Original PDF Flash format a-consumer/'s-guide:-get-your-power-from-the-sun-(brochure)  


A Consumer/'s Guide: Get Your Power From The Sun (brochure)

A Consumer’s Guide
Get Your Power from theSun
Bringing you a prosperous future where energy is clean, abundant, reliable, and affordable
Contents
Background
What is a solar electric or photovoltaic system? . . . . . . . . . . . . . . . .2
Are incentives available to help reduce the cost? . . . . . . . . . . . . . . . .3
Investing in a PV system
Why should you buy a PV system? . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Is your home or business a good place for a PV system? . . . . . . . . . .5
How big should your PV system be, and what features
should it have? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
How much will you save with your PV system? . . . . . . . . . . . . . . . . .8
How much does a PV system cost? . . . . . . . . . . . . . . . . . . . . . . . . . . .8
How can you finance the cost of your PV system? . . . . . . . . . . . . . .9
Selecting a PV provider
Who sells and installs PV systems? . . . . . . . . . . . . . . . . . . . . . . . . . .11
How do you choose among PV providers? . . . . . . . . . . . . . . . . . . . .11
How do you choose among competing bids? . . . . . . . . . . . . . . . . . .12
Is the lowest price the “best deal”? . . . . . . . . . . . . . . . . . . . . . . . . . .13
Before connecting a PV system to the grid
What should you know about permits? . . . . . . . . . . . . . . . . . . . . . .14
What should you know about insurance? . . . . . . . . . . . . . . . . . . . .14
How do you get an interconnection agreement? . . . . . . . . . . . . . . .14
How do you get a net-metering agreement? . . . . . . . . . . . . . . . . . . .15
What should you know about utility and inspection sign-off? . . . .16
What should you know about warranties? . . . . . . . . . . . . . . . . . . . .16
Getting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Cover photo: This PV system, integrated into an awning over the
back porch of a home in California, generates electricity while
shading the family's outdoor activities. (Courtesy of AstroPower/PIX12345)
Photo opposite: These PV modules are light and flexible, which
makes them suitable for roofing shingles.
This Consumer’s Guide is based on a state-specific guide written
by Tom Starrs and Howard Wenger for the California Energy
Commission, which was supported, in part, by the National
Renewable Energy Laboratory in Golden, Colorado.
ii
Get Your Power from theSun
Are you thinking about buying a solar electric system for your home or busi-
ness? If so, this booklet provides some basic information that can help you.
Solar electric systems, which are also called photovoltaic or PV systems,
are reliable and pollution-free. They make use of a renewable source of ener-
gy—the sun. And PV systems for homes and businesses are becoming more
affordable all the time.
PV works best in an energy-efficient building. So, adding insulation and ener-
gy-efficient lighting, appliances, and windows is a good idea, to reduce your
home’s overall electricity use before you install a PV system.
To make PV systems even more affordable, several states offer financial incen-
tives through solar rebates and other programs. Some utilities have net meter-
ing programs, which further enhance the economics of PV. Net metering
means that when your PV system generates more power than you need, the
excess goes to the utility grid and the meter runs backward. This allows you
to receive full retail value for the power that your PV system generates.
This booklet can guide you through the process of buying a solar electric sys-
tem. It is not a technical guide to designing or installing a system—for that
information, we recommend consulting an experienced PV system designer
or supplier.
A PV system can be a substantial investment. As with any investment, careful
planning will help you make the right decisions for your home or business.
etz, NREL/PIX06283
en Gr
rr
Wa
1
Background
What is a solar electric or
technology the U.S. energy source
photovoltaic system?
of choice for the 21st century.
Photovoltaic (PV) systems convert
The basic building block of PV tech-
sunlight directly to electricity. They
nology is the solar “cell.” Multiple
work any time the sun is shining,
PV cells are connected to form a PV
but more electricity is produced
“module,” the smallest PV compo-
when the sunlight is more intense
nent sold commercially. Modules
and strikes the PV modules directly
range in power output from about
(as when rays of sunlight are perpen-
10 watts to 300 watts. A PV system
dicular to the PV modules). Unlike
connected or “tied” to the utility
solar thermal systems for heating
grid has these components:
water, PV does not use the sun's
heat to make electricity. Instead,
• One or more PV modules, which
electrons freed by the interaction
are connected to an inverter
of sunlight with semiconductor
• The inverter, which converts the
materials in PV cells are captured
system's direct-current (DC) elec-
in an electric current.
tricity to alternating current (AC)
PV allows you to produce electricity—
• Batteries (optional) to provide
without noise or air pollution—from
energy storage or backup power
a clean, renewable resource. A PV
in case of a power interruption
system never runs out of fuel, and it
or outage on the grid.
won't increase U.S. oil imports. Many
PV system components are manufac-
AC electricity is compatible with
tured right here in the United States.
the utility grid. It powers our lights,
These characteristics could make PV
appliances, computers, and televisions.
