 2
Part 2: Consumer use
FprEN 60034-1:2008
(IEC 60606-2:200X)
Rotating electrical machines Part 1: Rating and
Data Limite:
2009-06-26
performance
(IEC 60034-1:200X)
SR 100
Data Limite:
2009-05-22
EN 61834-4:1998 /FprA 1:2009
Lista mensal > projectos de normas
41/70
1Junho 2009
projecto de normas
TC 2
Data Limite:
2009-06-26
FprEN 60034-18-1:2008
Rotating electrical machines Part 18-1: Functional
TC 20
evaluation of insulation systems - General guidelines
FprEN 60332-3-23:2009
(IEC 60034-18-1:200X)
Tests on electric and optical fibre cables under fire
Data Limite:
2009-05-15
conditions Part 3-23: Test for vertical flame spread of
vertically-mounted bunched wires or cables - Category B
TC 8X
(IEC 60332-3-23:2000 + A1:2008)
FprEN 50160:2009
Data Limite:
2009-06-26
Voltage characteristics of electricity supplied by public
distribution snetworks
TC 20
Data Limite:
2009-05-15
FprEN 60332-3-24:2009
Tests on electric and optical fibre cables under fire
TC 8X
conditions Part 3-24: Test for vertical flame spread of
EN 60059:1999 /FprA 1:2009
vertically-mounted bunched wires or cables - Category C
IEC standard current ratings
(IEC 60332-3-24:2000 + A1:2008)
(IEC 60059:1999/A1:200X)
Data Limite:
2009-06-26
Data Limite:
2009-05-22
TC 20
TC 8X
FprEN 60332-3-25:2009
FprEN 60196:2009
Tests on electric and optical fibre cables under fire
IEC standard frequencies
conditions Part 3-25: Test for vertical flame spread of
(IEC 60196:200X)
vertically-mounted bunched wires or cables - Category D
Data Limite:
2009-05-22
(IEC 60332-3-25:2000 + A1:2008)
Data Limite:
2009-06-26
TC 9X
FprEN 62267:2009
TC 20
Railway applications - Automated urban guided
FprHD 620-S2:2009
transport (AUGT) - Safety requirements
Distribution cables with extruded insulation for rated
(IEC 62267:200X)
voltages from 3,6/6 (7,2) kV up and including 20,8/36
Data Limite:
2009-06-05
(42) kV
Data Limite:
2009-09-04
TC 13
FprEN 62059-32-1:2008
Electricity metering equipment - Dependability Part 32-1:
Durability - Testing of the stability of metrological
TC 22X
characteristics by applying elevated temperature
FprEN 60146-1-1:2009
(IEC 62059-32-1:200X)
Semiconductor converters - General requirements and
Data Limite:
2009-05-08
line commutated converters Part 1-1: Specification of
basic requirements
TC 17AC
(IEC 60146-1-1:200X)
FprTR 62271-303:2009
Data Limite:
2009-06-05
High-voltage switchgear and controlgear Part 303: Use
and handling of sulphur hexafluoride (SF6)
TC 22X
(IEC/TR 62271-303:2008)
FprEN 61975:2009
Data Limite:
2009-06-19
System tests for high-voltage direct current (HVDC)
installations
TC 17AC
(IEC 61975:200X)
prEN 50532:2009
Data Limite:
2009-09-04
Compact Equipment Assembly for Distribution
Substations (CEADS)
TC 22X
Data Limite:
2009-06-26
EN 62040-3:2001 /FprA A:2009
Uninterruptible power systems (UPS) Part 3: Method of
TC 20
specifying the performance and test requirements
FprEN 60332-3-10:2009
Data Limite:
2009-07-17
Tests on electric and optical fibre cables under fire
conditions Part 3-10: Test for vertical flame spread of
TC 22X
vertically-mounted bunched wires or cables - Apparatus
FprEN 62501:2009
(IEC 60332-3-10:2000 + A1:2008)
Voltage sourced converter (VSC) valves for high-voltage
Data Limite:
2009-06-26
direct voltage (HVDC) power transmission - Electrical
testing
TC 20
(IEC 62501:200X)
FprEN 60332-3-21:2009
Data Limite:
2009-05-29
Tests on electric cables under fire conditions Part 3-21:
Test for vertical flame spread of vertically-mounted
TC 23BX
bunched wires or cables - Category A F/R
FprEN 60669-1:2009
(IEC 60332-3-21:2000)
Switches for household and similar fixed-electrical
Data Limite:
2009-06-26
installations Part 1: General requirements
(IEC 60669-1:200X)
TC 20
Data Limite:
2009-07-24
FprEN 60332-3-22:2009
Tests on electric and optical fibre cables under fire
TC 23BX
conditions Part 3-22: Test for vertical flame spread of
EN 60669-2-1:2004 /FprA A:2009
vertically-mounted bunched wires or cables - Category A
Switches for household and similar fixed electrical
(IEC 60332-3-22:2000 + A1:2008)
installations Part 2-1: Particular requirements -
Lista mensal > projectos de normas
42/70
1Junho 2009
projecto de normas
Electronic switches
(IEC 61347-2-2:200X)
Data Limite:
2009-07-24
Data Limite:
2009-05-22
TC 26A
TC 34Z
FprEN 60974-11:2008
FprEN 61547:2009
Arc welding equipment Part 11: Electrode holders
Equipment for general lighting purposes - EMC
(IEC 60974-11:200X)
immunity requirements
Data Limite:
2009-05-22
(IEC 61547:200X)
Data Limite:
2009-05-29
TC 31
FprEN 60079-13:2009
TC 34Z
Explosive atmospheres Part 13: Equipment protected by
EN 62384:2006 /FprA 1:2008
pressurized rooms "p"
DC or AC supplied electronic control gear for LED
(IEC 60079-13:200X)
modules - Performance requirements
Data Limite:
2009-07-24
(IEC 62384:2006/A1:200X)
Data Limite:
2009-05-15
TC 34Z
EN 60061-1:1993 /FprA 42:2009
TC 34Z
Lamp caps and holders together with gauges for the
FprEN 62386-202:2009
control of interchangeability and safety Part 1: Lamp
Digital addressable lighting interface Part 202:
caps
Particular requirements for control gears -
(IEC 60061-1:1969/A42:200X)
Self-contained emergency lighting (device type 1)
Data Limite:
2009-05-08
(IEC 62386-202:200X)
Data Limite:
2009-05-15
TC 34Z
EN 60061-1:1993 /FprA 43:2009
TC 34Z
Lamp caps and holders together with gauges for the
FprEN 62386-209:2009
control of interchangeability and safety Part 1: Lamp
Digital addressable lighting interface Part 209:
caps
Particular requirements for control gear - Colour control
(IEC 60061-1:1969/A43:200X)
(Device Type 8)
Data Limite:
2009-07-03
(IEC 62386-209:200X)
Data Limite:
2009-09-18
TC 34Z
EN 60061-2:1993 /FprA 39:2009
TC 40XA
Lamp caps and holders together with gauges for the
FprEN 60384-26:2009
control of interchangeability and safety Part 2:
Fixed capacitors for use in electronic equipment Part 26:
Lampholders
Sectional specification - Aluminium electrolytic
(IEC 60061-2:1969/A39:200X)
capacitors with conductive polymer solid electrolyte
Data Limite:
2009-05-08
(IEC 60384-26:200X)
Data Limite:
2009-09-25
TC 34Z
EN 60061-2:1993 /FprA 40:2009
TC 40XA
Lamp caps and holders together with gauges for the
FprEN 60384-26-1:2009
control of interchangeability and safety Part 2:
Fixed capacitors for use in electronic equipment Part
Lampholders
26-1: Blank detail specification - Aluminum electrolytic
(IEC 60061-2:1969/A40:200X)
capacitors with conductive polymer solid electrolyte -
Data Limite:
2009-07-03
Assessment level EZ
(IEC 60384-26-1:200X)
TC 34Z
Data Limite:
2009-09-25
EN 60061-3:1993 /FprA 40:2009
Lamp caps and holders together with gauges for the
TC 45AX
control of interchangeability and safety Part 3 Gauges
prEN 60709:2009
(IEC 60061-3:1969/A40:200X)
Nuclear power plants - Instrumentation and control
Data Limite:
2009-05-08
systems important to safety - Separation
(IEC 60709:2004)
TC 34Z
Data Limite:
2009-07-24
EN 60061-3:1993 /FprA 41:2009
Lamp caps and holders together with gauges for the
TC 45AX
control of interchangeability and safety Part 3 Gauges
FprEN 60880:2009
(IEC 60061-3:1969/A41:200X)
Nuclear power plants - Instrumentation and control
Data Limite:
2009-07-03
systems important to safety - Software aspects for
computer-based systems performing category A
TC 34Z
functions
EN 60061-4:1992 /FprA 12:2009
(IEC 60880:2006)
Lamp caps and holders together with gauges for the
Data Limite:
2009-05-29
control of interchangeability and safety Part 4:
Guidelines and general information
TC 45AX
(IEC 60061-4:1990/A12:200X)
prEN 60964:2009
Data Limite:
2009-05-08
Nuclear power plants - Control rooms - Design
(IEC 60964:2009)
TC 34Z
Data Limite:
2009-07-24
FprEN 61347-2-2:2008
Lamp controlgear Part 2-2: Particular requirements for
TC 45AX
d.c. or a.c. supplied electronic step-down convertors for
FprEN 60987:2009
filament lamps
Nuclear power plants - Instrumentation and control
Lista mensal > projectos de normas
43/70
1Junho 2009
projecto de normas
important to safety - Hardware design requirements for
Specifications for particular types of winding wires Part
computer-based systems
17: Polyvinyl acetal enamelled rectangular copper wire,
(IEC 60987:2007, modif)
class 105
Data Limite:
2009-05-15
(IEC 60317-17:200X)
Data Limite:
