AUTOMATIC UV CURING SYSTEMS
UH202/
UH202-12 AUTOMATIC UV
CURING SYSTEMS
With high power and extremely fast curing in affordable, small-profile
packages, the Models UH202/UH202-12 UV Curing Systems offer the
ultimate degree of control with the greatest ease of use. The systems
feature fully programmable automatic operation and safeguards,
including interference detection and auto-detection of vacant slots
in the frame magazine, eliminating virtually all operator variables.
ULTRON SYSTEMS, INC.
STANDARD FEATURES
The high power UV lamp dramatically reduces UV exposure
• Fully automatic single cassette operation
times mak ing these units ideal for a mid to high volume
Wafer/Frame Workstage
• Optional single frame adapter for rapid proto-
production en vi ron ment. With a 9-second cycle time for
typing and testing
the Model UH202 (12-seconds for the Model UH202-12), in-
• Easily programmable microprocessor-based
clud ing loading and un load ing, and adjustable UV ex po sure,
controller with rotatable touch panel interface
a 25-frame magazine can be com plet ed in about 4 minutes
• Adjustable exposure aperture
(6 minutes for the Model UH202-12). The fast cycle time is
• Auto-Detection of vacant slots in frame mag a zine
facilitated by a one-step wafer trans fer. While load ing the
• Interference detection
cured wafer into the frame magazine, the transfer arm is
• High Intensity (up to 300W/in for UH202 and 400W/
al ready in position to load the next wafer/frame.
in for UH202-12) 365nm UV Lamp
TouchPanel LCD Display
• Stores 10 programs/recipes with password
protected level access
• Up to 8” Wafer (UH202) or 12" Wafer (UH202-12)
capability with rapid frame/ magazine size in ter-
change
PGV-Ready (Model UH202-12)
• Lamp temperature indicator
• Fast and easy replacement UV lamp change
• Maintenance safety interlock
SPECIFICATIONS
MODEL UH202
The Model UH202/UH202-12 UV Curing Sys tems were de-
signed with a focus on power and speed, how ev er, safety
Height:
41 inches
was not compromised in any way. A pre ci sion lamp tem-
Width:
54 inches
per a ture mon i tor pre vents the lamp from over heat ing, shut-
Depth:
31 inches
ting off UV lamp power if nec es sary. A cooling fan re mains
Weight:
410 lbs.
on until the tem per a ture reaches a safe level be fore power
is avail able for the lamp to refi re. In addition, a me chan i cal
UH202-12
thermo-switch pre vents temperature run away in case of
an elec tron ics fail ure. The Models UH202/UH202-12 also
Height:
42 inches
fea ture a built-in shutter and me chan i cal door interlock to
Width:
75 inches
pre vent accidental UV light exposure. The Model UH202-12
Depth:
39 inches
is also PGV-ready with optional docking station.
Weight:
650 lbs.
Lamp Intensity:
320 mW/cm2 min
SERVICE REQUIREMENTS
Power:
220VAC, single phase
17A (UH202)
Gas Controls and Lamp Indicators
30A (UH202-12)
Cover Gas: N , 60PSI reg u lat ed
2
The Models UH202/UH202-12 combine the best el e ments
Air
:
60PSI reg u lat ed
of power, speed, safety, and pre ci sion in a fl ex i ble produc-
tion tool.
ULTRON SYSTEMS, INC.
Specifi cations subject to change.
Offer the highest degree of control and
versatility for even the most stringent
Other Ultron Products
mounting requirements in affordable and
easy to use benchtop packages. The
recetnly redesigned series is even more
compact than its predecessors.
Model UH115/
All of the models feature uniform, bubble-
free lamination and a digital temperature
UH115-8
controller for consistent workstage tem-
Wafer/Frame
peratures and repeatable results. Adjust-
able alignment pins and vacuum cups ac-
Film Applicators
commodate almost any type of film frame,
including plastic. The workstage height
is also adjustable relative to the frame
height for different wafer thicknesses.
Has the advantage of high adhesive
strength -- for the securing of wafers/
UV Adhesive
substrates during sawing -- which is sig-
Plastic Film
nificantly reduced after UV light exposure
to facilitate die removal. We are proud to
Series
offer the widest selection of UV film avail-
able to meet your process requirements.
Models
Are inexpensive solutions for the curing of
UV film, yet do not compromise control or
UH102/UH102-12
versatility. They include a nitrogen blan-
UV Curing
ket to assure complete curing of the UV
adhesive, a microprocessor-based
Systems
programmable controller, a lamp inten-
sity measurement port, and a serpen-
tine-style grid lamp for even, consistent
UV-exposure.
ULTRON SYSTEMS, INC.
5105 MAUREEN LANE, MOORPARK, CALIFORNIA 93021-1783
PHONE: (805) 529-1485 • FAX: (805) 523-1061
INTERNET: http://www.ultronsystems.com