Solar
Panels
Inverter
Utility
Service
Meter
Home Power/
Appliances
03529701
Residential grid-connected PV system
2
Special appliances that run directly
Are incentives available to
on DC power are available, but they
help reduce the cost?
can be expensive.
Yes, many states offer incentives.
Before you decide to buy a PV system,
For specific information, call one of
there are some things to consider:
the contacts listed under “Getting
Help” at the end of this booklet.
First, PV produces power intermit-
Another excellent source is the
tently because it works only when
National Database of State Incent-
the sun is shining. This is not a prob-
ives for Renewable Energy (DSIRE).
lem for PV systems connected to the
Prepared by the North Carolina Solar
utility grid, because any additional
Center, this database contains infor-
electricity required is automatically
mation on financial and regulatory
delivered to you by your utility. In
incentives that promote renewable
the case of non-grid, or stand-alone,
energy technologies.
PV systems, batteries can be pur-
chased to store energy for later use.
Net Metering—In more than 35
states, customers who own PV sys-
Second, if you live near existing
tems can benefit from laws and
power lines, PV-generated electricity
regulations that require “net” electric
is usually more expensive than con-
meter reading. The customer is billed
ventional utility-supplied electricity.
for the net electricity purchased from
Although PV now costs less than
the utility over the entire billing
1% of what it did in the 1970s, the
period—that is, the difference
amortized price over the life of the
between the electricity coming from
system is still about 25 cents per
the power grid and the electricity
kilowatt-hour. This is double to
generated by the PV system. Through
quadruple what most people pay for
net metering, the customer obtains
electricity from their utilities. A solar
the full retail electricity rate—rather
rebate program and net metering can
than the much lower wholesale
help make PV more affordable, but
rate—for kilowatt-hours of PV-pro-
they can't match today's price for
duced electricity sent to the utility
utility electricity in most cases.
power grid. The benefits of net
Finally, unlike the electricity you
metering to consumers are especially
purchase monthly from a utility, PV
significant in areas such as Hawaii
power requires a high initial invest-
and New York, which have high
ment. This means that buying a PV
retail electric rates. Utilities also
system is like paying years of electric
benefit because the solar-generated
bills up front. Your monthly electric
energy often coincides with their
bills will go down, but the initial
periods of “peak” demand for
expense of PV may be significant.
electricity.
By financing your PV system, you
Property and Sales Tax—Tax
can spread the cost over many years,
incentives may include a sales tax
and rebates can also lighten your
exemption on the PV system pur-
financial load.
chase, a property tax exemption,
or state personal income-tax credits,
3
PV awnings such as this one in California provide both
oPower/PIX12346
electricity and shade.
Astr
all of which provide an economic
growth. In the United States, the
benefit to consumers by lowering
U.S. Department of Energy has been
high capital costs. The U.S. govern-
involved in a program known as
ment also provides financial support
TEAM-UP, or Technology Experience
for PV technology through a tax
to Accelerate Markets in Utility
credit for commercial uses of solar
Photovoltaics. Through this program,
energy. This energy investment credit
some 80 utilities in 40 states have
provides businesses (but not individ-
installed more than 7 megawatts
uals or utilities) with a 10% tax credit
of grid-connected PV; supplier buy-
and 5-year accelerated depreciation
downs and consumer rebates range
for the cost of equipment used to
between $2 and $4 per watt.
generate solar electricity.
Residential Energy Rate—This
Buy-Down—Rebates and buy-
is the average retail residential rate
downs, typically based on the rated
for energy from utilities, in cents
power of the system, help to defray
per kilowatt-hour. Check your utility
high capital costs and to create
bill for your actual rate.
competitive, sustainable market
4
Investing in a PV system
Why should you buy a PV
location looks promising, your PV
system?
provider can determine whether your
home or business can effectively use
People decide to buy PV systems for
a PV system.
a variety of reasons. Some people
want to help preserve the Earth's
The orientation of your PV system
finite fossil-fuel resources and reduce
(the compass direction that your sys-
air pollution. Others want to invest
tem faces) affects its performance. In
in an energy-producing improve-
the United States, the sun is always
ment to their property. Some people
in the southern half of the sky but is
like the security of reducing the
higher in the summer and lower in
amount of electricity they buy from
the winter. Usually, the best location
their utility because it makes them
for a PV system is a south-facing
less vulnerable to future price
roof, but roofs that face east or west
increases. And some people just
may also be acceptable. Flat roofs
appreciate the independence that
also work well for solar electric sys-
a PV system provides.