2009-07-24
TC 45AX
FprEN 62138:2009
TC 55
Nuclear power plants - Instrumentation and control for
EN 60317-18:2004 /FprA 1:2009
systems important to safety - Software aspects for
Specifications for particular types of winding wires Part
computer-based systems performing category B or C
18: Polyvinyl acetal enamelled rectangular copper wire,
functions
class 120
(IEC 62138:2004)
(IEC 60317-18:2004/A1:200X)
Data Limite:
2009-05-29
Data Limite:
2009-07-24
TC 45AX
TC 55
prEN 62340:2009
EN 60317-22:2004 /FprA 1:2009
Nuclear power plants - Instrumentation and control
Specifications for particular types of winding wires
systems important to safety - Requirements for coping
Part 22: Polyester or polyesterimide enamelled round
with common cause failure (CCF)
copper wire overcoated with polyamide, class 180
(IEC 62340:2007)
(IEC 60317-22:2004/A1:200X)
Data Limite:
2009-07-24
Data Limite:
2009-07-24
TC 45B
TC 55
prEN 62363:2009
FprEN 60317-25:2009
Radiation protection instrumentation - Portable photon
Specifications for particular types of winding wires
contamination meters and monitors
Part 25: Polyester or polyesterimide overcoated with
(IEC 62363:2008)
polyamide-imide enamelled round aluminium wire, class
Data Limite:
2009-06-19
200
(IEC 60317-25:200X)
TC 46X
Data Limite:
2009-07-24
FprEN 61935-1:2009
Specification for the testing of balanced and coaxial
TC 55
information technology cabling Part 1: Installed
EN 60317-26:1996 /FprA 2:2009
balanced cabling as specification in ISO/IEC 11801 and
Specifications for particular types of winding wires
related standards
Part 26: Polyamide-imide enamelled round copper wire,
(IEC 61935-1:200X)
class 200
Data Limite:
2009-06-26
(IEC 60317-26:1990/A2:200X)
Data Limite:
2009-07-24
TC 55
TC 55
EN 60317-29:1996 /FprA 2:2009
FprEN 60317-8:2009
Specifications for particular types of winding wires
Specifications for particular types of winding wires Part
Part 29: Polyester or polyesterimide overcoated with
8: Polyesterimide enamelled round copper wire, class
polyamide-imide enamelled rectangular copper wire,
180
class 200
(IEC 60317-8:200X)
(IEC 60317-29:1990/A2:200X)
Data Limite:
2009-07-24
Data Limite:
2009-07-24
TC 55
TC 55
FprEN 60317-12:2009
EN 60317-42:1997 /FprA 1:2009
Specifications for particular types of winding wires Part
Specifications for particular types of winding wires
12 : Polyvinyl acetal enamelled round copper wire, class
Part 42: Polyester-amide-imide enamelled round copper
120
wire, class 200
(IEC 60317-12:200X)
(IEC 60317-42:1997/A1:200X)
Data Limite:
2009-07-24
Data Limite:
2009-07-24
TC 55
TC 55
FprEN 60317-13:2009
EN 60317-43:1997 /FprA 1:2009
Specifications for particular types of winding wires
Specifications for particular types of winding wires
Part 13: Polyester or polyesterimide overcoated with
Part 43: Aromatic polyimide tape wrapped round copper
polyamide-imide enamelled round copper wire, class
wire, class 240
200
(IEC 60317-43:1997/A1:200X)
(IEC 60317-13:200X)
Data Limite:
2009-07-24
Data Limite:
2009-07-24
TC 55
TC 55
EN 60317-44:1997 /FprA 1:2009
EN 60317-15:2004 /FprA 1:2009
Specifications for particular types of winding wires
Specifications for particular types of winding wires
Part 44: Aromatic polyimide tape wrapped rectangular
Part 15: Polyesterimide enamelled round aluminium
copper wire, class 240
wire, class 180
(IEC 60317-44:1997/A1:200X)
(IEC 60317-15:2004/A1:200X)
Data Limite:
2009-07-24
Data Limite:
2009-07-24
TC 55
TC 55
EN 60851-1:1996 /FprA 2:2008
FprEN 60317-17:2009
Winding wires - Test methods Part 1: General
Lista mensal > projectos de normas
44/70
1Junho 2009
projecto de normas
(IEC 60851-1:1996/A2:200X)
EN 60335-2-79:2004 /FprA C:2008
Data Limite:
2009-05-22
Household an similar electrical appliances - Safety Part
2-79: Particular requirements for high pressure cleaners
TC 55
and steam cleaners
FprEN 60851-2:2008
Data Limite:
2009-05-08
Winding wires - Test methods Part 2: Determination of
dimensions
TC 61
(IEC 60851-2:200X)
FprEN 60335-2-109:2009
Data Limite:
2009-05-22
Household and similar electrical appliances - Safety Part
2-109: Particular requirements for UV radiation water
TC 59X
treatment appliances
EN 60311:2003 /FprA 2:2009
(IEC 60335-2-109:200X)
Electric irons for household or similar use - Methods
Data Limite:
2009-08-14
for measuring performance
(IEC 60311:2002/prA2:200X)
TC 61
Data Limite:
2009-06-05
EN 62115:2005 /FprA ISA:2009
Electric toys - Safety *Interpretation of Clause 18 of
TC 59X
EN 62115:2005*
FprEN 60705:2009
Household microwave ovens - Methods for measuring
Data Limite:
2009-09-04
performance
(IEC 60705:200X)
TC 62
Data Limite:
2009-08-14
FprEN 60601-1-6:2009
Medical electrical equipment Part 1-6: General
TC 61
requirements for basic safety and essential performance -
prEN 50417:2009
Collateral standard: Usability
Safety of household and similar electrical appliances -
(IEC 60601-1-6:200X)
Interpretations related to European Standards in the EN
Data Limite:
2009-09-25
60335 series
Data Limite:
2009-06-05
TC 62
FprEN 60601-1-11:2009
TC 61
Medical electrical equipment Part 1-11: General
EN 50366:2003 /FprA ISA:2009
requirements for basic safety and essential performance
Household and similar electrical appliances -
- Collateral standard: Requirements for medical
Electromagnetic fields - Methods for evaluation and
electrical equipment and medical electrical systems
measurement * Interpretation of Clause 1 of EN
used in the home healthcare environment
50366:2003 & A1:2006*
(IEC 60601-1-11:200X)
Data Limite:
2009-09-04
Data Limite:
2009-09-04
TC 61
TC 62
EN 60335-2-4:2008 /FprA A:2009
FprEN 60601-2-4:2009
Household and similar electrical appliances - Safety Part
Medical electrical equipment Part 2-4: Particular
2-4: Particular requirements for spin extractors
requirements for basic safety and essential performance of
Data Limite:
2009-06-12
cardiac defibrillators
(IEC 60601-2-4:200X)
TC 61
Data Limite:
2009-07-03
EN 60335-2-7:2008 /FprA A:2009
Household and similar electrical appliances - Safety
TC 62
Part 2-7: Particular requirements for washing machines
FprEN 60601-2-23:2009
Data Limite:
2009-06-12
Medical electrical equipment Part 2-23: Particular
requirements for basic safety and essential performance
TC 61
of transcutaneous partial pressure monitoring equipment
EN 60335-2-67:2003 /FprAB B:2008
(IEC 60601-2-23:200X)
Household and similar electrical appliances - Safety Part
Data Limite:
2009-07-24
2-67: Particular requirements for floor treatment and
floor cleaning machines, for industrial and commercial
TC 62
use
FprEN 60601-2-25:2009
Data Limite:
2009-05-08
Medical electrical equipment Part 2-25: Particular
requirements for basic safety and essential performance
TC 61
of electrocardiographs
EN 60335-2-68:2003 /FprAB B:2008
(IEC 60601-2-25:200X)
Household and similar electrical appliances - Safety Part
Data Limite:
2009-07-24
2-68: Particular requirements for spray extraction
appliances, for industrial and commercial use
TC 62
Data Limite:
2009-05-08
FprEN 60601-2-26:2009
Medical electrical equipment Part 2-26: Particular
TC 61
requirements for basic safety and essential performance
EN 60335-2-69:2003 /FprAB C:2008
of electroencephalographs
Household and similar electrical appliances - Safety
(IEC 60601-2-26:200X)
Part 2-69: Particular requirements for wet and dry
Data Limite:
2009-09-25
vacuum cleaners, including power brush, for industrial
and commercial use
TC 62
Data Limite:
2009-05-08
FprEN 60601-2-27:2009
Medical electrical equipment
TC 61
Part 2-27: Particular requirements for basic safety and
Lista mensal > projectos de normas
45/70
1Junho 2009
projecto de normas
essential performance of electrocardiographic
FprHD 60364-5-551:2009
monitoring equipment
Eelectrical installations of buildings Part 5-55:
(IEC 60601-2-27:200X)
Selection and erection of electrical equipment - Other
Data Limite:
2009-06-19
equipment Clause 551 - Low-voltage generating sets
(IEC 60364-5-55:2001/A2:2008 (CLAUSE 551))
TC 62
Data Limite:
2009-07-10
FprEN 60601-2-34:2009
Medical electrical equipment Part 2-34: Particular
TC 64
requirements for basic safety and essential performance
FprHD 60364-7-702:2009
of invasive blood pressure monitoring equipment
Low-voltage electrical installations Part 7-702:
(IEC 60601-2-34:200X)
Requirements for special installations or locations -
Data Limite:
2009-07-24
Swimming pools and fountains
(IEC 60364-7-702:200X)
TC 62
Data Limite:
2009-09-04
FprEN 60601-2-46:2009
Medical electrical equipment Part 2-46: Particular
TC 64
requirements for basic safety and essential performance
FprHD 60364-7-717:2009
of operating tables
Low-voltage electrical installations Part 7-717:
(IEC 60601-2-46:200X)
Requirements for special installations or locations -
Data Limite:
2009-06-19
Mobile or transportable units
(IEC 60364-7-717:200X)
TC 62
Data Limite:
2009-06-12
FprEN 60601-2-47:2009
Medical electrical equipment Part 2-47: Particular
TC 64
requirements for the basic safety and essential
HD 60364-7-717:2009 /FprA A:2009
performance of ambulatory electrocardiographic systems
Low-voltage electrical installations Part 7-717:
(IEC 60601-2-47:200X)
Requirements for special installations or locations -
Data Limite:
2009-09-04
Mobile or transportable units
Data Limite:
2009-06-12
TC 62
FprEN 60601-2-49:2009
TC 65CX
Medical electrical equipment Part 2-49: Particular
prEN 50325-5:2008
requirements for basic safety and essential performance
Industrial communications subsystem based on ISO 11898
of multifunction patient monitoring equipment
(CAN) for controller-device interfaces Part 5:
(IEC 60601-2-49:200X)
Functional safety communication based on EN 50325-4
Data Limite:
2009-07-24
Data Limite:
2009-05-15
TC 62
TC 65CX
FprEN 60601-2-54:2009
FprEN 61784-3:2009
Medical electrical equipment Part 2-54: Particular
Industrial communication networks - Profiles
requirements for basic safety and essential performance
Part 3: Functional safety fieldbuses
of X-ray equipment for radiography and radioscopy
(IEC 61784-3:200X)
(IEC 60601-2-54:200X)
Data Limite:
2009-06-19
Data Limite:
2009-05-29
TC 65CX
TC 62
FprEN 61784-5:2009
FprEN 62467-1:2009
Industrial communication networks - Profiles Part 5:
Medical electrical equipment - Dosimetric instruments as
Installation of fieldbuses
used in brachytherapy Part 1: Instruments based on
(IEC 61784-5:200X)
well-type ionization chambers
Data Limite:
2009-10-02
(IEC 62467-1:200X)
Data Limite:
2009-05-15
TC 65CX
EN 61804-3:2007 /FprA 1:2009
TC 62
Function blocks (FB) for process control Part 3:
FprEN 62563-1:2009
Electronic Device Description Language (EDDL)
Medical electrical equipment - Medical image display
(IEC 61804-3:2006/A1:200X)
systems Part 1: Evaluation methods
Data Limite:
2009-09-04
(IEC 62563-1:200X)
Data Limite:
2009-09-25
TC 76
FprEN 60601-2-57:2009
TC 64
Medical electrical equipment Part 2-57: Particular
FprHD 60364-4-42:2009
requirements for basic safety and essential performance
Low voltage electrical installations Part 4-42: Protection
of non-laser light source equipment intended for
for safety - Protection against thermal effects
therapeutic, diagnostic, monitoring and
(IEC 60364-4-42:200X)
cosmetic/aesthetic use
Data Limite:
2009-07-24
(IEC 60601-2-57:200X)
Data Limite:
2009-09-11
TC 64
FprHD 60364-5-56:2009
TC 78
Low-voltage electrical installations Part 5-56: Selection
FprEN 60832-1:2008
and erection of electrical equipment - Safety services
Live working - Insulating sticks and attachable devices
(IEC 60364-5-56:200X)
Part 1: Insulating sticks
Data Limite:
2009-06-26
(IEC 60832-1:200X)
Data Limite:
2009-05-01
TC 64
Lista mensal > projectos de normas
46/70
1Junho 2009
projecto de normas
TC 78
optical fibre communication systems - Product
FprEN 60832-2:2008
specifications
Live working - Isulating sticks and attachable devices
Part 8-13 Type LSH-PC simplex terminated on IEC
Part 2: Attachable devices
60793-2-50 category B1.1 and B1.3 single mode fibre
(IEC 60832-2:200X)
with titanium composite ferrule for Category U
Data Limite:
2009-05-01
Data Limite:
2009-05-15
TC 78
TC 86BXA
FprEN 61482-1-1:2009
FprEN 50411-2-9:2009
Live working - Protective clothing against the thermal
Fibre organisers and closures to be used in optical fibre
nazards of an electric arc Part 1-1: Test methods -
communications systems - Product specifications Part 2-9:
Method 1 - Determination of the arc rating (ATPV or
Non-sealed closures for air blown optical fibre
EBT50) of flame resistant materials for clothing
microduct cable, for category S & A
(IEC 61482-1-1:200X)
Data Limite:
2009-06-26
Data Limite:
2009-05-01
TC 86BXA
TC 79
prEN 50411-3-2:2009
FprEN 50132-1:2009
Fibre organisers and closures to be used in optical fibre
Alarm systems - CCTV surveillance systems for use in
communications systems - Product specifications Part
security applications Part 1: System requirements
3-2: Singlemode mechanical fibre splice
Data Limite:
2009-05-22
Data Limite:
2009-06-12
TC 82
TC 86BXA
FprEN 50530:2008
FprEN 61202-1:2009
Overallefficiency of photovoltaic inverters
Fibre optic interconnecting devices and passive
Data Limite:
2009-05-15
components - Fibre optic isolators Part 1: Generic
specification
TC 82
(IEC 61202-1:200X)
FprEN 60891:2008
Data Limite:
2009-06-05
Procedures for temperature and irradiance corrections to
measured I-V characteristics of photovoltaic devices
TC 86BXA
(IEC 60891:200X)
FprEN 61300-2-9:2009
Data Limite:
2009-05-01
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures
TC 82
Part 2-9: Tests - Shock
FprEN 62509:2009
(IEC 61300-2-9:200X)
Performance and functioning of photovoltaic battery
Data Limite:
2009-09-11
charge controllers
(IEC 62509:200X)
TC 86BXA
FprEN 61300-2-21:2009
Data Limite:
2009-06-26
Fibre optic interconnecting devices and passive
components - Basic test and measurement procedures Part
TC 86BXA
2-21: Tests - Composite temperature-humidity cyclic test
prEN 50377-8-10:2008
(IEC 61300-2-21:200X)
Connector sets and interconnect components to be used in
Data Limite:
2009-06-19
optical fibre communication systems - Product
specifications
TC 86BXA
Part 8-10: Type LSH-APC simplex terminated on IEC
FprEN 61300-3-22:2008
60793-2-50 category B1.1 and B1.3 single mode fibre
Fibre optic interconnecting devices and passive
with titanium composite ferrule for Category C
components - Basic test and measurement procedures
Data Limite:
2009-05-15
Part 3-22: Examinations and measurements - Ferrule
compression force
TC 86BXA
(IEC 61300-3-22:200X)
prEN 50377-8-11:2008
Data Limite:
2009-05-15
Connector sets and interconnect components to be used in
optical fibre communication systems - Product
TC 86BXA
specifications
FprEN 61753-121-2:2009
Part 8-11: Type LSH-PC simplex terminated on IEC
Fibre optic interconnecting devices and passive
60793-2-50 category B1.1 and B1.3 single mode fibre
components performance standards Part 121-2: Simplex
with titanium composite ferrule for Category C
and duplex cords with singlemode fibre and cylindrical
Data Limite:
2009-05-15
ferrule connectors for Category C - controlled
environment
TC 86BXA
(IEC 61753-121-2:200X)
prEN 50377-8-12:2008
Data Limite:
2009-08-07
Connector sets and interconnect components to be used in
optical fibre communication systems - Product
TC 86BXA
specifications
FprEN 61753-121-3:2009
Part 8-12: Type LSH-APC simplex terminated on IEC
Fibre optic interconnecting devices and passive
60793-2-50 category B1.1 and B1.3 single mode fibre
components performance standards Part 121-3: Simplex
with titanium composite ferrule for Category U
and duplex cords with singlemode fibre and cylindrical
Data Limite:
2009-05-15
ferrule connectors for Category U - uncontrolled
environment
TC 86BXA
(IEC 61753-121-3:200X)
prEN 50377-8-13:2008
Data Limite:
2009-08-07
Connector sets and interconnect components to be used in
Lista mensal > projectos de normas
47/70
1Junho 2009
projecto de normas
TC 86BXA
requirements
FprEN 61754-15:2009
(IEC 60065:2001/A2:200X)
Fibre optic interconnecting devices and passive
Data Limite:
2009-07-31
components - Fibre optic connector interfaces Part 15:
Type LSH connector family
TC 108X
(IEC 61754-15:200X)
EN 60065:2002 /FprAB B:2009
Data Limite:
2009-05-22
Audio, video and similar electronic apparatus - Safety
requirements
TC 86BXA
Data Limite:
2009-07-31
FprEN 61754-24-11:2009
Fibre optic interconnecting devices and passive
TC 116
components - Fibre optic connector interfaces Part
EN 60745-2-1:2003 /FprA E:2009
24-11: Interface standard for SC-RJ connectors with