tems, because PV modules can be
mounted flat on the roof facing the
If you plan to build a home away
sky or bolted on frames tilted toward
from an established utility service,
the south at an optimal angle. They
inquire about the cost of installing
can also be attached directly to the
a utility line. Often, the cost of
roof as “PV shingles.”
extending conventional power to
your residence is higher than the
If a rooftop can't be used, your solar
cost of a solar option.
modules can also be placed on the
ground, either on a fixed mount or
Whatever your reason, solar energy
a “tracking” mount that follows the
is widely thought to be the energy
sun to orient the PV modules. Other
source of choice for the future, and
options (often used in multifamily
you may be able to take advantage
or commercial applications) include
of a state-sponsored program to help
mounting structures that create cov-
make it your energy choice for today
ered parking, or that provide shade
and tomorrow.
as window awnings.
Is your home or business a
Is your site free from shading by
good place for a PV system?
trees, nearby buildings, or other
Can you locate your system
obstructions?
so it works well?
To make the best use of your PV sys-
A well-designed PV system needs
tem, the PV modules must have a
clear and unobstructed access to the
clear “view” of the sun for most or
sun's rays for most or all of the day,
all of the day—unobstructed by trees,
throughout the year. You can make
roof gables, chimneys, buildings, and
an initial assessment yourself. If the
other features of your home and the
5
surrounding landscape. Some poten-
cost more. System sizing, discussed
tial sites for your PV system may
later in this booklet, should also be
be bright and sunny during certain
discussed with your PV provider.
times of the day, but shaded during
other times. Such shading may sub-
What kind of roof do you have,
stantially reduce the amount of elec-
and what is its condition?
tricity that your system will produce.
Some types of roofs are simpler and
To be eligible for some rebates, your
cheaper to work with, but a PV sys-
system must be unshaded between
tem can be installed on any type.
certain hours during certain times of
Typically, roofs with composition
the year. Some states have laws that
shingles are the easiest to work with,
establish your right to protect your
and those with slate are the most
solar access through the creation of
difficult. In any case, an experienced
a “solar easement.” Your PV provider
solar installer will know how to
can help you determine whether
work on all types and can use roof-
your site is suitable for a solar
ing techniques that eliminate any
electric system.
possibility of leaks. Ask your PV
provider how the PV system affects
Does your roof or property
your roof warranty.
contain a large enough area
for the PV system?
If your roof is older and needs to be
The amount of space that a PV
replaced in the near future, you may
system needs depends on the size
want to replace it at the time the PV
of the system you purchase. Some
system is installed to avoid the cost
residential systems require as little
of removing and reinstalling your
as 50 square feet (for a small “starter”
PV system. PV panels often can be
system), but others could need as
integrated into the roof itself, and
much as 1,000 square feet.
some modules are actually designed
Commercial systems are typically
as three-tab shingles or raised-seam
even larger. If your location limits
metal roof sections. One benefit of
the size of your system, you may
these systems is their ability to offset
want to install one that uses more
the cost of roof materials.
efficient PV modules. Greater effi-
How big should your PV
ciency means that the module needs
less surface area to convert sunlight
system be, and what features
into a given amount of electric
should it have?
power. PV modules are available
To begin, consider what portion of
in a range of types, and some offer
your current electricity needs you
more efficiency per square foot
would like your PV system to meet.
than others do (see table on the
For example, suppose that you would
next page). Although the efficiency
like to meet 50% of your electricity
(percent of sunlight converted to
needs with your PV system. You
electricity) varies with the different
could work with your PV provider
types of PV modules available today,
to examine past electric bills and
higher efficiency modules typically
6
determine the size of the PV system
produced by your system on an
needed to achieve that goal.
annual basis (see the section on net
metering). Finally, customers eligible
You can contact your utility and
for net metering vary from utility to
request the total electricity usage,
utility; for example, net metering
measured in kilowatt-hours, for your
could be allowed for residential cus-
household or business over the past
tomers only, commercial customers
12 months (or consult your electric
only, or both.
bills if you save them). Ask your PV
provider how much your new PV
One optional feature to consider is
system will produce per year (also
a battery system to provide energy
measured in kilowatt-hours) and
storage (for stand-alone systems) or
compare that number to your annual
backup power in case of a utility
electricity usage (called demand) to
power outage (for grid-connected
get an idea of how much you will
systems). Batteries add value to your
save. In the next section, we'll pro-
system, but at an increased price.
vide more information on estimating
how much you will save.