Hand-held motor-operated electric tools - Safety Part 2-1:
protective housings based on IEC 61076-3-117
Particular requirements for drills and impact drills
(IEC 61754-24-11:200X)
Data Limite:
2009-09-18
Data Limite:
2009-05-22
TC 116
TC 86BXA
EN 60745-2-2:2003 /FprA D:2009
FprEN 61754-24-21:2009
Hand-held motor-operated electric tools - Safety Part
Fibre optic interconnecting devices and passive
2-2: Particular requirements for screwdrivers and
components - Fibre optic connector interfaces Part
impact wrenches
24-21: Interface standard for SC-RJ connectors with
Data Limite:
2009-09-18
protective housings based on IEC 61076-3-106, variant
06
TC 116
(IEC 61754-24-21:200X)
EN 60745-2-3:2007 /FprA 1:2009
Data Limite:
2009-05-22
Hand-held motor-operated electric tools - Safety Part 2-3:
Particular requirements for grinders, polishers and
TC 86BXA
disk-type sanders
FprEN 62074-1:2009
(IEC 60745-2-3:2006/A1:200X)
Fibre optic interconnecting devices and passive
Data Limite:
2009-08-14
components - Fibre optic WDM devices Part 1: Generic
specification
TC 116
(IEC 62074-1:200X)
EN 60745-2-3:2007 /FprA C:2009
Data Limite:
2009-06-26
Hand-held motor-operated electric tools - Safety Part 2-3:
Particular requirements for grinders, polishers and
TC 86BXA
disk-type sanders
FprEN 62134-1:2009
Data Limite:
2009-09-18
Fibre optic interconnecting devices and passive
components - Fibre optic closures Part 1: Generic
TC 116
specification
EN 60745-2-6:2003 /FprA D:2009
(IEC 62134-1:200X)
Hand-held motor-operated electric tools - Safety Part
Data Limite:
2009-06-12
2-6: Particular requirements for hammers
Data Limite:
2009-09-18
TC 88
EN 61400-1:2005 /FprEN 1:2009
TC 116
Wind turbines
EN 60745-2-11:2003 /FprA D:2009
Part 1: Design requirements
Hand-held motor-operated electric tools - Safety Part
(IEC 61400-1:2005/A1:200X)
2-11: Particular requirements for reciprocating saws (jig
Data Limite:
2009-06-19
and sabre saws)
Data Limite:
2009-09-18
TC 88
FprEN 61400-24:2009
TC 116
Wind turbines Part 24: Lightning protection
EN 60745-2-14:2003 /FprA 2:2009
(IEC 61400-24:200X)
Hand-held motor-operated electric tools - Safety Part
Data Limite:
2009-07-24
2-14: Particular requirements for planers
(IEC 60745-2-14:2003/A2:200X)
TC 97
Data Limite:
2009-07-24
FprEN 61822:2009
Electrical installations for lighting and beaconing of
TC 116
aerodromes - Constant current regulators
EN 60745-2-19:2005 /FprA 1:2009
(IEC 61822:200X)
Hand-held motor-operated electric tools - Safety Part
Data Limite:
2009-05-08
2-19: Particular requirements for jointers
(IEC 60745-2-19:2005/A1:2005)
TC 106X
Data Limite:
2009-07-24
FprEN 50364:2009
Limitation of human exposure to electromagnetic fields
TC 205
from devices operating in the frequency range 0 Hz to 10
FprEN 50491-5-1:2009
GHz, used in Electronic Article Surveillance (EAS),
General requirements for Home and Building Electronic
Radio Frequency Identification (RFID) and similar
Systems (HBES) and Building Automation and Control
applications
Systems (BACS) Part 5-1: EMC requirements, conditions
Data Limite:
2009-09-04
and test set-up
Data Limite:
2009-06-12
TC 108X
EN 60065:2002 /FprA 2:2009
TC 205
Audio, video and similar electronic apparatus - Safety
FprEN 50491-5-2:2009
Lista mensal > projectos de normas
48/70
1Junho 2009
projecto de normas
General requirements for Home and Building Electronic
FprEN 55013:2009
Systems (HBES) and Building Automation and Control
Sound and television broadcast receivers and associated
Systems (BACS) Part 5-2: EMC requirements for
equipment - Radio disturbance characteristics - Limits
HBES/BACS used in residential, commercial and light
and methods of measurement
industry environment
(CISPR 13:200X)
Data Limite:
2009-06-12
Data Limite:
2009-05-29
TC 205
TC 210
FprEN 50491-5-3:2009
EN 55020:2007 /prA ISA:2008
General requirements for Home and Building
Sound and television broadcast receivers and associated
Electronic Systems (HBES) and Building Automation
equipment - Immunity characteristics - Limits and
and Control Systems (BACS) Part 5-3: EMC
methods of measurement
requirements for HBES/BACS used in industry
Data Limite:
2009-05-08
environment
Data Limite:
2009-06-12
TC 210
FprEN 55024:2009
TC 206
Information technology equipment - Immunity
FprEN 62087:2009
characteristics - Limits and methods of measurement
Methods of measurement for the power consumption of
(CISPR 24: 200X)
audio, video and related equipment
Data Limite:
2009-07-31
(IEC 62087:2008)
Data Limite:
2009-07-10
TC 210
EN 61000-4-4:2004 /FprA 1:2009
TC 206
Electromagnetic compatibility (EMC) Part 4-4: Testing
FprEN 62514:2009
and measurement techniques - Electrical fast
Guidelines for multimedia gateway in home networks
transient/burst immunity test
(IEC 62514:200X)
(IEC 61000-4-4:2004/A1:200X)
Data Limite:
2009-08-14
Data Limite:
2009-09-04
TC 209
TC 210
FprEN 60728-1-2:2009
FprEN 61000-4-15:2009
Cable networks for television signals, sound signals and
Electromagnetic compatibility (EMC) Part 4-15 : Testing
interactive services Part 1-2: Performance requirements
and measurement techniques - Flickermeter - Functional
for signals delivered at the system outlet in operation
and design specifications
(IEC 60728-1-2:200X)
(IEC 61000-4-15:200X)
Data Limite:
2009-05-29
Data Limite:
2009-09-04
TC 209
TC 210
FprEN 60728-11:2008
EN 61000-4-16:1998 /FprA 2:2009
Cable networks for television signals, sound signals and
Electromagnetic compatibility (EMC) Part 4-16: Testing
interactive services Part 11: Safety
and measurement techniques - Test for immunity to
(IEC 60728-11:200X)
conducted, common mode disturbances in the frequency
Data Limite:
2009-05-08
range 0 Hz to 150 kHz
(IEC 61000-4-16:1998/A2:200X)
TC 210
Data Limite:
2009-06-26
prTR 50485:2009
Electromagnetic compatibility - Emission measurements
TC 210
in fully anechoic chambers
FprEN 61000-4-20:2008
Data Limite:
2009-07-24
Electromagnetic compatibility (EMC) Part 4-20:
Testing and measurement techniques - Emission and
TC 210
immunity testing in Transverse Electromagnetic (TEM)
FprEN 55011:2009
waveguides - Basic EMC Publication
Industrial, scientific and medical equipment -
(IEC 61000-4-20:200X)
Radio-frequency disturbance characteristics - Limits
Data Limite:
2009-05-01
and methods of measurement
(CISPR 11:200X)
TC 210
Data Limite:
2009-05-01
FprEN 61000-4-20:2008
Electromagnetic compatibility (EMC) Part 4-20:
Testing and measurement techniques - Emission and
immunity testing in Transverse Electromagnetic (TEM)
TC 210
waveguides - Basic EMC Publication
EN 55011:2009 /FprA A:2009
(IEC 61000-4-20:200X (fragment 1) )
Industrial, scientific and medical equipment -
Data Limite:
2009-05-01
Radio-frequency disturbance characteristics - Limits
and methods of measurement
TC 213
Data Limite:
2009-05-01
FprEN 62275:2009
Cable management systems - Cable ties for electrical
TC 210
installations
EN 55013:2001 /prA ISA:2008
(IEC 62275:2006, modif)
Sound and television broadcast receivers and associated
Data Limite:
2009-05-08
equipment - Radio disturbance characteristics - Limits
and methods of measurement
TC 215
Data Limite:
2009-05-08
EN 50173-1:2007 /FprA A:2009
Information technology - Generic cabling systems Part
TC 210
1: General requirements
Lista mensal > projectos de normas
49/70
1Junho 2009
projecto de normas
Data Limite:
2009-06-19
Lista mensal > projectos de normas
50/70
1Junho 2009
projecto de normas
3.2 Propostas de Anulação de Normas do Comité Europeu de Normalização Electrotécnica
(CENELEC)
As propostas de anulação de normas estão organizadas por Comités Técnicos do CENELEC.
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
LISTA VAZIA
Lista mensal > projectos de normas
51/70
1Junho 2009
projecto de normas
3.3 Propostas de estudo de novas Normas - "Vilamoura Procedures"
Lista de propostas de estudo baseadas em novas normas ou em revisão de normas apresentadas por organismos
nacionais membros do CENELEC, com vista à possível elaboração de normas europeias
LISTA VAZIA
Lista mensal > projectos de normas
52/70
1Junho 2009
projecto de normas
3.4 Questionários Preliminares
Lista dos Documentos de Referência (RD) objecto de Questionários Preliminares (PQ), com vista à sua aceitação como
normas europeias.
LISTA VAZIA
Lista mensal > projectos de normas
53/70
1Junho 2009
projecto de normas
4. Projectos de Normas e Propostas de Estudo de Novas Normas do Comité
Europeu de Normalização (CEN) / Comité Europeu de Normalização
Electrotécnica (CENELEC)
4.1 Projectos em Inquérito Público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
LISTA VAZIA
Lista mensal > projectos de normas
54/70
1Junho 2009
projecto de normas
5. Projectos de Norma do Instituto Europeu de Normalização para as
Telecomunicações (ETSI)
5.1 Projectos em Inquérito Público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
TC ETSI
prEN 300330-2:2009 V1.4.1
prEN 300065-2:2009 V1.2.1
Electromagnetic compatibility and Radio spectrum
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Radio
Matters (ERM); Narrow-band direct-printing telegraph
equipment in the frequency range 9 kHz to 25 MHz and
equipment for receiving meteorological or navigational
inductive loop systems in the frequency range 9 kHz to
information (NAVTEX) Part 2: Harmonized EN covering
30 MHz Part 2: Harmonized EN covering the essential
the essential requirements of article 3.2 of the R&TTE
requirements of article 3.2 of the R&TTE Directive
directive
Data Limite:
2009-07-13
Data Limite:
2009-05-14
TC ETSI
TC ETSI
prEN 300753:2009 V1.2.1
prEN 300065-3:2009 V1.2.1
Equipment Engineering (EE); Acoustic noise emitted by
Electromagnetic compatibility and Radio spectrum
telecommunications equipment
Matters (ERM); Narrow-band direct-printing telegraph
Data Limite:
2009-07-01
equipment for receiving meteorological or navigational
information (NAVTEX) Part 3: Harmonized EN covering
TC ETSI
the essential requirements of article 3.3 (e) of the R&TTE
prEN 301406:2009 V2.1.0
directive
Digital Enhanced Cordless Telecommunications (DECT);
Data Limite:
2009-05-14
Harmonized EN for Digital Enhanced Cordless
Telecommunications (DECT) covering the essential
TC ETSI
requirements under article 3.2 of the R&TTE Directive;
prEN 300176-1:2009 V2.1.0
Generic radio
Digital Enhanced Cordless Telecommunications (DECT);
Data Limite:
2009-07-01
Test specification Part 1: Radio
Data Limite:
2009-07-01
TC ETSI
prEN 301790:2009 V1.5.1
TC ETSI
Digital Video Broadcasting (DVB); Interaction channel for
prEN 300220-1:2009 V2.3.1
satellite distribution systems
Electromagnetic compatibility and Radio spectrum
Data Limite:
2009-05-11
Matters (ERM); Short Range Devices (SRD); Radio
equipment to be used in the 25 MHz to 1 000 MHz
TC ETSI
frequency range with power levels ranging up to 500 mW
prEN 301839-1:2009 V1.3.1
Part 1: Technical characteristics and test methods
Electromagnetic compatibility and Radio spectrum
Data Limite:
2009-07-30
Matters (ERM); Short Range Devices (SRD); Ultra Low
Power Active Medical Implants (ULP-AMI) and
TC ETSI
Peripherals (ULP-AMI-P) operating in the frequency
prEN 300220-2:2009 V2.3.1
range 402 MHz to 405 MHz Part 1: Technical
Electromagnetic compatibility and Radio spectrum
characteristics and test methods
Matters (ERM); Short Range Devices (SRD); Radio
Data Limite:
2009-05-06
equipment to be used in the 25 MHz to 1 000 MHz
frequency range with power levels ranging up to 500 mW
TC ETSI
Part 2: Harmonized EN covering essential requirements
prEN 301839-2:2009 V1.3.1
under article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum
Data Limite:
2009-07-30
Matters (ERM); Short Range Devices (SRD); Ultra Low
Power Active Medical Implants (ULP-AMI) and
TC ETSI
Peripherals (ULP-AMI-P) operating in the frequency
prEN 300330-1:2009 V1.6.2
range 402 MHz to 405 MHz Part 2: Harmonized EN
Electromagnetic compatibility and Radio spectrum
covering essential requirements of article 3.2 of the
Matters (ERM);Short Range Devices (SRD);Radio
R&TTE Directive
equipment in the frequency range 9 kHz to 25 MHz and
Data Limite:
2009-05-06
inductive loop systems in the frequency range 9 kHz to
30 MHz Part 1: Technical characteristics and test
TC ETSI
methods
prEN 301908-10:2009 V4.1.0
Data Limite:
2009-07-13
Electromagnetic compatibility and Radio spectrum
Matters (ERM);Base Stations (BS), Repeaters and User
TC ETSI
Equipment (UE) for IMT-2000 Third-Generation
Lista mensal > projectos de normas
55/70
1Junho 2009
projecto de normas
cellular networks Part 10: Harmonized EN for
IMT-2000, FDMA/TDMA (DECT) covering essential
requirements of article 3.2 of the R&TTE Directive
Data Limite:
2009-07-03
TC ETSI
prEN 302264-1:2009 V1.1.1
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices; Road Transport
and Traffic Telematics (RTTT); Short Range Radar
equipment operating in the 77 GHz to 81 GHz band Part
1: Technical requirements and methods of measurement
Data Limite:
2009-06-16
TC ETSI
prEN 302264-2:2009 V1.1.1
Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices; Road Transport and
Traffic Telematics (RTTT); Short Range Radar equipment
operating in the 77 GHz to 81 GHz band Part 2:
Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive
Data Limite:
2009-06-16
TC ETSI
prEN 302307:2009 V1.2.1
Digital Video Broadcasting (DVB); Second generation
framing structure, channel coding and modulation
systems for Broadcasting, Interactive Services, News
Gathering and other broadband satellite applications
(DVB-S2)
Data Limite:
2009-08-24
TC ETSI
prEN 302684-1:2009 V1.0.0
Electromagnetic compatibility and Radio spectrum
Matters (ERM); EMC network standards Part 1:
Wire-line telecommunications networks using
telephone wires [Endorsed CENELEC pr50521-1: 2008]
Data Limite:
2009-06-25
TC ETSI
prEN 302684-2:2009 V1.0.0
Electromagnetic compatibility and Radio spectrum
Matters (ERM); EMC network standards Part 2:
Wire-line telecommunications networks using coaxial
cables [Endorsed CENELEC pr50521-2: 2008]
Data Limite:
2009-06-25
TC ETSI
prEN 302684-3:2009 V1.0.0
Electromagnetic compatibility and Radio spectrum
Matters (ERM); EMC network standards Part 3:
Wire-line telecommunications networks using power
lines [Endorsed CENELEC pr50521-3: 2008]
Data Limite:
2009-06-25
Lista mensal > projectos de normas
56/70
1Junho 2009
projecto de normas
5.2 Propostas de Anulação de Normas
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
LISTA VAZIA
Lista mensal > projectos de normas
57/70
1Junho 2009
projecto de normas
6. Projectos de Norma e propostas de estudo de novas Normas da Organização
Internacional de Normalização (ISO)
Os projectos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos da ISO.
6.1 Projectos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
TC 43
ISO 9612:2009 ( Ed 1 )
Acoustics Determination of occupational noise exposure
Engineering method
TC 67
ISO 23936-1:2009 ( Ed 1 )
Petroleum, petrochemical and natural gas industries Nonmetallic
materials in contact with media related to oil and gas production
Part 1: Thermoplastics
TC 72
ISO 9902-1:2001 /A 1:2009 ( Ed 1 )
Textile machinery Noise test cod
Part 1: Common requirements
AMENDMENT 1
TC 72
ISO 9902-2:2001 /A 1:2009 ( Ed 1 )
Textile machinery Noise test cod
Part 2: Spinning preparatory and spinning machinery
AMENDMENT 1
TC 72
ISO 9902-3:2001 /A 1:2009 ( Ed 1 )
Textile machinery Noise test cod
Part 3: Nonwoven machinery
AMENDMENT 1
TC 72
ISO 9902-4:2001 /A 1:2009 ( Ed 1 )
Textile machinery Noise test cod
Part 4: Yarn processing, cordage and rope manufacturing
machinery
AMENDMENT 1
TC 72
ISO 9902-5:2001 /A 1:2009 ( Ed 1 )
Textile machinery Noise test cod Part 5: Weaving and knitting
preparatory machinery
AMENDMENT 1
TC 72
ISO 9902-6:2001 /A 1:2009 ( Ed 1 )
Textile machinery Noise test cod
Part 6: Fabric manufacturing machinery
AMENDMENT 1
TC 72
ISO 9902-7:2001 /A 1:2009 ( Ed 1 )
Textile machinery
Noise test cod Part 7: Dyeing and finishing machinery
AMENDMENT 1
Lista mensal > projectos de normas
58/70
1Junho 2009
projecto de normas
Lista mensal > projectos de normas
59/70
1Junho 2009
projecto de normas
6.2 Comités Técnicos da ISO
Lista dos Comités Técnicos da Organização Internacional de Normalização (ISO) em relação aos quais não existe ONS
(Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para
consulta no IPQ
ISO/TC 4
Rolling bearings
ISO/TC 67
ISO/TC 12
Materials, equipment and offshore structures for
Quantities, units, symbols, conversion factors
petroleum and natural gas industries
ISO/TC 14
ISO/TC 70
Shafts for machinery and accessories
Internal combustion engines
ISO/TC 19
ISO/TC 81
Preferred numbers
Common names for pesticides and other agrochemicals
ISO/TC 20
ISO/TC 83
Aircraft and space vehicles
Sports and recreation equipment
ISO/TC 24
Sieves, sieving and other sizing methods
ISO/TC 85
Nuclear energy
ISO/TC 25
Cast iron and pig iron
ISO/TC 86
Refrigeration
ISO/TC 36
Cinematography
ISO/TC 100
Chains and chain wheels for power transmission and
ISO/TC 37
conveyors
Terminology (principles and coordination)
ISO/TC 101
ISO/TC 41
Continuous mechanical handling equipment
Pulleys and belts (including veebelts)
ISO/TC 102
ISO/TC 42
Iron ores
Photography
ISO/TC 110
ISO/TC 47
Industrial trucks
Chemistry
ISO/TC 112
ISO/TC 48
Vacuum technology
Laboratory glassware and related apparatus
ISO/TC 113
ISO/TC 57
Hydrometric determinations
Metrology and properties of surfaces
ISO/TC 114
ISO/TC 59
Horology
Building construction
ISO/TC 115
ISO/TC 60
Pumps
Gears
ISO/TC 116
ISO/TC 65
Space heating appliances
Manganese and chromium ores
Lista mensal > projectos de normas
60/70
1Junho 2009
projecto de normas
ISO/TC 117
Fluorspar
Industrial fans
ISO/TC 177
Caravans
ISO/TC 118
ISO/TC 179
Compressors, pneumatic tools and pneumatic machines
Masonry
ISO/TC 182
ISO/TC 119
Geotechnics
Powder metallurgy
ISO/TC 183
ISO/TC 120
Copper, lead and zinc ores and concentrates
Leather
ISO/TC 184
ISO/TC 123
Industrial automation systems and integration
Plain bearings
ISO/TC 185
ISO/TC 127
Safety devices for protection against excessive pressure
Earth-moving machinery
ISO/TC 190
ISO/TC 131
Soil quality
Fluid power systems
ISO/TC 191
ISO/TC 132
Humane animal (mammal) traps
Ferroalloys
ISO/TC 192
ISO/TC 137
Gas turbines
Sizing system, designations and marking for boots and
shoes
ISO/TC 195
Building construction machinery and equipment
ISO/TC 153
Valves
ISO/TC 197
Hydrogen energy technologies
ISO/TC 154
Documents and data elements in administration,
ISO/TC 202
commerce and industry
Microbeam analysis
ISO/TC 155
ISO/TC 203
Nickel and nickel alloys
Technical energy systems
ISO/TC 163
ISO/TC 204
Thermal insulation
Transport information and control systems
ISO/TC 166
ISO/TC 205
Ceramic ware, glassware and glass ceramic ware in
Building environmental design
contact with food
ISO/TC 206
Fine ceramics
ISO/TC 167
Steel and aluminium structures
ISO/TC 207
Management environnemental
ISO/TC 170
Surgical instruments
ISO/TC 208
Thermal turbines for industrial application (steam
ISO/TC 173
turbines, gas expansion turbines)
Technical systems and aids for disabled or handicapped
persons
ISO/TC 174
Jewellery
ISO/TC 175
Lista mensal > projectos de normas
61/70
1Junho 2009
projecto de normas
Lista mensal > projectos de normas
62/70
1Junho 2009
projecto de normas
7. Projectos de Norma e propostas de estudo de novas Normas da Comissão
Electrotécnica Internacional (IEC)
Os projectos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos.