As a rule, the cost per kilowatt-hour
goes down as you increase the size
Some solar rebate programs are
of the system. For example, many
capped at a certain dollar amount.
inverters are sized for systems up to
Therefore, a solar electric system
5 kilowatts, so even if your PV array
that matches this cap maximizes
is smaller (say, 3 kilowatts), you may
the benefit of the solar rebate.
have to buy the same size of inverter.
Labor costs for a small system may
To qualify for net metering in some
be nearly as much as those for a large
service territories, your PV system
system, so you are likely to get a bet-
must have a peak generating capacity
ter price for installing a 2-kilowatt
that is typically not more 10 kilo-
system all at once, rather than
watts (10,000 watts), although this
installing 1 kilowatt each year for
peak may differ from state to state.
two years.
Also, utilities have different provi-
sions for buying excess electricity
Roof Area Needed in Square Feet (shown in Bold Type)
PV Module
Efficiency (%)
PV Capacity Rating (Watts)
100
250
500
1,000
2,000
4,000
10,000
4
30
75
150
300
600
1,200
3,000
8
15
38
75
150
300
600
1,500
12
10
25
50
100
200
400
1,000
16
8
20
40
80
160
320
800
For example, to generate 2,000 watts from a 12%-efficient system, you need 200 square feet of roof area.
7
How much will you save
electricity will not be worth as much
with your PV system?
as the electricity you actually use.
You may earn only 2 cents per
The value of your PV system's elec-
kilowatt-hour—or less than half the
tricity depends on how much you
retail rate—for your excess power.
pay for electricity now and how
much your utility will pay you for
PV systems produce most of their
any excess power that you generate.
electricity during the middle of the
If your utility offers net metering
day, when residential electric loads
(and so pays the full retail price for
tend to be small. If your utility does
your excess electricity), you and your
not offer net metering, you may
utility will pay the same price for
want to size your system to avoid
each other's electricity. You can use
generating electricity significantly
the calculation box on the next page
beyond your actual needs.
to roughly estimate how much elec-
tricity your PV system will produce
How much does a PV
and how much that electricity will
system cost?
be worth. Actual energy production
No single answer applies in every
from your PV system will vary by up
case. But a solar rebate and other
to 20% from these figures, depending
incentives can always reduce the
on your geographic location, the
cost. Your price depends on a num-
angle and orientation of your system,
ber of factors, including whether
the quality of the components, and
your home is under construction and
the quality of the installation.
whether PV is integrated into the
Also, you may not get full retail
roof or mounted on top of an exist-
value for excess electricity produced
ing roof. The price also depends on
by your system on an annual basis,
the PV system rating, manufacturer,
even if your utility does offer net
retailer, and installer.
metering. Be sure to discuss these
The size of your system may be the
issues with your PV provider. Request
most significant factor in any meas-
a written estimate of the average
urement of costs versus benefits.
annual energy production from the
Small, single-PV-panel systems with
PV system. However, even if an esti-
built-in inverters that produce about
mate is accurate for an average year,
75 watts may cost around $900
actual electricity production will
installed, or $12 per watt. These
fluctuate from year to year because
small systems offset only a small
of natural variations in weather
fraction of your electricity bill. A
and climate.
2-kilowatt system that meets nearly
If your utility does not offer net
all the needs of a very energy-
metering, you can still use the calcu-
efficient home could cost $16,000
lation box to determine the amount
to $20,000 installed, or $8 to $10 per
of electricity your system will
watt. At the high end, a 5-kilowatt
produce. However, this is not as
system that completely meets the
straightforward, because the excess
energy needs of many conventional
8
Calculating Electricity Bill Savings for a Net-Metered PV System
• Determine the system's size in kilowatts (kW). A reasonable range is from
1 to 5 kW. This value is the “kW of PV” input for the equations below.
• Based on your geographic location, select the energy production factor
from the map below for the “kWh/kW-year” input for the equations.
Energy from the PV system = (kW of PV) x (kWh/kW-year) = kWh/year
Divide this number by 12 if you want to determine your monthly energy reduction.
Energy bills savings = (kWh/year) x (Residential Rate)/
100 = $/year saved
(Residential Rate in this above equation should be in dollars per kWh; for example,
a rate of 10 cents per kWh is input as $0.10/kWh.)
For example, a 2-kW system in Denver, CO, at a residential energy rate of
$0.07/kWh will save about $266 per year: 1,900 kWh/kW-year x $0.07/kWh
x 2 kW = $266/year.
Note: The uncertainty of the
contoured values is generally ±10%.