7.1 Projectos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
TC 13B
IEC 60092-3:1965 /A 3:1973 ( Ed 2.0 )
IEC 60051-2:1984 ( Ed 4.0 )
Electrical installations in ships Part 3: Cables (construction, testing
Direct acting indicating analogue electrical measuring instruments
and installations)
and their accessories
Part 2: Special requirements for ammeters and voltmeters
TC 18A
IEC 60092-3:1965 /A 4:1974 ( Ed 2.0 )
TC 13B
Electrical installations in ships Part 3: Cables (construction, testing
IEC 60051-3:1984 ( Ed 4.0 )
and installations)
Direct acting indicating analogue electrical measuring instruments
and their accessories
TC 18A
Part 3: Special requirements for wattmeters and varmeters
IEC 60092-3:1965 /A 5:1979 ( Ed 2.0 )
Electrical installations in ships Part 3: Cables (construction, testing
TC 13B
and installations)
IEC 60051-4:1984 ( Ed 4.0 )
Direct acting indicating analogue electrical instruments and their
TC 18A
accessories Part 4: Special requirements for frequency meters
IEC 60092-3:1965 /A 6:1984 ( Ed 2.0 )
Electrical installations in ships Part 3: Cables (construction, testing
TC 13B
and installations)
IEC 60051-5:1985 ( Ed 4.0 )
Direct acting indicating analogue electrical measuring instruments
TC 18A
and their accessories Part 5: Special requirements for phase
IEC 60092-201:1994 ( Ed 4.0 )
meters, power factor meters and synchroscopes
Electrical installations in ships Part 201: System design - General
TC 13B
TC 18A
IEC 60051-6:1984 ( Ed 4.0 )
IEC 60092-350:2008 ( Ed 3.0 )
Direct acting indicating analogue electrical measuring instruments
Electrical installations in ships
and their accessories Part 6: Special requirements for ohmmeters
Part 350: General construction and test methods of power, control
(impedance meters) and conductance meters
and instrumentation cables for shipboard and offshore applications
TC 13B
TC 18A
IEC 60051-7:1984 ( Ed 4.0 )
IEC 60092-351:2004 ( Ed 3.0 )
Direct acting indicating analogue electrical measuring instruments
Electrical installations in ships Part 351: Insulating materials for
and their accessories Part 7: Special requirements for multi-function
shipboard and offshore units, power, control, instrumentation,
instruments
telecommunication and data cables
TC 13B
TC 18A
IEC 60051-8:1984 ( Ed 4.0 )
IEC 60092-352:2005 ( Ed 3.0 )
Direct acting indicating analogue electrical measuring instruments
Electrical installation in ships Part 352: Choice and installation of
and their accessories Part 8: Special requirements for accessories
electrical cables
TC 13B
TC 18A
IEC 60051-9:1988 ( Ed 4.0 )
IEC 60092-353:1995 ( Ed 2.0 )
Direct acting indicating analogue electrical measuring instruments
Electrical installations in ships Part 353: Single and multicore
and their accessories
non-radial field power cables with extruded solid insulation for
Part 9: Recommended test methods
rated voltages 1 kV and 3 kV
TC 18A
TC 18A
IEC 60092-3:1965 /A 1:1969 ( Ed 2.0 )
IEC 60092-353:1995 /A 1:2001 ( Ed 2.0 )
Electrical installations in ships Part 3: Cables (construction, testing
Electrical installations in ships Part 353: Single and multicore
and installations)
non-radial field power cables with extruded solid insulation for
rated voltages 1 kV and 3 kV
TC 18A
IEC 60092-3:1965 /A 2:1971 ( Ed 2.0 )
TC 18A
Electrical installations in ships
IEC 60092-354:2003 ( Ed 2.0 )
Part 3: Cables (construction, testing and installations)
Electrical installations in ships Part 354: Single- and three-core
power cables with extruded solid insulation for rated voltages
TC 18A
6kV (Um = 7,2 kV) up to 30kV (Um = 36kV)
Lista mensal > projectos de normas
63/70
1Junho 2009
projecto de normas
TC 18A
TC 62C
IEC 60092-359:1987 ( Ed 1.0 )
IEC 61676:2002 /A 1:2008 ( Ed 1 )
Electrical installations in ships Part 359: Sheathing materials for
Medical electrical equipment - Dosimetric instruments used for
shipboard power and telecommunication cables
non-invasive measurement of X-ray tube potential in diagnostic
radiology
TC 18A
IEC 60092-359:1987 /A 1:1994 ( Ed 1.0 )
TC 86A
Electrical installations in ships Part 359: Sheathing materials for
IEC 60794-3-10:2009 ( Ed 2.0 )
shipboard power and telecommunication cables
Optical fibre cables Part 3-10: Outdoor cables - Family specification
for duct, directly buried or lashed aerial optical telecommunication
TC 18A
cables
IEC 60092-359:1987 /A 2:1999 ( Ed 1.0 )
Electrical installations in ships Part 359: Sheathing materials for
TC 86A
shipboard power and telecommunication cables
IEC 60794-3-20:2009 ( Ed 2.0 )
Optical fibre cables Part 3-20: Outdoor cables - Family
TC 18A
specification for optical self-supporting aerial telecommunication
IEC 60092-373:1977 ( Ed 1.0 )
cables
Electrical installations in ships - Shipboard telecommunication
cables and radio-frequency cables. Shipboard flexible coaxial cables
TC 10
IEC 60074:1963 ( Ed 2.0 )
TC 18A
IEC 60092-374:1977 ( Ed 1.0 )
TC 14
Electrical installations in ships - Shipboard telecommunication
IEC 60076-1:1993 ( Ed 2.0 )
cables and radio-frequency cables. Telephone cables for
Power transformers Part 1: General
non-essential communication services
TC 14
TC 18A
IEC 60076-1:1993 /A 1:1999 ( Ed 2.0 )
IEC 60092-375:1977 ( Ed 1.0 )
Power transformers Part 1: General
Electrical installations in ship - Shipboard telecommunication
cables and radio-frequency cables. General instrumentation,
TC 14
control and communication cables
IEC 60076-2:1993 ( Ed 2.0 )
Power transformers Part 2: Temperature rise
TC 18A
IEC 60092-376:2003 ( Ed 2.0 )
TC 14
Electrical installations in ships Part 376: Cables for control and
IEC 60076-3:2000 ( Ed 2.0 )
instrumentation circuits 150/250 V (300 V)
Power transformers Part 3: Insulation levels, dielectric tests and
external clearances in air
TC 34A
IEC 60081:1997 ( Ed 5.0 )
TC 14
Double-capped fluorescent lamps - Performance specifications
IEC 60076-4:2002 ( Ed 1 )
Power transformers Part 4: Guide to the lightning impulse and
TC 34A
switching impulse testing - Power transformers and reactors
IEC 60081:1997 /A 1:2000 ( Ed 5.0 )
Double-capped fluorescent lamps - Performance specifications
TC 14
IEC 60726:1982 ( Ed 1.0 )
TC 34A
IEC 60081:1997 /A 2:2003 ( Ed 5.0 )
TC 14
Double-capped fluorescent lamps - Performance specifications
IEC 60726:1982 /A 1:1986 ( Ed 1.0 )
TC 34A
TC 16
IEC 60081:1997 /A 3:2005 ( Ed 5.0 )
IEC 60073:2002 ( Ed 6.0 )
Double-capped fluorescent lamps - Performance specifications
Basic and safety principles for man-machine interface, marking and
identification - Coding principles for indicators and actuators
TC 37A
IEC 61643-21:2000 /A 1:2008 ( Ed 1.0 )
TC 18
Low voltage surge protective devices Part 21: Surge protective
IEC 60092-3:1965 ( Ed 2.0 )
devices connected to telecommunications and signalling networks -
Electrical installations in ships Part 3: Cables (construction, testing
Performance requirements and testing methods
and installations)
TC 47E
TC 18
IEC 60747-16-3:2002 /A 1:2009 ( Ed 1.0 )
IEC 60092-101:1994 ( Ed 4.0 )
Semiconductor devices Part 16-3: Microwave integrated circuits -
Electrical installations in ships Part 101: Definitions and general
Frequency converters
requirements
TC 59K
TC 18
IEC 60350:1999 /A 2:2008 ( Ed 2.0 )
IEC 60092-101:1994 /A 1:1995 ( Ed 4.0 )
Electric cooking ranges, hobs, ovens and grills for household use
Electrical installations in ships Part 101: Definitions and general
- Methods for measuring performance
requirements
TC 62C
TC 18
IEC 61676:2002 ( Ed 1.0 )
IEC 60092-202:1994 ( Ed 4.0 )
Medical electrical equipment - Dosimetric instruments used for
Electrical installations in ships Partie 202: System design -
non-invasive measurement of X-ray tube potential in diagnostic
Protection
radiology
Lista mensal > projectos de normas
64/70
1Junho 2009
projecto de normas
TC 18
IEC 60092-401:1980 /A 1:1987 ( Ed 3.0 )
IEC 60092-202:1994 /A 1:1996 ( Ed 4.0 )
Electrical installations in ships Part 401: Installation and test of
Electrical installations in ships Part 202: System design - Protection
completed installation
TC 18
TC 18
IEC 60092-204:1987 ( Ed 3.0 )
IEC 60092-401:1980 /A 2:1997 ( Ed 3.0 )
Electrical installations in ships Part 204: System design - Electric
Electrical installations in ships Part 401: Installation and test of
and electrohydraulic steering gear
completed installation
TC 18
IEC 60092-301:1980 ( Ed 3.0 )
TC 18
Electrical installations in ships Part 301: Equipment - Generators
IEC 60092-501:2007 ( Ed 4.0 )
and motors
Electrical installations in ships Part 501: Special features - Electric
propulsion plant
TC 18
IEC 60092-301:1980 /A 1:1994 ( Ed 3.0 )
TC 18
Electrical installations in ships Part 301: Equipment - Generators
IEC 60092-502:1999 ( Ed 5.0 )
and motors
Electrical installations in ships Part 502: Tankers - Special features
TC 18
TC 18
IEC 60092-301:1980 /A 2:1995 ( Ed 3.0 )
IEC 60092-503:2007 ( Ed 2.0 )
Electrical installations in ships Part 301: Equipment - Generators
Electrical installations in ships
and motors
Part 503: Special features - AC supply systems with voltages in
the range of above 1 kV up to and including 15 kV
TC 18