In mountainous and other areas of
complex terrain, the uncertainty may
be higher.
homes can cost $30,000 to $40,000
How can you finance the cost
installed, or $6 to $8 per watt. These
of your PV system?
prices are rough estimates; your
When it comes to financing the cost
costs depend on your system's con-
of purchasing and installing your
figuration, your equipment options,
PV system, there are some special
and other factors. Your local PV
programs particular to financing
providers can give you more accurate
solar and other renewable energy
estimates or bids.
9
This 20-kilowatt PV system produces electricity for the common
areas of a shopping center in Cambridge, Massachusetts.
Schott Applied Power Corp./PIX08808
investments. But most of the
relatively simple. It is also one way
options will be familiar to you.
to avoid additional loan application
forms and fees.
The best way to finance PV systems
for homes is through a mortgage
If mortgage financing is not avail-
loan. Mortgage financing options
able, look for other sources of fin-
include your primary mortgage; a
ancing, such as conventional bank
second mortgage, such as a U.S.
loans. Seek the best possible combi-
Department of Housing and Urban
nation of low rate and long term.
Development (HUD) Title 1 loan; or
This allows you to amortize your PV
a home-equity loan that is secured
system as inexpensively as possible.
by your property. There are two
Because your PV system is a long-
advantages to mortgage financing.
term investment, the terms and
First, mortgage financing usually pro-
conditions of your financing are
vides longer terms and lower interest
likely to be the most important
rates than other loans, such as con-
factor in determining the effective
ventional bank loans. Second, the
price of your PV-generated power.
interest paid on a mortgage loan is
generally deductible on your federal
PV systems for businesses are proba-
taxes (subject to certain conditions).
bly best financed through a compa-
If you buy the PV system for your
ny's existing sources of funds for
home at the same time that you
capital purchases—such as Small
build, buy, or refinance the home,
Business Administration loans or
adding the cost of the PV system to
conventional bank loans.
your mortgage loan is likely to be
10
Selecting a PV provider
Who sells and installs PV
should have the lowest travel costs).
systems?
Contact these providers and find out
what products and services they offer.
In some areas, finding a PV provider
The following questions may give you
can be as simple as picking up the
a good sense of their capabilities:
telephone directory and looking
under “Solar Energy Equipment and
Has the company installed grid-
Systems—Dealers.” However, many
connected PV systems? If not,
of the listings are solar water-heating
has it installed grid-independent
companies and many companies
(or stand-alone) PV systems?
might not be experienced in PV sys-
tem design or installation. Similarly,
Experience in installing grid-
many electrical contractors, although
connected systems is valuable
proficient in typical electrical con-
because some elements of the instal-
tracting work, might not have expert-
lation—particularly interconnection
ise in PV or residential roof-mounting
with the local utility—are unique
techniques. How do you identify solar
to these systems. Because grid-
electric system providers? Here are
connected systems are relatively
several suggestions.
uncommon, however, most contrac-
tors with PV experience have worked
• Check the Source Guide for renew-
only on stand-alone systems. So,
able energy businesses (including
they have experience with all aspects
PV) by name, product type, business
of PV system installation except
type, and location: http://energy.
connection with the utility grid.
sourceguides.com/index.shtml
However, a competent company
with PV experience should not be
• Contact the Solar Energy Industries
eliminated just because it has not
Association (SEIA) at 202-628-7745
yet installed grid-connected PV.
for a list of solar service providers.
Experience with off-grid systems is
• Contact your utility company
valuable, because grid-independent
to see which vendors it might
systems are more technically com-
recommend.
plex than grid-tied systems.
• Conduct a search on the Internet.
How many years of experience
Reputable, professional contractors
does the company have installing
with experience in PV systems are
PV systems?
the best choice for the actual
This issue speaks for itself: A contrac-
installation.
tor who has been in business a long
time probably understands how to
How do you choose among
work with customers and to compete
PV providers?
effectively with other firms.
Compile a list of prospective PV
providers. (Those closest to you
11
Is the company properly licensed?
can tell you about any judgments or
PV systems should be installed by
complaints against a state-licensed
an appropriately licensed contractor.
electrician. Consumers should call
This usually means that either the
the city and county they live in for
installer or a subcontractor has an
information on how to evaluate con-
electrical contractor's license. Your
tractors. The Better Business Bureau
State Electrical Board can tell you
is another source of information.
whether a contractor has a valid
electrician's license. Local building
How do you choose among
departments might also require that
competing bids?
the installer have a general contrac-
If you decide to get more than one
tor's license. Call the city or county
bid for the installation of your PV
you live in for additional informa-
system (always a good idea), make
tion on licensing.
sure that all bids are made on the
same basis. For example, a bid for a
A solar rebate program may require
system mounted on the ground is
that, in addition to being properly
usually very different from another
licensed, installers must demonstrate
bid for a rooftop system.
that they have special knowledge
about installing PV systems. This spe-
Similarly, some PV modules generate
cial knowledge may be demonstrated
more electricity per square foot than
in one of the following ways:
others. Bids should clearly state the
maximum generating capacity of the
• Possession of a solar contractor
system (measured in watts or kilo-
specialty license, issued by a local
watts). If possible, have the bids spec-
building jurisdiction, that recog-
ify the system capacity in “AC watts”
nizes—through testing or other
under a standard set of test condi-
means—special knowledge of PV
tions, or specify the output of the
systems
system at the inverter.