IEC 60092-302:1997 ( Ed 4.0 )
TC 18
Electrical installations in ships Part 302: Low-voltage switchgear
IEC 60092-504:2001 ( Ed 3.0 )
and controlgear assemblies
Electrical installations in ships Part 504: Special features - Control
and instrumentation
TC 18
IEC 60092-303:1980 ( Ed 3.0 )
TC 18
Electrical installations in ships Part 303: Equipment - Transformers
IEC 60092-506:2003 ( Ed 2.0 )
for power and lighting
Electrical installations in ships Part 506: Special features - Ships
carrying specific dangerous goods and materials hazardous only in
TC 18
bulk
IEC 60092-303:1980 /A 1:1997 ( Ed 3.0 )
Electrical installations in ships
TC 18
Part 303: Equipment - Transformers for power and lighting
IEC 60092-507:2008 ( Ed 2.0 )
Electrical installations in ships Part 507: Small vessels
TC 18
IEC 60092-304:1980 ( Ed 3.0 )
TC 21
Electrical installations in ships Part 304: Equipment -
IEC 60095-1:2006 ( Ed 7.0 )
Semiconductor convertors
Lead-acid starter batteries Part 1: General requirements and methods
of test
TC 18
IEC 60092-304:1980 /A 1:1995 ( Ed 3.0 )
TC 21
Electrical installations in ships Part 304: Equipment -
IEC 60095-4:2008 ( Ed 2.0 )
Semiconductor convertors
Lead-acid starter batteries Part 4: Dimensions of batteries for heavy
vehicles
TC 18
IEC 60092-305:1980 ( Ed 3.0 )
TC 28
Electrical installations in ships Part 305: Equipment - Accumulator
IEC 60071-2:1996 ( Ed 3.0 )
(storage) batteries
Insulation co-ordination Part 2: Application guide
TC 18
TC 28
IEC 60092-305:1980 /A 1:1989 ( Ed 3.0 )
IEC/TR 60071-4:2004 ( Ed 1.0 )
Electrical installations in ships Part 305: Equipment - Accumulator
Insulation co-ordination Part 4: Computational guide to insulation
(storage) batteries
co-ordination and modelling of electrical networks
TC 18
TC 28
IEC 60092-306:1980 ( Ed 3.0 )
IEC/TS 60071-5:2002 ( Ed 1.0 )
Electrical installations in ships Part 306: Equipment - Luminaires
Insulation co-ordination Part 5: Procedures for high-voltage direct
and accessories
current ( HVDC) converter stations
TC 18
TC 29
IEC 60092-307:1980 ( Ed 3.0 )
IEC 60118-0:1983 ( Ed 2.0 )
Electrical installations in ships Part 307: Equipment - Heating and
Hearing aids Part 0: Measurement of electroacoustical
cooking appliances
characteristics
TC 18
TC 29
IEC 60092-401:1980 ( Ed 3.0 )
IEC 60118-0:1983 /A 1:1994 ( Ed 2.0 )
Electrical installations in ships Part 401: Installation and test of
Hearing aids Part 0: Measurement of electroacoustical
completed installation
characteristics
TC 18
TC 29
Lista mensal > projectos de normas
65/70
1Junho 2009
projecto de normas
IEC 60118-2:1983 ( Ed 2.0 )
IEC 60099-4:2004 ( Ed 2.0 )
Hearing aids Part 2: Hearing aids with automatic gain control
Surge arresters Part 4: Metal-oxide surge arresters without gaps for
circuits
a.c. systems
TC 29
TC 37
IEC 60118-2:1983 /A 1:1993 ( Ed 2.0 )
IEC 60099-4:2004 ( Ed 2.0 )
Hearing aids Part 2: Hearing aids with automatic gain control
Surge arresters Part 4: Metal-oxide surge arresters without gaps for
circuits
a.c. systems
TC 29
TC 37
IEC 60118-2:1983 /A 2:1997 ( Ed 2.0 )
IEC 60099-4:2004 /A 1:2006 ( Ed 2.0 )
Hearing aids Part 2: Hearing aids with automatic gain control
Surge arresters
circuits
Part 4: Metal-oxide surge arresters without gaps for a.c. systems
TC 29
TC 37
IEC 60118-3:1983 ( Ed 2.0 )
IEC 60099-4:2004 /A 2:2009 ( Ed 2.0 )
Hearing aids Part 3: Hearing aid equipment not entirely worn on the
Surge arresters Part 4: Metal-oxide surge arresters without gaps for
listener
a.c. systems
TC 29
TC 37
IEC 60118-4:2006 ( Ed 2.0 )
IEC 60099-5:1996 ( Ed 1.0 )
Electroacoustics - Hearing aids Part 4: Induction loop systems for
Surge arresters Part 5: Selection and application recommendations
hearing aid purposes - Magnetic field strength
TC 37
TC 29
IEC 60099-5:1996 /A 1:1999 ( Ed 1.0 )
IEC 60118-5:1983 ( Ed 1.0 )
Surge arresters Part 5: Selection and application recommendations
Hearing aids Part 5: Nipples for insert earphones
TC 37
TC 29
IEC 60099-6:2002 ( Ed 1.0 )
IEC 60118-8:2005 ( Ed 2.0 )
Surge arresters Part 6: Surge arresters containing both series and
Electroacoustics - Hearing aids Part 8: Methods of measurement of
parallel gapped structures - Rated 52 kV and less
performance characteristics of hearing aids under simulated in situ
working conditions
TC 37
IEC/TR 60099-3:1990 ( Ed 1.0 )
TC 29
Surge arresters Part 3: Artificial pollution testing of surge arresters
IEC 60118-9:1985 ( Ed 1.0 )
Hearing aids Part 9: Methods of measurement of characteristics of
TC 39
hearing aids with bone vibrator output
IEC 60067:1966 ( Ed 2.0 )
Dimensions of electronic tubes and valves
TC 29
IEC 60118-13:2004 ( Ed 2.0 )
TC 40
Electroacoustics - Hearing aids Part 13: Electromagnetic
IEC 60062:2004 ( Ed 5.0 )
compatibility (EMC)
Marking codes for resistors and capacitors
TC 29
TC 40
IEC 60118-14:1998 ( Ed 1.0 )
IEC 60115-1:2008 ( Ed 4.0 )
Hearing aids Part 14:Specification of a digital interface
Fixed resistors for use in electronic equipment Part 1: Generic
specification
TC 29
IEC 61094-2:2009 ( Ed 2.0 )
TC 40
Electroacoustics - Measurement microphones Part 2: Primary method
IEC 60115-2:1982 ( Ed 1.0 )
for the pressure calibration of laboratory standard microphones by
Fixed resistors for use in electronic equipment Part 2: Sectional
the reciprocity technique
specification: Fixed low-power non-wirewound resistors
TC 33
TC 40
IEC 60110-1:1998 ( Ed 1.0 )
IEC 60115-2-1:1982 ( Ed 1.0 )
Power capacitors for induction heating installations Part 1: General
Fixed resistors for use in electronic equipment
Part 2: Blank detail specification: Fixed low-power non-wirewound
TC 33
resistors- Assessment level E
IEC/TS 60110-2:2000 ( Ed 1.0 )
Power capacitors for induction heating installations Part 2: Ageing
TC 40
test, destruction test and requirements for disconnecting internal
IEC 60115-2-2:1992 ( Ed 1.0 )
fuses
Fixed resistors for use in electronic equipment Part 2: Blank detail
specification: Fixed low-power non-wirewound resistor - Assessment
TC 37
level F
IEC 60099-1:1991 ( Ed 3.0 )
Surge arresters Part 1: Non-linear resistor type gapped surge
TC 40
arresters for a.c. systems
IEC 60115-4:1982 ( Ed 2.0 )
Fixed resistors for use in electronic equipment Part 4: Sectional
TC 37
specification: Fixed power resistors
IEC 60099-1:1991 /A 1:1999 ( Ed 3.0 )
Surge arresters Part 1: Non-linear resistor type gapped surge
TC 40
arresters for a.c. systems
IEC 60115-4:1982 /A 1:1993 ( Ed 2.0 )
Fixed resistors for use in electronic equipment Part 4: Sectional
TC 37
specification: Fixed power resistors
Lista mensal > projectos de normas
66/70
1Junho 2009
projecto de normas
IEC 60115-6-2:1983 ( Ed 1.0 )
TC 40
Fixed resistors for use in electronic equipment Part 6: Blank detail
IEC 60115-4-1:1983 ( Ed 1.0 )
specification: Fixed resistor networks with individually measurable
Fixed resistors for use in electronic equipment Part 4: Blank detail
resistors, of either resistance values or rated dissipations -
specification: Fixed power resistor - Assessment level E
Assessment level E
TC 40
TC 40
IEC 60115-4-1:1983 /A 1:1993 ( Ed 1.0 )
IEC 60115-6-101:1992 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 4: Blank detail
Fixed resistors for use in electronic equipment Part 6: Detail
specification: Fixed power resistors - Assessment level E
specification: Fixed thick film resistor networks with individually
measurable resistors, all of equal value and equal dissipation, class
TC 40
1 (dual-in-line network)
IEC 60115-4-2:1992 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 4: Blank detail
TC 40
specification: Fixed power resistors - Assessment level F
IEC 60115-6-102:1992 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 6: Detail
specification: Fixed thick film resistor networks with individually
TC 40
measurable resistors, all of equal value and equal dissipation, class 1
IEC 60115-4-3:1993 ( Ed 1.0 )
(single-in-line network)
Fixed resistors for use in electronic equipment Part 4: Blank detail
specification: Fixed power resistors, heat-sink types - Assessment
TC 40
level H
IEC 60115-7:1984 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 7: Sectional
TC 40
specification: Fixed resistor networks in which not all resistors are
IEC 60115-4-101:1995 ( Ed 1.0 )
individually measurable
Fixed resistors for use in electronic equipment Part 4: Detail
specification: Fixed power wirewound resistors with solderable axial
TC 40
wire leads - Stability class 5%. Assessment level E
IEC 60115-7-1:1984 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 7: Blank detail
TC 40
specifications: Fixed resistors networks in which not all resistors
IEC 60115-4-102:1995 ( Ed 1.0 )
are individually measurable - Assessment level E
Fixed resistors for use in electronic equipment Part 4: Detail
specification: Fixed power wirewound resistors with solderable axial
TC 40
wire leads - Stability class 1% Assessment level E
IEC 60115-8:1989 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 8: Sectional
TC 40
specification: Fixed chip resistors
IEC 60115-5:1982 ( Ed 2.0 )
Fixed resistors for use in electronic equipment Part 5: Sectional
TC 40