• Certification in PV systems by a
Also request an estimate of the
group such as the state chapter
amount of energy that the system
of SEIA
will produce on an annual basis
• A letter from the PV system manu-
(measured in kilowatt-hours).
facturer stating that the installer
Because the amount of energy
has the experience and training
depends on the amount of sun-
needed to install the system
light—which varies by location, sea-
properly.
son, and year to year—it’s unlikely
the contractor will quote a specific
Does the company have any
figure, but a range of ±20% is realis-
pending or active judgments
tic. Bids also should include the total
or liens against it?
cost of getting the PV system up and
As with any project that requires a
running, including hardware, instal-
contractor, due diligence is recom-
lation, connection to the grid, per-
mended. Your state electrical board
mitting, sales tax, and warranty.
12
Your warranty is a very important
factor for evaluating bids. A solar
rebate program may require that
systems be covered by a two-year
parts-and-labor written installation
warranty, for example, in addition
to any manufacturers' warranties on
specific components. The installer
may offer longer warranties. Also, ask
yourself, “Will this company stand
behind the full-system warranty for
the next two years?”
Is the lowest price the “best
deal”?
It might not be. You generally get
what you pay for, and it's possible
that a low price could be a sign of
inexperience. Companies that plan
to stay in business must charge
enough for their products and
A home in the woods of New
services to cover their costs, plus a
Hampshire had too much shade
fair profit margin. Therefore, price
to use PV on the roof. The
should not be the only considera-
solution was installing a
d/PIX09507
tion, and quality should probably
rank high on the list.
freestanding PV array.
Alan For
13
Before connecting a PV system to the grid
What should you know about
rely on Article 690 for guidance in
permits?
determining whether your PV system
has been properly designed and
If you live where a homeowners asso-
installed. If you are one of the first
ciation must approve a solar electric
people in your community to install
system, you or your PV provider may
a grid-connected PV system, your
need to submit your plans. You’ll
local building department may not
need approval before you begin
have experience in approving one
installing your PV system. However,
of these systems. If this is the case,
some state laws stipulate that you
you and your PV provider can speed
have the right to install a solar
the process by working closely with
electric system on your home.
building officials to bring them up
You will probably need to obtain per-
to speed on the technology.
mits from your city or county building
department. These include a building
What should you know about
permit, an electrical permit, or both.
insurance?
Typically, your PV provider will take
For grid-connected PV systems, your
care of this, rolling the price of the
electric utility will require that you
permits into the overall system price.
enter into an interconnection agree-
However, in some cases, your PV
ment (see also the next section).
provider may not know how much
Usually, these agreements set forth the
time or money will be involved in
minimum insurance requirements to
“pulling” a permit. If so, this task
keep in force. If you are buying a PV
may be priced on a time-and-materi-
system for your home, your standard
als basis, particularly if additional
homeowner’s insurance policy is
drawings or calculations must be
usually adequate to meet the utility’s
provided to the permitting agency.
requirements. However, if insurance
In any case, make sure the permit-
coverage becomes an issue, contact
ting costs and responsibilities are
one of the groups listed in the Getting
addressed at the start with your PV
Help section.
provider before installation begins.
How do you get an
Code requirements for PV systems
interconnection agreement?
vary somewhat from one jurisdiction
Connecting your PV system to the
to the next, but most are based on
utility grid will require an intercon-
the National Electrical Code (NEC).
nection agreement and a purchase
Article 690 in the NEC spells out
and sale agreement. Federal law and
requirements for designing and
some state public utility commission
installing safe, reliable, code-compliant
regulations require utilities to supply
PV systems. Because most local
you with an interconnection agree-
requirements are based on the NEC,
ment. Some utilities have developed
your building inspector is likely to
14
simplified, standardized interconnec-
Practice for Utility Interface of
tion agreements for small-scale PV
Photovoltaic Systems. Institute of
systems.
Electrical and Electronic Engineers,
Inc., New York, NY (1998).
The interconnection agreement speci-
fies the terms and conditions under
• Underwriters Laboratories, UL
which your system will be connected
Subject 1741: Standard for Static
to the utility grid. These include your
Inverters and Charge Controllers for
obligation to obtain permits and insur-
Use in Photovoltaic Power Systems
ance, maintain the system in good
(First Edition). Underwriters
working order, and operate it safely.
Laboratories, Inc., Northbrook, IL
The purchase and sale agreement spec-
(December 1997).
ifies the metering arrangements, the
You don’t need to fully understand
payment for any excess generation,
these standards, but your PV provider
and any other related issues.
and utility should. It is your obliga-
The language in these contracts
tion to make sure that your PV
should be simple, straightforward,
provider uses equipment that com-
and easy to understand. If you are
plies with the relevant standards,
unclear about your obligations under
however, so be sure to discuss this
these agreements, contact the utility
issue.
or your electrical service provider for
clarification. If your questions are
How do you get a net-
not answered adequately, contact
metering agreement?
one of the groups in the Getting
Some utilities offer customers with
Help section.
PV systems the option to net meter
National standards for utility inter-
the excess power generated by the
connection of PV systems are being
PV system. As noted, this means that
adopted by many local utilities. The
when the PV system generates more
most important of these standards
power than the household can use,
focuses on inverters. Traditionally,
the utility pays the full retail price
inverters simply converted the DC
for this power in an even swap as the
electricity generated by PV modules
electric meter spins backward, and
to the AC electricity we use in our
your PV power goes into the grid.
homes. More recently, inverters have
Net metering allows eligible cus-
evolved into remarkably sophisticat-
tomers with PV systems to connect
ed devices to manage and condition
to the grid with their existing single
power. Many new inverters contain
meter. Almost all standard utility
all the protective relays, disconnects,
meters can measure the flow of
and other components necessary to
energy in either direction. The meter
meet the most stringent national
spins forward when electricity is
standards. Two of these standards are
flowing from the utility into the
particularly relevant:
building and spins backward when
• Institute of Electrical and Electronic
power is flowing from the building
Engineers, P929: Recommended
to the utility.
15
For example, in one utility program,
the system size, because you may want
customers are billed monthly for the
to limit generating excess electricity.
“net” energy consumed. If the cus-
Such a “dual metering” arrangement is
tomer’s net consumption is negative
the norm for industrial customers who
in any month (i.e., the PV system
generate their own power.
produces more energy than the cus-
tomer uses), the balance is credited
What should you know about
to subsequent months. Once a year,
utility and inspection sign-off?
on the anniversary of the effective
After your new PV system is
date of the interconnection agree-
installed, it must be inspected and
ment, the utility pays the customer
“signed off” by the local permitting
for any negative balance at its whole-
agency (usually a building or electri-
sale or “avoided cost” for energy,
cal inspector) and most likely by
which may be quite small, perhaps
the electric utility with which you
less than 2 cents per kilowatt-hour.
entered into an interconnection
Net metering allows customers to get
agreement. Inspectors may require
more value from the energy they
your PV provider to make corrections
generate. It also simplifies both the
(which is fairly common in the con-
metering process (by eliminating the
struction business). A copy of the
need for a second meter) and the
building permit showing the final
accounting process (by eliminating
inspection sign-off may be required
the need for monthly payments from
to qualify for a solar rebate program.
your utility). Be sure to ask your
utility about its policy regarding
What should you know about
net metering.
warranties?
Under the federal Public Utility
Warranties are key to ensuring that
Regulatory Policies Act (PURPA), utili-
your PV system will be repaired if
ties must allow you to interconnect
something should malfunction dur-
your PV system. They must also buy
ing the warranty period. PV systems
any excess electricity you generate,
eligible for some solar rebate pro-
beyond what you use in your home or
grams must carry a full (not “limit-
business. If your utility does not offer
ed”) two-year warranty, in addition
net metering, it will probably require
to any manufacturers’ warranties on
you to use two meters: one to measure
specific components. This warranty
the flow of electricity into the build-
should cover all parts and labor,
ing, the other to measure the flow of
including the cost of removing any
electricity out of the building. If net
defective component, shipping it to
metering is not available, the utility
the manufacturer, and reinstalling
will pay you only a wholesale rate for
the component after it is repaired
your excess electricity. This provides a
or replaced. The rebate program’s
strong incentive to use all the electrici-
two-year warranty requirement
ty you generate so that it offsets elec-
supersedes any other warranty
tricity you would otherwise have to
limitations. In other words, even if
purchase at the higher retail rate. This
the manufacturer’s warranty on a
may be a factor in how you optimize
particular component is less than
16
two years, the system vendor must
Know the financial arrangements,
provide you with a two-year warran-
such as contractor's bonds, that
ty. Similarly, even if the manufactur-
ensure the warranty will be honored.