specification: Fixed precision resistors
IEC 60115-8:2009 ( Ed 2.0 )
Fixed resistors for use in electronic equipment Part 8: Sectional
TC 40
specification - Fixed surface mount resistors
IEC 60115-5-1:1983 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 5: Blank detail
TC 40
specification: Fixed precision resistors - Assessment level E
IEC 60115-8-1:1989 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 8: Blank detail
TC 40
specification: Fixed chip resistors - Assessment level E
IEC 60115-5-2:1992 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 5: Blank detail
TC 40
specification: Fixed precision resistors - Assessment level F
IEC 60115-9:2003 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 9: Sectional
TC 40
specification - Fixed surface mount resistor networks with
IEC 60115-5-101:1995 ( Ed 1.0 )
individually measurable resistors
Fixed resistors for use in electronic equipment Part 5: Detail
specification: Fixed precision wirewound resistors with solderable
TC 40
axial wire leads - Stability class 0,1% - Assessment level E
IEC 60115-9-1:2003 ( Ed 1.0 )
Fixed resistors for use in electronic equipment Part 9-1: Blank
TC 40
detail specification: Fixed surface mount resistor networks with
IEC 60115-6:1983 ( Ed 1.0 )
individually measurable resistors - Assessment level EZ
Fixed resistors for use in electronic equipment Part 6: Sectional
specification - Fixed resistor networks with individually measurable
TC 42
resistors
IEC 60052:2002 ( Ed 3.0 )
Voltage measurement by means of standard air gaps
TC 40
IEC 60115-6:1983 /A 1:1987 ( Ed 1.0 )
TC 46
Fixed resistors for use in electronic equipment Part 6: Sectional
IEC 60966-2-3:2009 ( Ed 3.0 )
specification - Fixed resistor networks with individually measurable
Radio frequency and coaxial cable assemblies Part 2-3: Detail
resistors
specification for flexible coaxial cable assemblies - Frequency
range 0 to 1 000 MHz, IEC 61169-8 connectors
TC 40
IEC 60115-6-1:1983 ( Ed 1.0 )
TC 46
Fixed resistors for use in electronic equipment Part 6: Blank detail
IEC 60966-2-4:2009 ( Ed 3.0 )
specification: Fixed resistor networks with individually measurable
Radio frequency and coaxial cable assemblies Part 2-4: Detail
resistors, all of equal value and equal dissipatio - Assessment level E
specification for cable assemblies for radio and TV receivers -
Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors
TC 40
Lista mensal > projectos de normas
67/70
1Junho 2009
projecto de normas
TC 46
Part 9: Recommended test methods
IEC 60966-2-5:2009 ( Ed 3.0 )
Radio frequency and coaxial cable assemblies Part 2-5: Detail
TC 86
specification for cable assemblies for radio and TV receivers -
IEC 62496-1:2008 ( Ed 1.0 )
Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors
Optical circuit boards Part 1: General
TC 46
TC 91
IEC 60966-2-6:2009 ( Ed 3.0 )
IEC 60097:1991 ( Ed 4.0 )
Radio frequency and coaxial cable assemblies Part 2-6: Detail
Grid systems for printed circuits
specification for cable assemblies for radio and TV receivers -
Frequency range 0 to 3 000 MHz, IEC 61169-24 connectors
TC 100
IEC 60094-1:1981 ( Ed 4.0 )
TC 46
Magnetic tape sound recording and reproducing systems Part 1:
IEC 60966-3-1:2009 ( Ed 3.0 )
General conditions and requirements
Radio frequency and coaxial cable assemblies Part 3-1: Blank detail
specification for semi-flexible coaxial cable assemblies
TC 100
IEC 60094-3:1979 ( Ed 1.0 )
TC 49
Magnetic tape sound recording and reproducing systems Part 3:
IEC 60689:2008 ( Ed 2.0 )
Methods of measuring the characteristics of recording and
Measurement and test methods for tunig fork quartz crystal units in
reproducing equipment for sound on magnetic tape
the range from 10 kHz to 200 kHz and standard values
TC 55
TC 100
IEC 60851-3:2009 ( Ed 3.0 )
IEC 60094-3:1979 /A 2:1988 ( Ed 1.0 )
Winding wires - Test methods Part 3: Mechanical properties
Magnetic tape sound recording and reproducing systems Part 3:
Methods of measuring the characteristics of recording and
TC 61
reproducing equipment for sound on magnetic tape
IEC 60335-2-31:2002 ( Ed 4.0 )
Household and similar electrical appliances - Safety Part 2-31:
TC 100
Particular requirements for range hoods and other cooking fume
IEC 60094-6:1985 ( Ed 1.0 )
extractors
Magnetic tape sound recording and reproducing systems Part 6: Reel
to reel systems
TC 61
IEC 60335-2-31:2002 /A 2:2008 ( Ed 4.0 )
TC 100
Household and similar electrical appliances - Safety Part 2-31:
IEC 60094-7:1986 ( Ed 1.0 )
Particular requirements for range hoods and other cooking fume
Magnetic tape sound recording and reproducing systems Part 7:
extractors
Cassette for commercial tape records and domestic use
TC 61
TC 100
IEC 60335-2-80:2002 ( Ed 2.0 )
IEC 60094-10:1988 ( Ed 1.0 )
Household and similar electrical appliances - Safety Part 2-80:
Magnetic tape sound recording and reproducing systems Part 10:
Particular requirements for fans
Time and address codes
TC 61
TC 100
IEC 60335-2-80:2002 /A 2:2008 ( Ed 2.0 )
IEC 60094-11:1988 ( Ed 1.0 )
Household and similar electrical appliances - Safety Part 2-80:
Magnetic tape sound recording and reproducing systems Part 11:
Particular requirements for fans
Address code for compact cassettes
TC 82
TC 100
IEC 60904-7:2008 ( Ed 3.0 )
IEC 60107-1:1997 ( Ed 3.0 )
Photovoltaic devices Part 7: Computation of the spectral mismatch
Methods of measurement on receivers for television broadcast
correction for measurements of photovoltaic devices
transmissions Part 1: General considerations - Measurements at
radio and video frequencies
TC 85
IEC 60051-1:1997 ( Ed 5.0 )
TC 100
Direct acting indicating analogue electrical measuring instruments
IEC 60107-2:1997 ( Ed 2.0 )
and their accessories Part 1: Definitions and general requirements
Methods of measurement on receivers for television broadcast
common to all parts
transmissions Part 2: Audio channels - General methods and
methods for monophonic channels
TC 85
IEC 60051-3:1984 /A 1:1994 ( Ed 4.0 )
TC 100
Direct acting indicating analogue electrical measuring instruments
IEC 60107-3:1988 ( Ed 1.0 )
and their accessories Part 3: Special requirements for wattmeters
Recommended methods of measurement on receivers for television
and varmeters
broadcast transmissions Part 3: Electrical measurements on
multichannel sound television receivers using subcarrier systems
TC 85
IEC 60051-9:1988 /A 1:1994 ( Ed 4.0 )
TC 100
Direct acting indicating analogue electrical measuring instruments
IEC 60107-4:1988 ( Ed 1.0 )
and their accessories
Recommended methods of measurement on receivers for television
Part 9: Recommended test methods
broadcast transmissions Part 4: Electrical measurements on
multichannel sound television receivers using the two-carrier
TC 85
FM-system
IEC 60051-9:1988 /A 2:1995 ( Ed 4.0 )
Direct acting indicating analogue electrical measuring instruments
TC 100
and their accessories
IEC 60107-4:1988 /A 1:1999 ( Ed 1.0 )
Lista mensal > projectos de normas
68/70
1Junho 2009
projecto de normas
Recommended methods of measurement on receivers for television
TC 104
broadcast transmissions Part 4: Electrical measurements on
IEC 60068-2-38:2009 ( Ed 2.0 )
multichannel sound television receivers using the two-carrier
Environmental testing Part 2-38: Tests - Test Z/AD: Composite
FM-system
temperature/humidity cyclic test
TC 100
TC 111
IEC 60107-5:1992 ( Ed 1.0 )
IEC 62321:2008 ( Ed 1.0 )
Recommended methods of measurement on receivers for television
Electrotechnical products - Determination of levels of six
broadcast transmissions Part 5: Electrical measurements on
regulated substances (lead, mercury, cadmium, hexavalent
multichannel sound television receivers using the NICAM
chromium, polybrominated biphenyls, polybrominated diphenyl
two-channel digital sound-system
ethers)
TC 100
IEC 60107-5:1992 /A 1:1999 ( Ed 1.0 )
Recommended methods of measurement on receivers for television
broadcast transmissions Part 5: Electrical measurements on
multichannel sound television receivers using the NICAM
two-channel digital sound-system
TC 100
IEC 60107-6:1989 ( Ed 1.0 )
Recommended methods of measurement on receivers for television
broadcast transmissions Part 6: Measurements under conditions
different from broadcast signal standards
TC 100
IEC 60107-7:1997 ( Ed 1.0 )
Methods of measurement on receivers for television Part 7: HDTV
displays
TC 104
IEC 60068-1:1988 ( Ed 6.0 )
Environmental testing. Part 1: General and guidance
TC 104
IEC 60068-1:1988 /A 1:1992 ( Ed 6.0 )
Environmental testing. Part 1: General and guidance
TC 104
IEC 60068-2-14:2009 ( Ed 6.0 )
Environmental testing Part 2-14: Tests - Test N: Change of
temperature
Lista mensal > projectos de normas
69/70
1Junho 2009
projecto de normas
8. Projectos de Normas da Organização Internacional de Normalização
(ISO)/Comissão Electrotécnica internacional (IEC)
Os projectos de norma estão organizados por “Comité Técnico conjunto” ISO/IEC.
8.1 Projectos em inquérito público
Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários.
LISTA VAZIA
Lista mensal > projectos de normas
70/70
1Junho 2009
Document Outline