er’s warranty is a limited warranty
(A warranty does not guarantee that
that does not include the cost of
the company will remain in busi-
removing, shipping, and reinstalling
ness). Find out whom to contact
defective components, the system
if there is a problem. Under some
vendor must cover these costs if
solar rebate programs, vendors must
the retailer/vendor also installed
provide documentation on system
the system.
and component warranty coverage
and claims procedures. To avoid any
Be sure you know who is responsible
later misunderstandings, be sure to
for honoring the various warranties
read the warranty carefully and
associated with your system—the
review the terms and conditions
installer, the dealer, or the manufac-
with your retailer/vendor.
turer. The vendor should disclose the
warranty responsibility of each party.
Getting Help
For more information on solar electric
This Web site has a listing of state
systems, please contact:
Public Utility Commissions that you
National Association of State Energy
may contact.
Officials (NASEO)
Solar Energy Industries Association (SEIA)
1414 Prince Street
1616 H Street, N.W., Suite 800
Suite 200
Washington, DC 20006
Alexandria, Virginia 22314
Phone: 202-628-7745 • Fax: 202-628-7779
Phone: 703-299-8800 • Fax: 703-299-6208
www.seia.org
www.naseo.org/members/states.htm
The Solar Energy Industries Association
Check the above Web site to find the
is the national trade association of the
contact for your state energy office,
solar industry. Many states have a state
which typically promotes the develop-
chapter of the national SEIA organiza-
ment and use of renewable energy
tion, which can be found on SEIA’s
resources in your state. The office might
Web site.
offer technical assistance, sponsor work-
shops and forums, and provide general
Other helpful Web sites
information to resident energy con-
Solar Energy Technologies Program:
sumers on renewable energy resources
www.eere.energy.gov/solar
and applications.
National Center for Photovoltaics:
National Association of Regulatory and
www.nrel.gov/ncpv
Utility Commissioners (NARUC)
Million Solar Roofs: www.millionsolar-
1101 Vermont, N.W.
roofs.com
Suite 200
Washington, DC 20005
Database of State Incentives for
Phone: 202-898-2200 • Fax: 202-898-2213
Renewable Energy (DSIRE):
www.naruc.org
www.dsireusa.org
17
About the Office of Energy Efficiency and Renewable Energy
A Strong Energy Portfolio for a Strong America
Energy efficiency and clean, renewable energy will mean a stronger economy, a
cleaner environment, and greater energy independence for America. By investing in
technology breakthroughs today, our nation can look forward to a more resilient
economy and secure future.
Far-reaching technology changes will be essential to America's energy future.
Working with a wide array of state, community, industry, and university partners,
the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy
invests in a portfolio of energy technologies that will:
• Conserve energy in the residential, commercial, industrial, government, and transporta-
tion sectors
• Increase and diversify energy supply, with a focus on renewable domestic sources
• Upgrade our national energy infrastructure
• Facilitate the emergence of hydrogen technologies as vital new "energy carriers."
The Opportunities
Biomass Program—Using domestic, plant-derived resources to meet our fuel,
power, and chemical needs
Building Technologies Program—Homes, schools, and businesses that use less
energy, cost less to operate, and, ultimately, generate as much power as they use
Distributed Energy & Electric Reliability Program—A more reliable energy
infrastructure and reduced need for new power plants
Federal Energy Management Program—Leading by example, saving energy
and taxpayer dollars in federal facilities
FreedomCAR & Vehicle Technologies Program—Less dependence on foreign
oil, and eventual transition to an emissions-free, petroleum-free vehicle
Geothermal Technologies Program—Tapping the Earth's energy to meet
our heat and power needs
Hydrogen, Fuel Cells & Infrastructure Technologies Program—Paving the
way toward a hydrogen economy and net-zero carbon energy future
Industrial Technologies Program—Boosting the productivity and competitiveness
of U.S. industry through improvements in energy and environmental performance
Solar Energy Technology Program—Utilizing the sun's natural energy to
generate electricity and provide water and space heating
Weatherization & Intergovernmental Program—Accelerating the use of today's
best energy-efficient and renewable technologies in homes, communities, and businesses
Wind & Hydropower Technologies Program—Harnessing America's abundant
natural resources for clean power generation
To learn more, visit www.eere.energy.gov
The National Renewable Energy Laboratory,
a DOE national laboratory, produced this Consumer’s Guide for:
U.S. Department of Energy
Office of Energy Efficiency and Renewable Energy
1000 Independence Avenue, S.W.
Washington, D.C. 20585
December 2003 • DOE/GO-102003-1844

Document Outline